Should a washing machine be on a GFCI outlet?
GFCI Protection:
210.8(A)(10) – All 125V, 15a and 20a receptacles installed in “Laundry Areas” shall have GFCI protection. The NEC doesn’t require GFCI protection for clothes washing machines specifically, but it does for “Laundry Areas.”
Where should GFCI outlets be installed?
GFCI outlets should be installed in any potentially wet or damp areas such as kitchens, bathrooms, laundry rooms, outdoors, basements, garages and workshops. Damp areas can make you prone to dangerous electric shock but using a GFCI outlet can greatly reduce your risk of injury.
How close can an electrical outlet be to a water source?
6 feet
According to the National Electric Code, any receptacle within 6 feet of a water source needs to be protected with a GFCI.
How far should an electrical outlet be from a water source?
6 feet
According to the National Electric Code (NEC), GFCIs are required to be installed to protect any receptacles within 6 feet of a water source.
How far does a GFCI have to be from a sink?
Generally, all 15 or 20-amp, single phase, 125-volt receptacles “within 6 ft.” of a sink, tub or shower must be GFCI protected. For a sink, the measurement starts “from the top inside edge of the bowl of the sink”. For a bathtub or shower, the measurement starts at “the outside edge of the bathtub or shower stall”.
Is there a difference between GFI and GFCI?
Ground fault circuit interrupters (GFCI) and ground fault interrupters (GFI) are the exact same device under slightly different names. Though GFCI is more commonly used than GFI, the terms are interchangeable.
How close can a GFCI outlet be to a shower?
Outlet Receptacles
You should keep the receptacle at least 6 feet away from the edge of a bathtub or shower and at least 1 foot away from sinks.
Can I use 15 amp GFCI in bathroom?
Do you? Kitchens and bathrooms should always have 20 amp gfci outlets. However, you must be using number 12 wire for 20 amp gfci or regular outlets If your wiring is number 14 guage then use a 15 amp. So, the wire size and breaker size together should be rated for 20 amps!
Does a dishwasher have to be GFCI protected?
GFCI protection is not required for receptacles serving appliances like dishwashers, or convenience receptacles that do not supply countertop surfaces. Receptacles installed within 6 ft of the outside edge of a wet bar sink must also be GFCI-protected [210.8(A)(7)].
How close can a switch be to a shower?
Unless installed as part of a listed tub or shower assembly, switches will not be installed in wet locations. The NEC states that a damp/wet location is within 36 inches of either the edge of a tub sink or basin or an area that is subject to spray.
Does a light over a shower need to be GFCI protected?
A. Master electrician Sean Kenney responds: The short answer is yes. Although the NEC does not require either the switch or the light fixture to be GFCI-protected, most lighting fixtures designed for use in a shower stall require GFCI protection to meet UL requirements.
Are switches allowed in bathrooms?
Light switches are not allowed in bathrooms it has to be a pull cord or a switch outside.
What is code height for electrical switches?
Although 48 inches is the standard height electricians prefer for most rooms, this can be altered if local building codes permit. For example, switches are often placed at different heights in kitchens to allow for countertops.
Why do electricians install outlets upside down?
Electricians may position the outlet in an upside-down position so that you can quickly identify the switch-controlled receptacle. Since it stands out visually to most people right away – it provides convenience to the occupants to easily remember which outlet is switch controlled.
How high should outlets be off the ground?
about 16-inches
Generally, you want to mount receptacle boxes with the bottom of the box about 16-inches off the floor.
