Do you need plumbers putty if you have a rubber gasket?

The rubber gasket should be sufficient to seal without putty.

Where does the rubber gasket go on a sink drain?





A: The rubber black washer goes directly below the sink, then the paper washer, then the nut.

How do you seal a drain assembly?

Youtube quote:Completely by hand once installed it's even easier to use simply press to seal. And again to open you can even hear this seal push and seal guarantees a tight no leak seal each and every use.

Can you use Teflon tape on a sink drain?

Youtube quote:Works out really well and sometimes I just put this on just to just to make sure so I don't have to pull it apart.

Can you use silicone on rubber gasket?

Gasket maker or silicone sealant should never be used as a glue or means of keeping a gasket in position when you reassemble your engine. Mechanics often do this believing, erroneously, that a gasket maker will not only hold the gasket in place, but it will add to the seal.

Can I use silicone sealant instead of plumbers putty?





Can I Use Silicone Instead of Plumbers Putty? Silicone offers a wider range of uses than plumber’s putty and some advanced benefits. In most situations where you would use a plumber’s putty, you could also use silicone as a replacement.

How do you fix a leaky bathroom sink drain?

Drain-assembly leaks are the most difficult to repair and will likely require you to call your plumber. To fix this type of “leaking pipe under bathroom sink,” the P-trap is removed first and then the drain is removed. Wrap the drain threads with plumber’s tape and reinstall the drain and P-trap.

How do you replace a bathroom sink gasket?

Youtube quote:Use the channel lock pliers to unscrew the nut at the bottom of the drain. Now remove the rubber gasket. Now pull out the drain. Clean any excess plumber's putty from the sink hole.

How do you tighten a sink gasket?

Youtube quote:And then underneath it from the bottom will come the cardboard washer and then we'll tighten this by hand and once it's on good by hand we'll tighten it really nice and good with the wrench.

Do you put plumbers tape on plastic fittings?



Don’t use Teflon tape, Teflon paste or pipe dope. Do use a sealant. Teflon tape, Teflon paste and pipe dope is intended for metal pipe and fittings. Metal to metal fitting joints are more difficult to tighten than plastic; the surfaces tend to gall without the aid of such lubricants as Teflon or pipe dope.

Do you need Teflon tape for bathroom sink?

Youtube quote:You don't use teflon tape because what you do is you end up putting this on tightening it up and then the little spigot tightens up on the gasket.

What is the difference between white and pink Teflon tape?

Pink Plumbers



Just like the name implies, this PTFE tape is most commonly used by plumbers and pipe fitters. It is color coded pink to signify that this tape is a heavier duty tape than the standard white thread seal tape.

How many times do you wrap Teflon tape?



Step 4: How many times the thread seal tape will go around the pipe depends on the thickness of the tape, but for the standard variety, about five or six wraps should be enough for the job.

What kind of tape do you use for plumbing?

Teflon tape

What Is Plumber’s Tape? Plumber’s tape, often called Teflon tape, (polytetrafluoroethylene, or PTFE) helps you get a watertight seal on threaded pipe joints.

Can you use pipe thread sealant and Teflon tape together?

Go ahead and wrap Teflon tape around the male threads just like always. Then add pipe thread sealant as shown. The pipe thread sealant will fill any gaps caused by tape failures. It’s cheap insurance against a leak.

Which is better pipe joint compound or Teflon tape?



Pipe joint compound is easy to find, fairly simple to use, and inexpensive. It works with all types of pipe and fitting materials, and it produces a strong seal. Pipe dope is generally stronger seal than Teflon tape, which is why plumbers and other professionals use it rather than tape for seals that are permanent.

Which is better Teflon tape or paste?

When working with fittings with straight threads, paste dope should always be used. Tape dope is too thick, and can actually prevent a good seal in straight thread joints. Paste dope will spread and be pushed out of the way, and will not prevent the threads from properly engaging.

Will silicone seal a water leak?

Silicone would seem at first glance to be a good choice of sealant for leaks that might appear on the hull or deck of a boat. This is because silicone-based sealants have good properties, such as better chemical resistance and higher tensile strength than comparable polyurethane-based products.

Will plumbers putty stop a leak?

Plumber’s putty seals the parts to prevent leaks. A common location for leaks, and thus putty, is around toilets and drains. Putty also helps seal the drains for sinks and tubs.