Can you mount a light fixture without a junction box?

For example, if you have a light fixture that doesn’t need a box for mounting, but the wiring connections are not protected by some kind of cover, then you can’t use the fixture without a junction box. Or, if a fixture meets all of the criteria of a box but lacks a cable clamp, don’t use it without a box.

How do you attach a light fixture junction box to a wall if there is no stud?

Quote from the video:
Quote from Youtube video: After we have our braces in between our studs we're going to take our hammer and right on the sides. There's some spikes we're just going to knock that into the studs.

Does a junction box have to be attached to a stud?

They don’t need to be fastened to a stud, so you can install them anywhere.

How do you center a vanity light fixture when the junction box is off center?

Quote from the video:
Quote from Youtube video: Place it right across the center. It's going to go from about here to there let me cut a furring strip grab two drywall screws and come right back firing strip is going to go on the wall like. This.

What to do if there is no junction box?

Quote from the video:
Quote from Youtube video: I cut the wires and stripped them have them ready but i don't hook them up to the power yet i want to get everything done in the lights. First. So i take. The center part of the light. I found some

Is a junction box necessary?

You’ll need a junction box if you can’t make the connections inside an existing electrical box. You should install the box with the opening facing out from the wall so all the wires inside are accessible. Like any electrical box, it should be installed so that the edge of the opening is flush with the wall.

Can you install a vanity light without a junction box?

You can’t install a light fixture without a junction box, but the fact that there’s no box at the spot where you want to install the light doesn’t mean you can’t install the light.

What is a pancake junction box?

Orbit Industries’ Round Pancake Boxes with shallow depths of 1/2″ or 2/3″ are used to mount lighting fixtures on walls and ceilings. They include conduit knockouts and non-metallic clamps on selected models for easy installation. Do not use as a ceiling fan support box.

Does an electrical outlet have to be attached to a stud?

Specialized hardware does exist to allow putting an electrical outlet or switch absolutely anywhere without reference to a stud. All these items are generally referred to as ReWork boxes — boxes to be installed after the initial construction has passed.

How do you center an off center ceiling light without moving the junction box?

Quote from the video:
Quote from Youtube video: I attached the mounting plate and filled the screw holes with spackle before attaching the light. Now the light is centered over the table in both directions.

How do you center a vanity light without moving the electrical box?

Quote from the video:
Quote from Youtube video: We got it right there. It's gonna fit right there you have plenty of room there will knock out two of these knockouts on the left. And the wire will come in from behind it.

How do you hang a light fixture without a stud?

Quote from the video:
Quote from Youtube video: They kind of go in and you bend the flanges back. And that's one way then the most common way that we put electrical boxes where there's no stud.

How can I extend my electrical wire without a junction box?

There are many ways you can splice wires together. In some cases, you may simply use a few wire caps. In other cases, you may try to solder them together. You might use a wire cap or nut if you are working with smaller wires; however, you may decide to use a butt splice if you are working with larger wires.

How do you install an electrical box without studs?

Quote from the video:
Quote from Youtube video: You slide it into the hole that you cut out and when you start to tighten this screw down it flips this wing up and compresses the drywall in between the front lip and the wing.

Do old houses have junction boxes?

Another common problem that you’ll run into with older homes is unprotected junction boxes. Essentially, junction boxes are where wires and splices meet up to produce electricity. So, you definitely don’t want to stick your hand into here at any time.

How do I install a junction box this old house?

Quote from the video:
Quote from Youtube video: The box and feather the opening with the edge of the utility knife until the box fits snug to install run wires into the box and position it in the hole.

Can I put a junction box behind drywall?

Junction box covers must remain accessible; they cannot be covered with drywall or other surface material. A junction box is most often used where an electrical circuit branches off in two or more directions from a location where an outlet or fixture is not practical.

Can you splice wires without a junction box?

Short answer: NO. Long answer: All splices must be in a junction box, and the junction box must be accessible.

Is it OK to splice Romex?

It must be noted that while it is possible to splice different types of Romex wire—12/2 to 12/3, for instance—you should never splice together wires of a different gauge. Wire gauge is determined by the amount of amperage the wire is expected to carry.

Are in wall splice kits legal?

The only condition is the splice has to be fished, meaning you cannot legally use this splicing device where there is no drywall yet installed because the NEC expects you in this case to use a proper junction/outlet box, so the splice can later be accessed.