Why are some of my LED lights not working?

Heat buildup, screwing bulbs too tightly, or placing LEDs in improper electrical circuits and accessories are common causes of LEDs stopping working. In addition, poor quality capacitors, drivers and diodes are also leading factors in reducing the life of LED bulbs.

Why have half my LED lights stopped working?

If the LEDs will not light up at all, then this could be down to a faulty power supply. Solution: If you have several power supplies, then try a different power supply onto the same strip to see if this now works. If it does, then you have a faulty power supply and will need a new one.

Why won’t my LED lights mix colors?

If your LED strips are stuck on one color when you change colors, it’s probably because you have been pressing the same color button, which reaches peak value. Try using the reverse button to adjust it higher or lower. If still to no avail, check the contact of your pins and reconnect.

Why are half of my LED lights different colors?

Over Heating. If LED strips are experiencing overheating, they can change colors; reputable brands have proper heat dissipation elements in their adhesive. Their adhesive has ceramic particles that can wick away heat from the strip and scatter it away from sensitive diodes.

Why is only one strip of my LED lights working?

If your strip light doesn’t turn on, check your pin connections. … If you can’t change the colors of your strip lights, try flipping them around. Make sure to double check your power source.

How do you test LED lights?

Quote from the video:
Quote from Youtube video: So you have to connect the positive of the multimeter to the longest lead and the negative to the smallest.

How do you fix a half LED light?

Quote from the video:
Quote from Youtube video: If you take a screwdriver or utility knife when you open this up you'll expose the two fuses that are there and you can see that if half the lights are out it could be that one of those fuses.

Why are half string lights out?

A light bulb has come out of its socket or is half out of its socket and it has brought down the circuit. For light strings that commonly have over 50 bulbs, they are constructed in 2 or more continuous circuits. If a bulb is missing in a circuit only the bulbs in series of it will go out.

How do you fix half led strip lights?

Quote from the video:
Quote from Youtube video: Either side of the section. So that I know which section is the offending section to cut it out you could also mark it with masking tape so that you are aware when the power goes out.

How do you fix your LED lights if they are different colors?

Step 1, Make sure all part of the LED strips kit are connects right and powered. Step 3, Press the “FADE7” button ,it will flash one second. Step 4, Turn on the LED strips again, press Red, Green, blue button one by one, it will change to its original color.

How do I reset the color on my LED?

Quote from the video:
Quote from Youtube video: Enough we're just going to hold it all the way and then if you eventually hold it long enough they should turn white blue on the screen.