Why is my washer stuck on the rinse cycle?

If the drain control is broken or the drain is clogged, the washing water won’t be able to escape and the washing machine will stall trying to start the rinse cycle. You may be able to clean and readjust your drain control components, or you may have to replace them entirely so they can start functioning again.

Why does my GE washer skip the rinse cycle?





Your washer uses a switch or a control board to change wash functions. A malfunctioning switch or control board can make your washer not rinse at all. A bad switch or control board can also stop your washer right before the rinse cycle begins. Check the function switch with a meter to see if it is causing the issue.

What does load sense mean on GE washer?

We offer the Precise Fill (may also be called Auto Load Sensing or Adaptive Fill) feature on Top Load washers with an agitator or an infusor. The Precise Fill feature allows the washer to determine the optimum water required to wash the items in the washer basket.

How do you start a GE washer?

The sequence of operation is:

  1. Load clothes.
  2. Load detergent and other laundry products that you may need.
  3. Press the Power button. …
  4. Select the cycle. …
  5. Press Start.
  6. For 15 seconds, the unit’s computer checks the system and then locks the door.
  7. The basket turns 1/4-turn clockwise, then counter-clockwise and unlocks the door.

How do you troubleshoot and repair an LG washer that stops at the rinse spin cycle?

Draining problems in LG washers stem from clogged drain filters.



Unclog the drain filter and your washer will cease to stop at the rinse and spin cycle.

  1. Find the filter door on the bottom left of the appliance. …
  2. Flip open the filter door.
  3. Pull the drain hose out and insert it into a pan or a bucket.

How do I reset my washing machine cycle?





Quote from the video:
Quote from Youtube video: The machine gives you 30 seconds to lift the lid and close. It six times and once you start lifting the lid. You have 12 seconds to do the six repetitions.

How do I reset my GE washer control board?

To reset the electronic controls on your washer, shut off the circuit breaker or fuse to the washer or unplug the washer for 2 minutes. For models that have a timer control knob, turn the knob around and back to any position other than final spin for the interrupted cycle. Then, restore power.

Why won’t my GE washer rinse and spin?

When a load is properly balanced but still won’t spin, there may be an issue that prevents the water from draining from the machine. Make sure the drain hose is properly connected and that there are no kinks or pinched areas. Your washer may not drain and enter the spin cycle if the pump filter is clogged.

How do you remove the wash cycle on a GE washing machine?

Turn the dial cycle on the front of your washing machine to the “0” or “OFF” position that indicates the end of the washing cycle. The appliance will then drain away any water from the washing drum before unlocking the door, letting you make necessary adjustments or add/remove items from the machine.

How do you troubleshoot a GE washing machine?



How to Troubleshoot a GE Top Load Washer

  1. Check the amount of detergent you have put in the washer. …
  2. Examine the GE top load washer’s drain hose for leaks. …
  3. Check the water connections to your GE top load washer. …
  4. Check whether the GE top load washer lid is closing firmly. …
  5. Check the load in your GE top loading washer.

Why won’t my GE washer drain?

A kink or clog in your washing machine’s drain hose could be interfering with water flow and preventing your machine from draining properly. To inspect the drain hose, turn off the power to the washer, disconnect the hose (have a bucket ready to catch any water), and check the hose for damage or obstructions.

What is deep rinse on GE washer?

Deep Rinse – Ensure clothes are thoroughly rinsed free of detergent, fabric softener and other additives. 2nd Rinse – Ensure removal of detergent, bleach and other additives with an optional extra rinse after the wash cycle.

How do I force my LG washer to drain?



If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.

Why is my LG washer stuck on spin cycle?

Some common reasons for the cycle being delaying during the spin cycle are slow draining or unbalanced loads. It is important that the drain filter is clean and free of obstruction. Also, the drain hose should not be kinked and installed properly.

How do I reset my LG washer?

A washing machine is reset by pressing power off/on button on the control panel & disconnecting it from power board for a few minutes. Reconnect and switch on again. it can be completely cleared with all of the settings renewed.

Does my LG washer have a reset button?

What does resetting a washing machine do? LG washing machines like most other machines in recent times come with a reset button. This feature allows you to restart the washer if there is an error code flashing in the digital display in the control panel.

How do I put my LG washer in diagnostic mode?



Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer.

How do I unlock my LG washing machine?

Quote from the video:
Quote from Youtube video: This will also allow the door to unlock if. The water in the tub is too hot for the washer to unlock the door simply wait for the washer to cool down door will unlock.

How do you manually drain an automatic washing machine?

If not, follow these steps:

  1. Step 1: Turn off the power and lay down towels.
  2. Step 2: Locate the drain hose at the back of the washing machine.
  3. Step 3: Drain the water.
  4. Step 1: Turn off the power and lay down towels.
  5. Step 2: Locate the drain hose.
  6. Step 3: Drain the water.
  7. Step 4: Scrub the filter.


How can I unlock my washing machine?



Turning off the machine at the mains should allow the door lock to cool down, and after a few minutes, you’ll be able to open the washing machine door. The interlocks can take some time to release at the end of the cycle, so be patient. The most common cause is water left in the machine. Try running a spin/drain cycle.