How do you replace a soldered water shut off valve?
Quote from the video:
Quote from Youtube video: Simply heat the fitting. And half pliers ready to pull it off when the solder is at melting temperature by wiggling side to side with the pliers it will easily come off.
How do you install a push connect valve?
Quote from the video:
Quote from Youtube video: So mark the tube one inch from the end slide the flange over the tube and push against the wall. Now push the valve onto the tube until the valve reaches the mark. And you feel resistance.
Can you replace a sweat valve with a compression valve?
If you’re replacing a sweat valve with a compression valve, sand off all traces of solder before adding the new escutcheon, nut and sleeve. Otherwise, remove enough old solder to allow the new sweat valve to slide onto the tubing.
How do you replace a threaded shut off valve?
Quote from the video:
Quote from Youtube video: I'm going to place the arc pipe wrench on that back nut right here and I'm going to turn. So here we go. Now I'm just gonna do it by hand here. There we go okay so there's my pipe there it's threaded.
How do you remove a soldered ball valve?
Quote from the video:
Quote from Youtube video: Hot enough to melt the solder before the flux burns away if the flux burns away then the pipe will oxidize. And the solder won't get hot enough to melt. So that you can remove the fitting.
What’s better compression fittings VS soldering?
Compression fittings are not nearly as robust as soldered fittings making them much more sensitive to powerful stresses. They are not ideal for applications where they could be potentially exposed to lots of flexing, bending and excessive vibration or tube movement.
How do you install a push to connect valve on a copper pipe?
Quote from the video:
Quote from Youtube video: If you're handling copper pipe remove any sharp edges or burrs on the pipe. Next. Use your sharkbite depth and D bar tool to measure and Mark the insertion depth on your pipe.
Are push to connect fittings reliable?
And they are more practical than permanent solvent-gluing CPVC and PVC pipes or sweat-soldering brass pipes with a torch in general plumbing applications. These fittings have proven to provide highly reliable connections even when they are hidden behind panels or other enclosed areas.
Are quick connect fittings reliable?
John Guest quick-connect and SharkBite fittings are both reliable and awesome fittings for emergency fixes. Even though Quick-Connect and SharkBite fittings are rated for use underground and behind walls, soldering pipes may be the smarter choice.
How do you remove a soldered fitting?
Quote from the video:
Quote from Youtube video: So start eating the fitting. And use a pair of adjustable pliers to wiggle it off a little tip here is to remove your pliers from the fitting as you're heating they'll absorb the heat.
How do I remove a push to connect valve?
Quote from the video:
Quote from Youtube video: Just use a wrench. This is a 3/4 inch line 13/16 wrench just push it on here this is really chewed up but it'll go on the other end too just going to give it a good push on.
How do you take soldered pipes apart?
Quote from the video:
Quote from Youtube video: Process is very straightforward because we use heat to melt the solder. Once the solders molten it releases its grip.
Can you reuse a soldered fitting?
Copper pipes are usually connected together using a variety of fittings, including elbows, T’s and couplings. You can remove copper fittings and reuse them by following a straightforward procedure that requires a moderate amount of time and effort.
Do you have to remove old solder from copper pipe?
Removing a solder from a copper pipe might sound like an easy task, it is still important to replace the old joint with a new one to ensure it keeps working properly.
Can you Resolder copper fittings?
Soldering vertical copper pipe shouldn’t be too different from working horizontally. If the joint and tip are hot enough, the solder should flow right in. Heat the middle of the fitting and apply the solder as soon as it starts to melt. Remove the heat once the solder starts moving.
Can you Resweat copper fittings?
Quote from the video:
Quote from Youtube video: So put your new fitting. On and then we just need to solder just a brief guide on how to solder this pipe we're going to heat it from the bottom okay heat the joint up from the bottom.
