What happens if the toilet doesn’t have a shut-off valve?

Some older toilets don’t have shutoff valves behind them. If this is the case for you, you’ll have to use the wooden board method or simply cut off the main water supply for your entire home to turn off the toilet’s water supply.

Does every toilet have a shut-off valve?





Toilets, just like other plumbing fixtures, come with a shutoff valve. The shutoff valve is mostly located in the toilet’s water supply line. It’s necessary for every toilet to have its dedicated shutoff valve for convenience.

Can I install a bidet without turning off the water?

The pipe is PVC, you can use a glue on valve or a push to connect valve. It may be a push to connect fitting and if so removable without cutting the pipe, if not you need to cut it off just below it to leave as much pipe above the floor as possible.

Can a bidet be added to an existing toilet?

Bidet toilet seats are designed to be installed by anyone, no special skills needed. This type of bidet attaches directly to your existing toilet, so you don’t even need to worry about new plumbing. You also don’t need to worry about whether the bidet water is clean (we know you were wondering)!

How do you isolate a toilet?

Quote from the video:
Quote from Youtube video: To turn it off you'll need a flathead screwdriver. The slot on the isolation valve should be following the pipe break that's when the water is on.

How do I turn the water off to my toilet without a knob?





To turn off water supply to your toilet, look for the toilet shut off valve on the left-hand hand side on the rear wall of the toilet close to the bottom. Turn this valve clockwise until it can’t turn anymore. Sometimes your toilet will have a push/pull valve.

How do you dry your butt after using a bidet?

Most Bidets have a built in air dryer for you to use. If the one you are facing does not, use toilet paper or other paper towels to dry yourself off.

How do I know if a bidet will fit my toilet?

To determine line C you will need to measure from the center of the two boltholes to the outside front of the toilet bowl. If the measurement turns out to be about 17 ¾” or 45cm, your best fit would be an elongated Bidet.

How do you install a bidet attachment?

Quote from the video:
Quote from Youtube video: Using a screwdriver loosen. The mounting screws. And retaining nuts on the underside of the seat. And remove it from there add the adjustment plates to the bidet assembly.

Why does the US not use bidets?



So, why hasn’t America embraced the bidet? Well, bathrooms in the US aren’t really built for bidets. There’s no space or additional plumbing setup for bidet fixtures. But the biggest reason it hasn’t caught on comes down to habit.

How difficult is it to install a bidet?

A freestanding bidet to your home requires dedicated plumbing lines, but bidet toilet seats and hand-held bidet sprayers are easy to install and require very little space in your bathroom.

How do you hook up a tushy bidet?

Quote from the video:
Quote from Youtube video: Through remove the toilet seat then connect the cold water supply to the tushie followed by the hot water supply. And then position the bidet onto the toilet.

How long does it take to install tushy bidet?



about 10 minutes

Simple Installation. This unit only takes about 10 minutes to install. Self-Cleaning Nozzle. The nozzle is fully self-cleaning.

Is TUSHY hard to install?

They’re inexpensive and easy to install. And if you’re a parent like me, the best part about a bidet is that it means no more wiping toddler butts! In this piece, we’ll show you how to install a TUSHY bidet. So ditch the toilet paper, and turn the toilet in your home into a bidet with this easy-to-install kit.

Does TUSHY need an outlet?

Both the Classic and Spa model do not require any electricity, not even a wall plug or battery. TUSHY Classic and Spa run entirely off the existing water pressure and temperature of your home, with TUSHY Spa using your bathroom sink’s hookups for warm water control too.

Does TUSHY work with all toilets?



TUSHY fits all standard toilets and some one-piece toilets. Doesn’t require electricity or plumbing. Just unscrew the toilet seat, pop the TUSHY on, connect to water, and you’re done.

Does TUSHY bidet have warm water?

We made our most soothing bidet attachment even better! The TUSHY Spa 3.0 comfortably cleans your bum with adjustable warm or cool fresh water, the same as your sink or shower. (Never the bowl!) Now with NEW upgrades for an even more spa-like clean.