What are the factors to be considered while selecting building materials?
The following are some factors that one should consider while deciding construction materials:
- Cost. When looking for various construction materials, one will realize that the rate varies extensively. …
- Climate. …
- Durability. …
- Availability. …
- Sustainability. …
- Maintenance. …
- Aesthetic Appeal. …
- Performance.
How do you construct a foundation on a slope?
How Do You Build on a Sloped Lot?
- There are two ways to build a house on a sloped lot: using the “cut and fill” method, or making use of stilts.
- Cut and fill refers to the process of leveling out the ground for the foundation by adding soil, removing it, or both.
How do you site a home?
10 Tips for Siting Your House
- Setbacks. The first consideration is the “buildable envelope.” Many local codes specify that a house should be a minimum number of feet from each of the lot lines and any body of water. …
- Neighborhood fit. …
- Views from inside. …
- Solar orientation. …
- Wind. …
- Landscape Elements. …
- Slope. …
- Hills.
What are the three things to think about when selecting the proper material?
Three Important Considerations
- Fabrication and Material Costs.
- Expertise Required.
- Transportation and Delivery of the Fabricated Vessel.
What are the three factors to be considered when choosing the right materials?
The Importance of Choosing the Right Materials
- Function – what we need this product to do.
- Durability – the product should stand the test of time.
- Aesthetics – the fine balance between appearance, durability and cost.
- Consistency of performance – the product should record a low failure rate in testing.
How do you build an uneven ground foundation?
Quote from the video:
Quote from Youtube video: So place pillar in the middle and you will create as low snap point for the foundation. So as you will see this foundation is a little bit lower than. This one.
How do you pour a concrete pad on unlevel ground?
Mark off the area as usual and then dig it out to the required depth. The depth depends on what type of concrete you’re using and whether it needs a gravel base. You’ll need to dig out more on the higher side to make it level with the lower side. Smooth out the ground and then check the level in all directions.
How do you select materials?
Start with a Bill of Materials (BOM) to know how many materials your product will use. Identify the material requirements including performance, aesthetics and cost. Prototype and test using different materials and manufacturing techniques. Evaluate the results and find the materials that satisfy the product’s needs.
What are the two major factors in selecting the materials *?
It is important to consult experts when choosing building materials. I would recommend to use materials that is cost-efficient and at the same time durable.
Durability
- Aesthetics.
- Durability.
- Availability.
- Installation method.
- Performance and.
- Maintenance.
What are the factors considered in materials handling that causes problems?
Factors Affecting the Selection of Material Handling equipment
- PROPERTIES OF THE MATERIAL. …
- LAYOUT AND CHARACTERISTICS OF THE BUILDING. …
- PRODUCTION FLOW. …
- COST CONSIDERATIONS. …
- NATURE OF OPERATIONS. …
- ENGINEERING FACTORS. …
- EQUIPMENT RELIABILITY.
What are the factors which should be taken into account while selecting a material for any engineering application?
Factors affecting the selection of materials:
- (i) Component shape:
- (ii) Dimensional tolerance:
- (iii) Mechanical properties:
- (iv) Fabrication (Manufacturing) requirements:
What factors affect material selection other than design?
What other factors affect material selection other than design? Product quality , Cost of the material and transportation or freight costs, relation to the stock markets and supply and demand formula, material durability and availability of spare parts .
What are the four 4 basic steps in material selection process?
Materials selection process
- Identify the design requirements.
- Identify the materials selection criteria.
- Identify candidate materials.
- Evaluate candidate materials.
- Select materials.
What is the Ashby method?
An Ashby plot, named for Michael Ashby of Cambridge University, is a scatter plot which displays two or more properties of many materials or classes of materials. These plots are useful to compare the ratio between different properties.
What should be your five point criteria for deciding the type of material to be used for a particular manufacturing process?
Here is a list of the categories of the requirements to consider when selecting a material for a component or a joint between components:
- Performance requirements.
- Reliability requirements.
- Size, shape, and mass requirements.
- Cost requirements.
- Manufacturing requirements.
- Industry standards.
- Government regulations.
