How do you connect two drain hoses together?
Quote from the video:
Quote from Youtube video: Next install the extension hose with adapters between the original hose. And drain then tighten clamps reinstall drain hose with the extension. Into the home's drain.
Can I connect two washing machine waste hoses together?
you can join two off each together useing a 3/4 connector. or make the copper feed pipes longer & waste pipe.
How do you secure a drain hose to a standpipe?
Quote from the video:
Quote from Youtube video: Make sure that the drain hose extends no more than eight inches into the drain pipe or standpipe.
Can a washing machine drain into 1 1 2 pipe?
Drain and Trap Requirements
A 2-inch drain pipe is required for all washing machines. The former requirement of 1 1/2-inch pipe is not enough to handle the fast drainage of modern washers.
Can you join a drain hose?
You can buy supply hoses in lengths up to 96 inches, which you can attach to your existing hoses with 3/4-inch hose thread connectors. Lengthening the drain hose isn’t difficult, because you can buy a drain hose extension that simply clamps onto the end of your existing hose.
Can you connect 2 expandable hoses together?
Connecting two expandable hoses is possible and can be as easy as screwing together two opposing ends of two hoses. However, if you’re working with two different diameters of hoses or two ends of the same style (male/male or female/female), you’ll have to use a couple of tools.
Why does my washer have two drain hoses?
What is the purpose of two drain connections? LAW is a water saver, can drain the soapy water into a tub and th esecond hose drains the rince water down the drain…the soapy water can be drain back into the machine to be used a second time.
Can you extend washing machine pipe?
Washing machine waste pipe extensions are used to replace or extend an appliance drain hose, which connects to a washing machine or dishwasher to empty the used water to a standpipe or u bend.
How far can I extend my washing machine drain hose?
For new Top Load washers, the drain hose should be no more than 5″ down into the drain pipe. For Front Load washers, the drain hose should be no more than 7″ down into the drain pipe.
Can a washer and toilet share the same drain?
Some buildings have multiple waste lines that are connected to different appliances. However, if you’ve already taken note of the fact that your toilet gurgles whenever the washer drains, they’re definitely using the same system. That means that they also share the same vent stack.
Can a washer and shower share the same drain?
You can tie in a shower and tub drain to your washing machine drain as long as there is a vented pipe tied into the drain to keep the flow moving along fluidly.
What is code for washer drain pipe?
2 inches
According to the Universal Plumbing Code, the standard for washing machine drain size is 2 inches. The P-trap should be between 6 and 18 inches high from the floor, while the pipe should be between 18 and 30 inches high from the floor. These standpipes connect to the home sewage system and should also be vented.
Does a washer drain need an air gap?
It is important to have a sizable air gap between the end of the drain hose, and the bottom of the sink. An air gap prevents backwater from ever getting sicked back into your washing machine.
Does a washing machine drain need a P trap?
If your washing machine drains to a sewer line, such as a city sewer system or a septic tank, it must have a P-trap. A P-trap contains water in its bend. This water is an essential vapor barrier that prevents sewer gas from coming up through the drain line and entering your home.
Does a washing machine drain hose need to be elevated?
Yes, the drain hose needs to be elevated and it’s always best to do so at a level that’s higher than the washing machine itself. This will prevent possible siphoning. There are also other steps you can take to ensure that you get the best drainage.
How do you position a washing machine drain hose?
Reach around to the back of the washer with the measuring tape or yard stick. Leave the machine in its current position. Measure the maximum height of the discharge hose, at the arch, from the floor where it terminates into the standpipe in the floor, nearby laundry sink or recessed drain in the wall.
Can a washing machine drain be too high?
Most washing machines require a standpipe with a height of at least 36 inches. Check your manual to find out the requirements for your particular unit, and ensure your standpipe meets this minimum requirement. Placing your standpipe too low or too high can cause backflow and overflow.
Why does a washing machine need a standpipe?
A laundry standpipe connects a washing machine’s drain hose to a home’s waste stack. While it might be tempting to simply connect your washer to any other convenient drain line, doing so increases the risk of water overflow and sewer fumes.
How do I extend my washer standpipe?
That isn’t difficult either — remove the ring entirely, wrap some rope packing around the pipe just above the junction (or install a new packing washer, depending on the age of the hardware), slip the ring back over the tube and tighten it onto the threads; doing so compresses the packing and makes the joint …
Should I seal the washing machine drain hose to the standpipe?
While sealing around the discharge hose will prevent gases from escaping the standpipe, it doesn’t allow the necessary airflow into the standpipe during the draining process. This results in overflowing and possible flooding of the home and/or the siphoning of water from the washing machine.
