The spacing of the joists governs the recommended thickness of the plywood subfloor. Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but you should use slightly thicker 3/4-inch plywood for joists spaced further apart.
How thick should plywood be under tile?
Plywood must be installed over an adequate subfloor and must be at least 1 1/8″ thick when combined with the subfloor. Interior-grade plywood and particleboard are not considered strong enough for a tile installation.
What kind of plywood do you use for tile subfloor?
Exterior grade or plywood should be used for the substrate. Under no conditions should you use veneer-bond plywood. Veneer plywood is interior-grade plywood that has a top and bottom layer of very thin hardwood bonded to it.
What size plywood should I use for tile?
The subfloor under the tile should be at least 1 1/8″ thick, with a minimum of 5/8″ thick exterior grade plywood topped by 1/2″ cement backer board.
How thick should my plywood subfloor be?
The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch.
What thickness subfloor is recommended?
The spacing of the joists governs the recommended thickness of the plywood subfloor. Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but you should use slightly thicker 3/4-inch plywood for joists spaced further apart.
Can I install tile on plywood subfloor?
While you can lay tile directly over a concrete slab using thin-set adhesive, don’t make the mistake of applying tile directly to a plywood subfloor. No matter how firm the subfloor; the plywood will expand and contract at a different rate as the tile, causing cracks to develop in the grout lines or tiles over time.
What type of plywood is used for bathroom subfloor?
CDX plywood
Plywood as a Subfloor Material
Traditionally, exterior grade plywood has been the subfloor material of choice for many bathroom flooring projects. Plywood is made by gluing alternating layers of wood veneer. CDX plywood (¾”) in particular is used often because it has a high level of resistance to moisture and humidity.
What should I put down on floor before tiling?
Underlayment is something you put on top of your substrate to prepare it for tiling. The substrate (or subfloor) is the ground, whether it’s made of plywood or cement. Cement board or backer board are the most standard underlayments. They come in various thicknesses for different spaces.
How thick should subfloor be in bathroom?
Make Sure Your Subfloor is Structurally Stable
The installation guide for 1/4 inch HardieBacker recommends having wood subfloors made of 5/8 inch exterior grade plywood or OSB (oriented strand board) that is 23/32 inches thick.
Can you use 19/32 OSB subfloor?
OSB can be used for subfloors, although it is not as common as CDX. For 19/32-inch-thick panels, the joists should be 20 inches on center. For 23/32-inch-thick panels, the joists should be at least 24 inches on center.
How thick plywood do I need?
Using ½” thick plywood for walls is standard, although the International Residential Code specifies only 3/8” wall sheathing when studs are spaced 16” apart and the siding is attached to the studs and not just the plywood. For buildings with siding attached only to the sheathing, the IRC requires ½” plywood.
What thickness is 15 32 plywood?
Thicknesses
| NOMINAL VS. ACTUAL SIZES | |
|---|---|
| 1/4-inch | 11/32 |
| 1/2-inch | 15/32 |
| 5/8-inch | 19/32 |
| 3/4-inch | 23/32 |
Is 15 32 The same as half inch?
The reason un-sanded plywood, such as sheathing, is described as 15/32-in. thick is to reflect the manufacturer’s tolerance of 1/32 inch, even though in layman’s terms the sheet is equivalent to a 1/2-in.
How thick should plywood be to walk on?
Sizing the Plywood
No matter what the spacing is on your ceiling joists, 3/4-inch plywood should be used if you plan on walking on it. If you plan on placing the plywood around the perimeter of the opening or door and using it only to store light boxes or materials, 1/2-inch-thick plywood should suffice.
How much weight can a 3/4 plywood hold?
A 12-by-36-inch piece of 3/4-inch fir plywood can easily support 50 pounds. However, a 12-by-36-inch piece of 1/4-inch thick plywood will not support that much weight. It will only support about 5 pounds before bending.
Is it better to use OSB or plywood for subfloor?
OSB has a lower resale value than plywood due to its lower strength. For this reason, few homeowners prefer OSB in their homes. Apart from costs, plywood is superior in all the other areas, such as the strength of the structure. For this reason, it’s a superior material for use on the subfloor.
