Any brand should fit. If they don’t stock it they can order it. I would first try a local hardware store they are likely to carry a store brand for less than a Delta part. You will also need the clip that attaches the rod to the pivot lever.
Can I replace just the sink stopper?
Inspect the rubber seal on the bottom of the stopper head. If the seal is cracked or brittle, the stopper should be replaced. If it’s still in good condition, you can reuse it.
Are all bathroom sink stoppers the same size?
There is no universal drain hole diameter that applies to every bathroom sink, but 1 1/2 inches is the most common size for a bathroom sink drain opening, according to Signature Hardware. Some bathroom sinks have a slightly narrower opening at 1 1/4 inches, while others are a bit wider at 1 5/8 inches.
Is there a universal sink stopper?
This Danco universal slit-type sink stopper is truly universal. It fits perfectly in both my tubs even though both drain openings are of different sizes. It’s made of a heavy duty and durable rubber, and is white in color, along with an attached chain.
Can you replace bathroom sink stopper?
Quote from the video:
Quote from Youtube video: If you want to replace your bathroom sink stopper perhaps the finish on it is marred. And it's installed so that you can't just lift the stopper out of the drain hole.
How do I know what size sink plug I need?
To determine the right size of plug, you need to measure the diameter of the drain mesh or the underside of your current plug. Then you’ll be able to shop for the style of sink plug you want and be able to choose the right size the first time.
Are sink drains universal?
Drains are measured at the threaded portion of the drain (this is the section that will go through the sink and countertop). A standard sink hole is 1-½” in diameter and will accommodate most lavatory drains.
How do you fix a broken sink stopper?
Quote from the video:
Quote from Youtube video: You can go down there check if it's not tight you see that free flow you just reset it in and then put your stopper in the up position. So then you can put your rod down.
How do you reattach a bathroom sink stopper?
Quote from the video:
Quote from Youtube video: In the opening in the back of the the pipe there. So now we are going to insert the new pit rod into the back of the pipe. You'll want to test to make sure that it actually goes into one of the holes.
Can you replace a pop up sink plug?
Pop up sink plugs can be removed and replaced easily. For more complex installations, use an adjustable wrench or wrench.
How do you replace a sink plug hole?
Quote from the video:
Quote from Youtube video: And pulling this you pipe off. Now pull this piece completely off now reach around back and squeeze. This little metal clip and push away and that will release it next loosen this nut.
How do you install a sink pop-up drain stopper?
Quote from the video:
Quote from Youtube video: Take a pair of pliers. And loosen the lock nut remove the p-trap to free up the tail pipe then go ahead and remove the old flange. You'll want to clean up the area of the drain hole in the sink.
How do you remove a Click Clack plug?
Quote from the video:
Quote from Youtube video: Grip it and turn that anti-clockwise until it comes loose. And then when it's loose. It will just turn. Until it comes out and so there's a thread at the bottom that fits into the fitting.
What is the difference between popup and click clack waste?
The difference between “pop-up” and “click-clack” waste is simply the way in which the drainage plug is opened and closed. The “pop-up” waste operates the drainage plug by lifting a lever, which is located directly behind the faucet, up and down.
What is a click clack plug?
What is a Click Clack Waste? This is the most popular option of wastes, as it has a simple design making it easy to use. You simply push down on the stopper once to close it and click it again to open it. Click clack wastes are also referred to as push button wastes or sprung plug.
What is a click clack mechanism?
How Does the Click Clack Mechanism Work? The quirky name for this opening mechanism comes from the clicking and clacking sounds that the locking function makes when you convert the sofa into a bed. To convert, just fold the mattress forwards until you hear the click. Then, fold it back until it lays flat.
How does a push button sink plug work?
It’s actually a fairly simple design. When the lift rod is pulled upwards, it pulls the pivot rod up as well. This pivot rod is attached to the stopper, which is pulled down, effectively sealing the sink.
