Gunite (Concrete) Pool Removal Step by Step Process

  1. Acquire the necessary permits from the local municipality governing the area where the pool is to be removed.
  2. Call Miss Utility as per the local laws. …
  3. Determine egress into the property.
  4. Lay protection for the lawns by using Track Protection Devices.

How do you remove a built in swimming pool?


  1. Draining the pool of any remaining water.
  2. Drilling holes in the bottom of the pool for additional drainage.
  3. Demolishing the top layer of the pool.
  4. Backfilling the pool with rubble—usually gravel and soil.
  5. Adding and compacting topsoil.

How much does it cost to remove concrete from a pool?

In general, the cost can range from $5,000 to $15,000 and up if you want to completely remove your concrete pool from the ground. If you just want to fill in your concrete swimming pool, it can cost between $3,500 and $5,000 on average.

How much does it cost to fill a pool?

between $9,000 and $19,000

A full pool fill-in (or removal) costs twice as much (or more) than a partial pool fill-in; you can expect it to run somewhere between $9,000 and $19,000. Every piece of the pool is demolished and hauled off, and workers fill the empty hole with dirt and gravel.

Can you remove an inground pool yourself?

When it comes to DIY pool removal, many times, homeowners don’t have the proper tools and equipment to get the job done. The solution to this is renting the tools and equipment to get the job done, but if you aren’t used to using the heavy-duty equipment needed, you put yourself at risk for major accidents.

How do you get rid of an inground concrete pool?

Inground pool removal typically involves draining the pool, drilling holes in the bottom, demolishing the top, and filling the pool with the rubble and additional dirt soil.

Removing an Above Ground Pool

  1. Drain the pool. …
  2. Tear it down. …
  3. Haul it away. …
  4. Repair the site.

Can you fill a pool with dirt?

Filling your pool with dirt is the fastest and most affordable way to get rid of a pool because there’s no need to remove your concrete or metal shell. This saves on both labor and hauling costs. However, filling a pool with dirt is still a delicate process that requires careful preparation, drainage, and demolition.

What type of pool is gunite?

Gunite pools use a rebar framework that is sprayed over with a concrete and sand mixture. Gunite is exceedingly durable, so swimming pools made of this substance are built to last. The versatility of gunite swimming pools means more than the ability to create an unlimited array of shapes.

Can you resurface concrete around a pool?

Concrete pool deck resurfacing can spice up your old pool deck without the hassle of tearing out the old concrete and pouring new. Pool deck resurfacing is a process that either repairs damaged concrete surfaces or updates their look.

Is it hard to get rid of a pool?

Whatever the reason, removal or repurposing on an inground pool can be challenging, expensive or even dangerous. For those considering getting rid of an inground pool, research is key, but the results can be well-worth the effort.

Can you build a deck over a pool?

The answer is, it’s a deck built in the true style that decks are normally built. Instead of building it out the back door, it covers the pool, usually flush with the surrounding surface. Decks are not very common in the valley of Phoenix, because of the style of homes that we build.

How do you close a swimming pool permanently?

Quote from the video:
Quote from Youtube video: Work. And if you want to close your pool for a long period of time you might be thinking well i might just drain it down or drain the water all together well the pool.

What happens if you don’t open inground pool?

A pool isn’t designed to be stagnant during the warm months of the year, and pool covers deteriorate faster in strong summer sunlight. Leaving the pool closed all summer is a guaranteed way to end up with a green, smelly mess and permanent stains or damage to the pool surfaces.

What is the cheapest way to fill a pool with water?

What is the cheapest way to fill my pool? While it may not be the fastest way, using a garden hose and city tap water is the cheapest way to fill your swimming pool. The average American family uses 12,000 gallons of water per month. And the average-sized swimming pool is around 15,000 gallons.

How do you clean a pool that has been sitting for years?

Recovering Pool Water

Adjust the pH levels as well as the water hardness. Use pool shock until the dark green water turns blue-grey. Make sure the filter is running throughout until the water becomes clear. Use a clarifier and flocculant to coagulate and drop particles to the bottom of the pool.

Can you power wash a gunite pool?

Only pools constructed of plaster, exposed aggregate, or concrete are strong enough to withstand the power of a pressure washer. Any other type of pool, such as vinyl or fiberglass, must be cleaned using chemical treatments or using non-abrasive methods.

How do you clean a disgusting pool?

Quote from the video:
Quote from Youtube video: So you want to know how to clean a green pool two steps you need to take add bottle algaecide this is going to kill all the algae. It's going to turn it white make it real cloudy in the pool.

How long can you leave a pool empty?

How long can you leave a pool empty? Well, the minimum amount of time possible in order to minimize the risk of serious damage. Most issues that require a pool drain will take at least a day or two to resolve, but it’s recommended to not let it sit empty for any extended period of time.

Can you leave a gunite pool empty?

Your in-ground gunite pool is designed to hold water. The pressure of the thousands of gallons in the pool’s bowl helps the gunite hold its shape and anchors it in the ground. When you remove the water from a gunite pool and leave it empty, you run a significant risk of damaging your pool.

Will an inground pool collapse without water?

Most inground fiberglass and concrete pools are built structurally to withstand the weight of the dirt against them when drained. However, if the groundwater is high enough, it can push the entire pool out of the ground. The pool shell acts like a ship and floats up in the groundwater.