A power surge that trips the AC circuit breaker could be caused by a simple electrical issue within the air conditioner. A loose connection, a failed capacitor, or a short in the wiring could be responsible. Those issues can be fixed easily by a professional.

What causes HVAC breaker trip?

Typically, your AC breaker trips when there’s a short circuit, the AC is overworking or a part is bad or malfunctioning. If you continue to run your AC, you could permanently damage the air conditioner. Get a professional AC repair tech out as soon as you can.

What do I do if my AC keeps tripping the breaker?





Quote from the video:
Quote from Youtube video: It's a pretty good chance that's what it is what you could do is disconnect those same wires from the compressor. Then go reset your breaker.

How do you reset an HVAC breaker?

Quote from the video:
Quote from Youtube video: Within reach of your condenser to reset the breaker use your index finger to flip the breaker to the off position. Which should be the opposite of the current setting. Do this with both breakers.

Can a thermostat trip a breaker?

While there are some reasons why your thermostat may be responsible for tripping your breaker, most of them can come from other parts of your cooling system.

Where is HVAC breaker?

Quote from the video:
Quote from Youtube video: You're going to have one set labeled air conditioner. This is for your outside unit. You're going to have a separate one for your inside unit which for the furnace or air handler.

Which breaker controls HVAC?





To check if this is the case, locate the A/C circuit breaker on your circuit breaker panel; it’s the main power distribution panel that can be located inside or outside of your house. It’s usually marked as “A/C,” “HVAC,” or “air-conditioner”.

How do I know if my AC breaker is tripped?

Quote from the video:
Quote from Youtube video: If they were to be tripped. No in this case there would be a orange indicator in the little window to reset. It you would need to push it down and then back up again to reset a trip to breaker.

Do I need to reset the breaker for my AC to work?

Turning Off & Resetting Your AC Unit in 4 Simple Steps

  1. Shut it Off. First, turn off your AC before resetting the thermostat. …
  2. Get to the Circuit Breaker. So far, so good. …
  3. Wait 30 Seconds. After turning off the circuit breaker linked to the AC unit, wait for a full minute. …
  4. Turn it Back On.


Where is the reset button on my HVAC unit?



Look for it first around on the exterior of your machine, especially along the bottom edge near the ground. An AC’s reset button is typically red and visible, so it should be easy to spot. If you don’t see a reset button on the outside, it could be located inside the unit behind the service panel.

Is it okay to turn off AC circuit breaker?

Yes, you should turn off your AC circuit breaker when it’s not in use, especially during the winter season. By doing so, you can reduce phantom power consumption, thus saving on your electrical bills. Because even though this consumption is barely noticeable, little savings here and there will go a long way.

Is there a breaker on the outside AC unit?

Your air conditioning unit has two breakers; one operates the outside unit while the other operates the inside. If the breakers appear tripped, turn the breakers off and then back on to reset them.