Yes you can install it. I would use a very rigid highly rated (100 lbs plus) toggle anchor and epoxy anchor to tile.
Can you install a shower door without studs?
Glass shower doors and walls that make up enclosures tend to be very heavy. As such, they need to be supported by fasteners that go into wall studs and not only into drywall. If they are not supported by a stud, then a glass shower enclosure could pull out of the drywall and ruin the entire installation.
How do you anchor a frameless shower door?
Quote from the video:
Quote from Youtube video: Then take the anchor and fold into the middle before inserting the anchor into the hole and tap flush insert key to pop anchor into the wall. Now apply a continuous 3/16 inch bed of silicone.
How do you secure a shower glass to the wall?
Quote from the video:
Quote from Youtube video: The first step is to attach the channel to the wall. Set the channel in position and ensure that it's square with the spirit level mark the hole points on the wall. Using a pipe detector.
How do you anchor shower glass?
Quote from the video:
Quote from Youtube video: So I don't need to use an anchor if by chance when you drill your holes. If there's nothing behind there you're gonna need to use some heavy weight anchors which likely come with your kit.
How do you install a frameless glass door?
Quote from the video:
Quote from Youtube video: So you got to make sure your walls are nice and flat that makes it a lot easier because you don't have any track to hide it on.
Can you install frameless shower door on fiberglass shower?
Note that you can’t install a frameless shower door in an acrylic or fiberglass door opening that doesn’t have wood blocking behind it because thin plastic materials don’t provide enough support for the door and won’t hold the screws.
Do frameless shower doors leak?
Frameless shower doors do not “leak”. Although there are very small gaps in the hinges and on the sides of the door, it is highly unlikely water will pass though these gaps unless water pressure is directly pointed at these seams.
Why have a curbless shower?
Curbless showers don’t have surface joints, so there are fewer places for mildew and grime to collect. Curbless showers add visual appeal and maximize space. Getting rid of the shower barrier allows the bathroom floor to flow from wall-to-wall creating a seamless look and significantly larger appearance.
How do you attach a glass shower wall to tile?
Quote from the video:
Quote from Youtube video: So that means i'll need to drill out a 5 16 inch hole and insert the provided wall anchors. If you have a stud you can pre-drill a smaller hole and drill directly into the stud.
Can you drill into a fiberglass shower?
Whether you are installing a new fiberglass shower surround or need to mount shelves or caddies on the shower walls, you likely need to drill into the fiberglass walls. Fiberglass, a dense material, can be difficult to drill into without leaving messy, fractured holes.
Should I install shower door before or after tile?
Install a Framed Shower Door
Before you set the pieces in place and mark the positions of the holes, lay masking tape on the tile. Besides stopping the bit from wandering, it will make it easier to mark the holes.
How do you install a shower door on a fiberglass shower?
Installing a shower door over a fiberglass shower is the easiest type of shower door to install because there is no need for additional anchors or masonry bits like there is for concrete or tile installation. With a fiberglass shower all you have to do is screw in the shower door and seal it in place.
How much does Lowes charge to install a shower door?
Lowe’s shower door installation cost
Lowe’s shower door installation costs start at $200 for labor alone, plus $250 to $750 for a framed shower door or $400 to $1,300 for a frameless door. Lowe’s charges $35 for a detailed estimate, which applies to the installation cost.
How do you install a shower door on a fiberglass tub?
Quote from the video:
Quote from Youtube video: Before you begin make sure the door and panel fit within the tub enclosure measure the height and width of the tub enclosure. And compare them with those of the door and panel you wish to install.
How does a frameless shower door work?
On a frameless shower enclosure when the door is open there is nothing around the edges, no metal, only the hinges where the door meets the panel. This look allows for a more open and modern feel to your bathroom and on a practical level eliminates some of the gunk that can build up between the glass and metal.
Do frameless shower doors need a header?
When installing a frameless shower door, you may need a header, which is metal support at the top of the shower that attaches to a wall and keeps the shower stabilized. A support header, therefore, takes off some of the tension to prevent the weakening of the glass-to-glass connection over time.
Do frameless shower doors have a track?
Frameless shower doors are made from durable glass and do not use a track. Instead, they attach to the wall of the bathroom and open in the same way as a door.
Is it hard to install a frameless shower door?
Homeowners looking to install a frameless shower door on their own and save money usually lack enough skills to handle the installation process. Although anyone can buy the door and hinges at a local home improvement store, installing the glass enclosure requires some level of skill that many people do not have.
How thick are frameless glass shower doors?
There are typically two thickness options for frameless shower door glass: 3/8″ and 1/2″. 3/8″ glass is the minimum thickness that will provide the necessary stability and soundness of the glass door. This is a popular choice because it is less expensive than thicker glass.
Can I install a shower door myself?
In short, yes, you can install your new shower enclosure on your own. However, that may not be the best idea. In some cases, replacing your shower door might be a reasonably straightforward process.
