Why does my ice maker keep running water?

If the water pressure is too low, the valve may not close fully when the power is shut off. As a result, the valve leaks water into the ice maker, causing it to overflow. Check the water flow and test the pressure to determine if it is at least 20 psi.

How do you shut the water off to the ice maker?





Once you locate the refrigerator water line shut-off valve, pause. Prior to shutting off the valve, it’s a good idea to turn off the icemaker because otherwise it will continue to cycle on, which can damage the valve. When you’re ready to shut off the valve, simply turn it in a clockwise direction until it stops.

Why does my ice maker not shut off?

Inside every ice maker, there is a plastic paddle that has the sole purpose of discontinuing ice flow once the bin is full. If the feeler paddle is malfunctioning, it will not stop ice production once the bin is full and the ice will then spill out into your freezer.

How does an ice maker know when to shut the water off?

When you change the fridge from water to ice, the switch inside the electrical circuit energizes the solenoid-operated water valve. The solenoid water valve allows water to flow through the valve and into the ice cube trays freely.

How do I test my ice maker water valve?

To check for a mechanical failure of the water valve, it’s easiest to rule out a water supply problem.

  1. Disconnect the water supply line from the water valve.
  2. Place a bucket under the end of the water supply line.
  3. Turn on the water to the supply line and check the flow.




How do you test an icemaker water valve?

Touch one multimeter probe to one terminal and the other probe to the other terminal in order to test the part. Depending on your part, your readings can be from 200 and 500 ohms, or for refrigerators with both a water and ice dispenser, the ohms of resistance might be higher – 500 – 1500 ohms of resistance.

Do you have to shut off ice maker?

You need to leave it plugged in and running all the time if you want ice. If the unit is powered off the ice will melt and the water will return to the reservoir. This is just like your refrigerator or freezer in that it needs to be on all the time.

Do ice makers shut off automatically?

NOTE: Your ice maker has an automatic shutoff. As ice is made, the ice cubes will fill the ice storage bin and the ice cubes will raise the wire shutoff arm to the OFF (arm up) position. Do not force the wire shutoff arm up or down.

How do I turn off my Whirlpool ice maker?



To manually turn “Off” the ice maker, lift the wire shutoff arm.

  1. To turn the ice maker “On”, lift open the ice maker door and lower the wire shutoff arm.
  2. To manually turn “Off” the ice maker, lift the wire shutoff arm.

How do I reset my ice maker?

Turn The Ice Maker Off and On Again



This is a simple matter of resetting the power to your ice maker. By flipping the switch off and back on, you may be able to reset the functionality so that your ice maker begins to dispense ice again.

Where is the reset button on ice maker?

You can find the reset button at the bottom of the ice maker. Remove the ice tray to locate it. Remove the ice tray. The red button you see is the reset button.

Will unplugging my fridge reset the ice maker?

Leave the refrigerator unplugged for 5 minutes. This will allow the ice system to reset. After 5 minutes, replug the refrigerator and turn the switch back on. This should cause the ice maker to start working again.

Is there a reset button on my Whirlpool ice maker?

The reset button is usually located at the bottom of the ice maker unit or in some cases at the top or on the bottom of the ice tray. Once located, press the button down for a few seconds until you hear a beep sound. Once you hear the beep sound, let go of the button.

What is wrong with my Whirlpool ice maker?



Water Supply Issues. In other instances, your a Whirlpool ice maker not making ice may be due to insufficient water supply. A clogged water filter, kinked water line hose, or defective water inlet valve can restrict the water flowing to an ice maker. When this happens, ice production will be limited or completely stop.