How do I replace the cartridge in my Kohler bathroom faucet?
Quote from the video:
Quote from Youtube video: And the handle on this particular faucet is actually part of this assembly. So this all comes off together. So what i have to do is i have to turn this counterclockwise to unscrew it.
How do you replace a widespread faucet cartridge?
Quote from the video:
Quote from Youtube video: Insert the new cartridge into the body and rotate gently to ensure it's properly seated reapply the retainer nut and then tighten with your pliers.
How do you remove a Kohler faucet cartridge?
Quote from the video:
Quote from Youtube video: The handle from the faucet. Turn the bonnet counterclockwise to remove it from the faucet. Body. Using an adjustable wrench remove the mounting nut remove and discard the old valve.
How do you remove a Devonshire faucet handle?
Widespread Faucet Handle Removal:
- Hold the handle with one hand. Using your other hand, turn the skirt, the decorative flared piece below the handle, counterclockwise. …
- Remove any remaining components to expose the valve. …
- The valve can now be replaced or other repairs made.
- Reassemble handle parts in reverse order.
How do you remove the valve from a Kohler faucet?
Quote from the video:
Quote from Youtube video: Now remove the hex nut and unthread remove the valve body and pull up through the faucet hole grab.
How do you remove bathroom sink cartridge?
Quote from the video:
Quote from Youtube video: It using an allen wrench. Then lift it off twist the bonnet nut counterclockwise to remove it lift out the cam. Then the packing and ball valve remove the seats and springs using a small screwdriver.
How do I remove a stuck Kohler cartridge?
Quote from the video:
Quote from Youtube video: So you want to get some CLR just like I did there spray the CLR. All over the top where the cartridge threads down into the valve body. Let that set up for a few minutes tap on it a little bit.
How do I know what cartridge fits my faucet?
Use a caliper or ruler and measure the cartridge. Do this by measuring from the base to the tip (from seat to splines). Pay attention to the length tier of your cartridge (Lengths range from 1–12).
How do I know what cartridge my faucet is?
Quote from the video:
Quote from Youtube video: The splines hold the handle in place so that when you turn the handle on the stem is opened each manufacturer uses the same number of splines on each of their stems.
How do you remove an old widespread bathroom faucet?
Quote from the video:
Quote from Youtube video: And squeeze the sides and it should just slide right off that coupling on all three spots but didn't know that because I never did it before.
How do you take apart a Kohler single handle faucet?
Replace the Valve in a Single Handle Faucet
- Turn off the water to the faucet.
- Remove the plug button from the handle (Fig. …
- Loosen the screw underneath the plug button to remove the handle (Fig. …
- Unscrew the bonnet counterclockwise to expose the valve and the mounting nut; the bonnet should remove easily by hand (Fig.
How do you remove a Kohler faucet handle without screws?
Locate & Remove The Button Or Cap
See if you can locate one on the top or side of the handle. If you find one, you can use a flathead screwdriver to remove it. Simply work it into the gap around the button or cap and work it around the button or cap, gently lifting as you go.
How do you remove the handle on a Kohler bathroom faucet?
To remove the handles for the Forte widespread bathroom or bidet faucet, refer to the following directions.
- Hold the handle with one hand. …
- Remove any remaining components to expose the valve. …
- The valve can now be replaced or other repairs made.
- Reassemble handle parts in reverse order.
How do you remove the cartridge from a faucet?
You’ll likely need to remove a bonnet nut or retaining nut. Unscrew the nut with an adjustable wrench. The plastic cylinder with a stem on top is the faucet cartridge.
Remove the Handles
- Use a screwdriver to remove each screw. …
- Set the screw aside. …
- Carefully pull straight up on the handle. …
- Repeat for the other handle.
How do you remove a bathroom sink lever style faucet handle with no screws or caps?
Removing Faucet Handle without Screw: Steps for 3 Different Style
- Step 1: Locate the Cap or Button. Locate the cap or button around the faucet handle. …
- Step 2: Use a Flat Screwdriver to Pop out the Button or Cap. …
- Step 3: Turn Off the Water Supply. …
- Step 4: Remove the Hidden Screw. …
- Step 5: Pull the Handle.
How do you remove a plastic faucet handle?
Insert a flat-head screwdriver into the notch to pry the plastic insert out of the handle. Insert the blade of a utility knife in the seam between the insert and the faucet handle, if there is no notch present. Twist the utility knife handle up and down to pry the insert off.