Blog / How to Paint Spindles
- Step one: Clean your surfaces. Prior to painting, take the time to clean your surfaces. …
- Step two: Prep your space. …
- Step three: Stabilize your deck railings. …
- Step four: Paint your spindles. …
- Step five: Paint your remaining surfaces and let dry. …
- Trimaco has your spindles covered.
Is there an easy way to paint spindles?
Quote from the video:
Quote from Youtube video: Here. And i am going to use the sock to paint the spindle. It is literally that easy i am going to rub my hand around and you can see how quickly and easily i'm already painting.
Do you need to sand spindles before painting?
Even if you have kids that like to grab onto the spindles you still don’t need to sand them in my opinion. So sand just the tops of the handrails, just enough to rough them up a bit and scratch the surface, don’t worry about sanding underneath and in between each spindle… again too much work.
How do you prepare stair spindles for painting?
How to paint stair spindles
- Protect the area. Put down your dust sheet to protect the staircase and surrounding area. …
- Prep and sand the spindles. Use sugar soap and a clean cloth or flat scouring pad to clean the spindles. …
- Prime the spindles. …
- Paint the spindles.
What is the best paint to use on spindles?
The most common coating used for spindles is acrylic paint, in which case a small airless sprayer would work great, but you need to be a little more careful with the masking to make sure the surrounding area is well protected from hovering over-spray.
How do you paint stair spindles without removing them?
How To Paint Stair Spindles Without Removing Them?
- Clean the spindles and remove all dirt.
- Sand the spindles (manually or with a sander).
- Prime the spindles.
- Sand the spindles (again).
- Apply the second coat of primer.
- Paint the spindles.
- Paint the banister (optional).
- Apply a topcoat (optional).
How do you paint spindles without drips?
Quote from the video:
Quote from Youtube video: So i i don't want to load my brush fully you want it fairly dry you can start off it's better to start off with it more dry than too wet because the wet will make a mess.
What is the best way to sand spindles?
The proper way to sand spindles is with two grades of sandpaper — from heavy to light.
- Fold a sheet of 100-grit sandpaper three times. …
- Revolve the spindle back and forth, twisting it while you encircle it with the sandpaper. …
- Slide the cylinder of sandpaper down or up the spindle, overlapping the first area by 1 inch.
Should I paint spindles white?
Paint Stair Spindles
Paint the banister black and the spindles white for a truly classic look that never goes out of style. Or, you can paint the spindles the same color as your banister, handrails and trim for a uniform look.
Can you paint spindles with a sponge?
Dip the sponge into the paint on one side as you will see in the video and apply to the piece you’re painting. For areas like spindles the sponge folds to wrap around each spindle coating it evenly with paint.
How do you paint wood spindles?
Blog / How to Paint Spindles
- Step one: Clean your surfaces. Prior to painting, take the time to clean your surfaces. …
- Step two: Prep your space. …
- Step three: Stabilize your deck railings. …
- Step four: Paint your spindles. …
- Step five: Paint your remaining surfaces and let dry.
Can you paint a banister without sanding?
This video tutorial demonstrates how to stain a banister without sanding or stripping using General Finishes Gel Stain and paint with water based primer and paint. This project is time consuming, but definitely doable for anyone who likes to paint.
How do you remove paint from stair spindles?
Use a chemical paint stripper. This is what we did and I used a combination of Paint Panther and Kling Strip to remove the paint, with the bulk of it being removed using Kling Strip.
How do you paint deck spindles fast?
Quote from the video:
Quote from Youtube video: And you'll catch a little bit of the brush on the spindles. You see a little paint buildup right there just lightly even that out a little bit so you avoid any drips. Bottom side first then.
Can you paint spindles with a roller?
Use your roller to paint it one half at a time. Make sure the coat of paint is as consistent as it can be. Clean up any drips or splatters, let the paint dry, then recoat the spindle if needed. Usually, 2 coats is enough, but add a third coating if the finish looks uneven.
How do you paint spindles before fitting?
Quote from the video:
Quote from Youtube video: You can keep your fingers out of the wet finish by holding onto the screws. As you paint and the best part is you can paint all four sides of the spindles. At once.
Can you paint spindles with a sock?
It basically involves putting on a plastic glove (you can get them from B&Q), and then wearing an old sock over it, and then using your hand as your ‘brush’. You dip your whole sock-wearing hand straight into a tin of paint and rub your hand up and down the area you’re painting. No paintbrushes needed.
Can you paint spindles with a sponge?
Dip the sponge into the paint on one side as you will see in the video and apply to the piece you’re painting. For areas like spindles the sponge folds to wrap around each spindle coating it evenly with paint.
How do you sand stairs spindles?
The proper way to sand spindles is with two grades of sandpaper — from heavy to light.
- Fold a sheet of 100-grit sandpaper three times. …
- Revolve the spindle back and forth, twisting it while you encircle it with the sandpaper. …
- Slide the cylinder of sandpaper down or up the spindle, overlapping the first area by 1 inch.
How do you paint Bannister spindles with a sock?
All you need is a protective glove, a sock, and paint. First, cover your hand with the protective glove and place the sock over that glove. Then, dip the sock in the paint and with your hand gripped around the spindle, massage the paint all over the surface. In seconds, you’ll have a perfectly painted spindle.
How do you paint over stained spindles?
Now you can’t use just any primer when painting on top of previously stained wood! You will need a thick stain blocking primer. A thick stain blocking primer is necessary to painting a stained railing to make make sure the previous stain doesn’t bleed through the paint.
How do you remove paint from stair rails?
- Place drop cloths on the floor under the banister. …
- Paint a paste or gel paint stripper onto the banister with a paint brush. …
- Let the stripper sit on the banister for the time directed on the container. …
- Scrape the stripper and the old paint away from the wood with a putty knife.
How do you paint with socks?
Quote from the video:
Quote from Youtube video: But for me it's just much faster to just start everything off with a stamp. I'm just putting a very thin layer of fabric paint on my stamp. This is just kind of outline.
Can you spray paint socks?
If you’ve been wanting to play with dye but don’t want to mess with the vats and buckets and dipping and dunking, spray dye is a fun and accessible way to spice things up with a little colour. Test and try and keep playing and you’ll end up with a pair of socks you love that you made look that awesome!
How do you paint skirting boards with carpet down?
Vacuum your carpet and your skirting board to remove any dust and debris. Clean your skirting board with a weak soap solution and wait for it to dry thoroughly before moving onto the next step. Applying low tack, wide set masking tape along the edge the carpet overhanging the skirting board slightly.
