How do you connect plastic tubing to refrigerator?

Quote from the video:
Quote from Youtube video: So that they're very tight on both sides. So you need to make sure that you got your refrigerator pulled out straight so you could slide it straight back in when you're done.

How to Connect ice maker water line to PVC?





Quote from the video:
Quote from Youtube video: So you put you insert this sleeve into the line first off you've got a compression nut. Our compression sleeve and then a compression nut.

Can I use plastic tubing for ice maker?

Answer: You’re right to be concerned, because plastic tubing to an ice maker is susceptible to cracking and splitting. The constant flow of hot air from the compressor fan in the essentially unventilated space behind the fridge blows over and around the tubing — and eventually makes it quite brittle.

How do you plumb a fridge?

Quote from the video:
Quote from Youtube video: It's going to put this little pointer. Right through your pipe. Now. They say don't you don't even have to turn the water off as a precaution I always turn the water off right there's no point.

How do you connect plastic tubing together?

Quote from the video:
Quote from Youtube video: Slide the olive on push it all the way inside your joint. Then size them the nuts or thin good size. Now all you need to do is nip it.

How do you connect plastic tubing?





Quote from the video:
Quote from Youtube video: Let's put cement on the fitting and the PVC pipe and inside of both ends of the coupler. I'm going to put the coupler on the pipe. First little quarter turn for a good seal.

How do you splice a refrigerator water line?

Quote from the video:
Quote from Youtube video: It comes in a little plastic container like this quick connect it says coupling okay and this is quarter-inch. And this is quarter-inch OD meaning outside diameter.

Can you use a saddle valve on plastic pipe?

Most saddle valves are designed to work with standard rigid copper pipes—they are not recommended for PVC, CPVC, or PEX plastic pipe. They are also designed for water systems with a maximum pressure of no more than 125 psi.

How do you tap a PVC water line?

Quote from the video:
Quote from Youtube video: The next thing I'm going to do is using the hacksaw. Make two cuts one here. And another one about an inch. Over. Measure about one inch from the end and you're going to cut this off right over.

What size is fridge water line?



1/4-inch

The tubing should have a diameter of 1/4-inch and can be copper line, braided steel line or plastic tubing. Many professionals prefer copper line, but plastic tubing is commonly sold as part of ice maker installation kits.

How much does it cost to install a waterline for refrigerator?

Refrigerator Water Line Installation Cost



The price to install a water line ranges from $70 to $130. However, if your new fridge doesn’t have an ice maker or water dispenser, you can skip this step. You also won’t need a water line if the model you’re replacing already had an ice and water dispenser.

Can you use a fridge without connecting the water line?



If your fridge does not have a water/ice dispenser or don’t plan to use it, you won’t need a water line. You can also find refrigerators that dispense water from a tank, and similarly, require no plumbing. However, if you want a standard, plumbed ice maker, then, yes, your refrigerator will need a water line.

How do you expand plastic tubing?

Quote from the video:
Quote from Youtube video: Water take a ream. And expand out the plastic. Just a little bit like that you can also take a propane torch and just kind of heat that plastic up and continue to push that plastic until it expands.

How do you expand PVC pipe?

Quote from the video:
Quote from Youtube video: And should only take two or three minutes to do this don't keep the heat gun in one spot. Keep moving it around. Every so often you can check it. Give it a squeeze.

How do you connect different size PVC pipes?

Glue a coupler to the larger pipe using PVC cement. Spread cement on the outside of the bushing and the inside of the coupler and slide it all the way into the coupler. Spread glue on the inside of the opening and the outside of the smaller pipe, then slide the smaller pipe into the opening.

How do you connect different size tubing?



Quote from the video:
Quote from Youtube video: This is a perma lock tubing T adapter. Two sides of the fitting can be attached to one-half inch poly tubing and the third side can be attached to three-quarter inch poly tubing.

How do you join two different size pipes?

One inexpensive method of connecting ABS to PVC drainpipes is to use male and female fittings. Apply pipe thread tape before screwing them together, and then glue the pipes into the fittings using the proper cement. Arrange the fittings so the water flows past the threads on the male fitting, not into them.

How do you connect PVC pipe to small pipe?

Quote from the video:
Quote from Youtube video: And just push that on there like. So if you leave that for a few seconds. You will soon find that it's virtually impossible. To move and it's completely sealed.

How do you connect PVC to PVC pipe?

Quote from the video:
Quote from Youtube video: When connecting make sure to push and twist the pipe together. And then hold for about five seconds the same applies when connecting a fitting to a fitting primer.

How do you connect PVC pipes without threads?



Quote from the video:
Quote from Youtube video: So you've actually got to work pretty quickly put the glue on both sides. Press it and leave it and it's stuck. Then you do exactly the same on the other side.