What if there is no ground on light fixture?

A plastic box with no ground



You can wrap the wire around one of the screws that holds the fixture on, but the only purpose it serves is to help hold the fixture up while you wire the black hot and white common wires.

Is it OK to install a light fixture without a ground wire?





Strictly speaking, grounding your light fixtures isn’t necessary in all cases. However, it’s a good idea as it makes your light fixture safer and reduces the risk of injury. Metal light fixture boxes should always be grounded where you install the fixture.

What if there is no ground wire in the ceiling?

Quote from the video:
Quote from Youtube video: When you don't have a wire coming in to hook your ground to what you do is you take your ground wire which is either a solid copper or green wire. You'll take that ground wire.

Can you put up a ceiling light without a box?

If you’re wondering how you install a light fixture without an electrical box, the short answer is that you don’t. The electrical box, or junction box, is a code requirement that was established to prevent fires and other electrical accidents.

How do you install a light fixture without the ground?

Quote from the video:
Quote from Youtube video: Around the grounding screw on the fixture strap. And tighten it. Down then tuck your wires into the electrical. Box put your light bulbs in if it has sockets turn on the electric to the circuit.

Can any screw be used as a ground screw?





Ground screws must be -32 thread pitch or finer, and must be threaded into the metal box. 10-32 is the “conventional” size. And most metal boxes have a hole tapped for a #10-32 screw for precisely that purpose. This is visible as a hole slightly smaller than the normal mounting holes.

What happens if you don’t ground a metal box?

Surges in the electricity a box that is not grounded allows the electricity to go where it wants to. This is not a good thing and can cause electrocution or fire.

Will LED lights work without a ground?

Now, any fixture that uses LEDs, or a bulb that uses LEDs to replace an incandescent bulb, must be grounded, similarly to the incandescent-bulb-using fixture. If not grounded, these fixtures use 110/120 volts AC power and might cause injury.

What to do if there is no junction box?

Common examples of electrical devices that require no junction boxes include:

  1. Recessed lights (“can lights”)
  2. Bathroom ventilation fans.
  3. Wall-mounted heaters.
  4. Fluorescent tube-style light fixtures.
  5. Garbage disposers.
  6. Baseboard heaters.



Is a junction box necessary?

You’ll need a junction box if you can’t make the connections inside an existing electrical box. You should install the box with the opening facing out from the wall so all the wires inside are accessible. Like any electrical box, it should be installed so that the edge of the opening is flush with the wall.

How can I add light to a room without a ceiling light?

Explore these ways to light a room without ceiling lights

  1. Floor lamps. In a dark room, floor lamps can bring the night to life. …
  2. Plug-in wall sconces. …
  3. Plug-in ceiling pendants. …
  4. LED strips. …
  5. String lights. …
  6. Table lamps. …
  7. Portable lights. …
  8. Star lights.

How do you install a ceiling light without a junction box?



Quote from the video:
Quote from Youtube video: First. So i take. The center part of the light. I found some wood to screw to. And i screwed it to the wood and the other ones you can see i put them in an angle with coarse screws.

How do you ground a light fixture?

Installing a Ceiling Light – Conduit no Ground Wire ·

What happens if ground wire comes off?

If a ground wire comes off your light fixture, you can try to reattach the wire, or ground the fixture a different way. The ground wire’s purpose is to protect you in case the metal part of the fixture accidentally becomes energized. This saves you from a shock if the fixture gets energized and you touch it.

Is a ground wire necessary?

The ground wire is not strictly necessary for the operation of a device, but it is still an important feature. This wire is designed to provide a path for electrical current to travel if the normal paths aren’t available. This could be because the other paths are damaged, or there is too much electricity for them.

How do you ground a wire without a ground?



You can wire a three-prong outlet to the GFCI by connecting it to the LOAD terminals. That outlet will get ground fault protection from the GFCI. It must also have a label that says “No Equipment Ground.”

Is it OK to leave a ground wire exposed?

Grounding wires, especially those running through grounding rods on the exterior of your home, are exposed. The grounding wires are safe to touch unless there is an electrical surge that causes electricity to flow through the grounding wire.

Can you run a bare ground wire through the wall?

Bare naked ground conductor is perfect fine in certain space. The reason the CODE requires the ground conductor to be inside the conduit is for protecting the conductor from being damaged by any mechanical means e.g., gardener weed whacker. In fact, you can use PVC to house the ground conductor.

Can you tape ground wires?

Your ground wire is almost always green or bare copper. You can label this with a small piece of electrical tape by writing a “Ground” or “G” on it and wrapping it around the wire. If you do not see a green or copper wire, your wall box likely does not have a ground wire and is incompatible with the Brilliant Control.

Can a bare ground wire touch metal?



No problem with a bare ground wire touching any metal case/box if the metal cases are grounded. It is cheaper to make the wire.

Can you tie neutral and ground together?

No, the neutral and ground should never be wired together. This is wrong, and potentially dangerous. When you plug in something in the outlet, the neutral will be live, as it closes the circuit. If the ground is wired to the neutral, the ground of the applicance will also be live.

Does the ground wire need to be connected to the box?

Quote from the video:
Quote from Youtube video: You don't need the extra ground wire connected to the box. You only need to connect.