Connect the supply wires to the remote receiver: black to black, white to white. Connect the grounds together: green (supply) to green (fan), along with a pigtail to the junction box if it’s metal. Cap off the red wire in the ceiling. Remove the red wire from the switch and cap it off.
When installing a ceiling fan what is the red wire for?
A red wire up in the ceiling fan junction box usually indicates that the wiring has been installed which provides separate switch for the light and a separate switch for the fan motor. If your ceiling fan does not have a light fixture, then simply cap off the red wire and attach the fan motor to the black wire.
How do I wire a ceiling fan with black and white wires?
Quote from the video:
Quote from Youtube video: So when you have one black wire coming out of the ceiling. You have to use your switches. Now so we have our ceiling fan switch. And our light switch.
Does blue wire go to red wire on ceiling fan?
Wiring Ceiling Fan and Light with Separate Switches
Connect black fan wire to the black ceiling wire. Connect the blue wire to the red wire. Connect white wires together.
Does the red wire connect to black or white?
Attach the black wire to the outlet you want to always be on (usually the top one) and the red wire to the switched outlet. Connect the white wire to either of the chrome screws (remember, they are still joined) and the ground wire to the green ground screw.
Can you connect the red and black wire together?
These wires are typically used for switch wiring as well as the interconnection between smoke detectors hard-wired into the power system. You can link two red wires together, or you can link a red wire to a black wire. Since red wires conduct current, they are considered hot.
Where does the red wire go?
Red wires are usually used as secondary hot wires. Red wires are also hot and should be clearly marked to avoid the dangers of electrocution. Red wires are commonly used when installing ceiling fans, where the light switch maybe.
Can you connect a red wire to a ground wire?
Trace the red wire through the house/junction boxes and make sure that it eventually connects to a proper ground wire or the ground buss in the main panel. If the bare wire is present and grounded, use it instead of the red wire. If the above conditions are not met, or you can’t trace the wire, hire an electrician.
Can you connect a white wire to a red wire?
In the US, the answer would be no, even though I am reluctant to answer this. White is not aggressive. White is neutral, black is 120, green is ground, and red is the other phase of the mains into your house.
When hooking up a ceiling fan where does the blue wire go?
The blue wire from the ceiling fan gets connected to the second live wire from the ceiling. This second wire can vary in color but is most commonly red or black. This connection allows you to power your lights from the second switch. Connect the white grounded wire from the ceiling to the white wire from the fan.
How do you wire a ceiling fan with 3 wires?
Quote from the video:
Quote from Youtube video: First connect the ground wires. Together. Then the white. Now connect the light kits blue wire to the red wire in the ceiling. And the black wire from the fan to the black wire in the ceiling.
Are blue and red wires the same?
Red wires are hot wires common in a 240-volt outlet or when a wall switch controls the outlet. Blue and yellow wires are hot wires for ceiling fans and three- or four-way switches. White or gray electrical wires are neutral wires.
How do you wire red white and black wires?
Things You’ll Need
Black wires always signify the positive, or hot, leg of the current, while white wires signify negative, also called neutral or return. Ground wires are either left bare or covered with green insulation. When there is an extra hot wire, it is red.
Where do the red black and white wires go on a light switch?
Attach the white wire from the light fixture, which is now the hot wire, to the nut at the top right of the switch. Attach the red wire from the light fixture to the nut at the top left of the switch. Connect the bare copper wire to the green nut at the bottom left of the switch.
Is red or black live or neutral?
US AC power circuit wiring color codes
The protective ground is green or green with yellow stripe. The neutral is white, the hot (live or active) single phase wires are black , and red in the case of a second active. Three-phase lines are red, black, and blue.
Is red wire positive and black negative?
The coloring is as follows: The positive current must be red. The negative current must be black. The ground wire, if present, must be white or grey.
Is the red wire the live wire?
Black (neutral) Red (live) Green and yellow (earth)
How can you tell which wire is hot and which is neutral?
Quote from the video:
Quote from Youtube video: The same applies to US and Canada outlets where the smaller. Slot is for the hot black wire and the larger one is for the neutral white wire. Because sometimes outlets are wired wrong.
What happens if you mix up hot and neutral wires?
This happens when the hot and neutral wires get flipped around at an outlet, or upstream from an outlet. Reversed polarity creates a potential shock hazard, but it’s usually an easy repair. Any $5 electrical tester will alert you to this condition, assuming you have a properly grounded three-prong outlet.
Is red wire a load or line?
The color for the Line wire is usually black and the Load wire is usually red, black, or blue (less common).
