How do you remove a shower drain grate?

Quote from the video:
Quote from Youtube video: One get yourself some wd-40 spray it around the rim of the drain. Let it sit for about 15 minutes or so and then get yourself some pliers that fit into these holes in the drain.

How do you remove a plastic shower drain grate?

Hold the stopper body in place and unscrew the top knob (counterclockwise) with pliers and a rag or rubber grippy to prevent scratching. Unscrew the brass insert beneath with a flathead, then lift the stopper. From the open position, lift and look for a set screw. If no screw, simply turn counterclockwise to remove.

How do you remove a shower drain cover plate?

Quote from the video:
Quote from Youtube video: But basically this drain has to be up. And use the channel locks players in the bottom part of it. And then vice grips on the top. Put this guy on and hold the bottom tight with the pliers. And then

How do you replace a shower drain cover?

Quote from the video:
Quote from Youtube video: Once I get the screws removed I will pop the cover off the drain. Then I will take the new drain cover line the holes up in the drain cover with the holes in the outlet.

How do you remove a shower drain cover that has no screws?

Open: Press the drain, so it’s in the open position. Twist: Remove the lid of the drain cover by twisting it off. Unscrew: Use your flathead screwdriver to unscrew the base of the drain cover. Lift: Now lift the drain cover off completely.

How do you remove a bathtub drain grate?

Unscrew the knob on the top of the drain stopper to see if there is a set-screw underneath. If your drain stopper has a set-screw, use a small screwdriver or a hex key to unscrew it. Twist the entire stopper counterclockwise until it pulls free from its mounting post. Remove the mounting post using pliers.

How do you remove floor drain grates?

Alternatively, use a metal coat hanger or other strong material to loop around the holes in the drain cover, then pull, or use the hook end of a hammer to pry the cover loose. Often, repeating these methods with the addition of lubricant and rust remover will eventually loosen the cover.

How do you take apart a shower drain?

Insert 2 nose pliers into the drain openings and grip the plier handles firmly, then twist them both to the left to begin loosening the drain. Continue twisting the drain until it is completely loosened, then lift the drain out of its place.

How do you remove a shower drain from a tile floor?

  1. Clear all of the grout around the drain. You can use a Dremel tool or a grout saw. …
  2. Pry the tiles up. Be careful because you do not want to break them. …
  3. Clean the drainpipe. …
  4. Replace the tiles. …
  5. Grout all of the gaps except the part around the drain. …
  6. Seal the new drain with silicone.