How do you clean a concrete floor after removing vinyl tiles?
Quote from the video:
Quote from Youtube video: Else so as you can see it just kind of this is a fresh blade I just put on and you can kind of wiggle. It underneath the paper and it will tear off strips of paper about like this.
Can you lay tile over old mastic?
Contractors we have spoken to think the best approach is to put down new ceramic or porcelain tiles right over the existing adhesive. They said “capping” the mastic in a seal coat or thin layer of concrete wouldn’t be a good idea- they’d need to pour rather a lot of concrete for that.
Will Thinset stick to old adhesive?
Fortunately, most grout and mortar manufacturers make a thinset which will bond to “cut back” adhesive. Typically, the “cut back” should be scraped smooth so the tile is not sitting on ridges of adhesive – although it does not have to be absolutely flat.
Can you lay tile over vinyl flooring on concrete?
If the existing vinyl floor was installed over concrete and is glued down firmly, you should be able to tile right over it without any problem. Scrub the floor first to remove any dirt and grease then apply a bed of thin-set mortar and tile.
How do you clean mastic off concrete?
Start scrubbing the mastic with your acetone-soaked brush until the glue melts and lifts from the concrete. Wipe the mastic away with a clean cloth as you go, and clean the concrete once you’re finished with a mop and water. You can also attempt to use paint thinners, turpentine, or WD-40, but be careful.
How do you remove glue from floor after vinyl tile?
Quote from the video:
Quote from Youtube video: And spray it onto the floor you can let it sit a little bit that way it actually has time to work down in to relieve that glue then we're going to take our scraper. And start scraping that glue. Off.
Do you have to remove vinyl adhesive before laying tile?
Adhesives used to install laminates, vinyl and other types of flooring often remain attached to the substrate after the old floors are removed during renovations. To install the new tile properly, you must first remove all traces of the adhesive to provide an ideal surface to attach the tile.
How do you install porcelain tile on a concrete floor?
Quote from the video:
Quote from Youtube video: The thinset evenly. Using the notched side of the trowel avoid circular and swirling patterns and set your tile. Use a small thin trowel to remove excess on the edges of your tile.
How do you remove asbestos mastic from concrete floor?
Mastic must be removed using wet methods when it contains asbestos fibers. This can be done by dissolving the mastic with a suitable solvent, then using a HEPA-filter equipped vacuuming device to remove and pick-up the resulting slurry. Mastic cannot be ground, sanded or abraded to accomplish removal.
Can you lay porcelain tile over vinyl flooring?
Quote from the video:
Quote from Youtube video: Yes you can install ceramic tile directly over a vinyl flooring.
Will thinset adhere to vinyl?
Can I tile over vinyl? Most manufacturers’ of tile cement (thinset) have developed a specialty thinset for setting tile that bonds well to sheet vinyl. However, as with all tile installations, the entire subfloor below the tile is important – not only the layer to which the tile is bonded.
Can I put tile on top of vinyl flooring?
Right:You can tile over some, but not all vinyl floors. much movement in the system and may lead to a failure in the tile layer. Even if the tile and vinyl form a good bond together, if the vinyl isn’t secured to the substrate or allows too much bending, the tile could fail.
Can you lay porcelain tile over linoleum?
If your linoleum floors are starting to become loose, uneven, or warped, installing tile over them is NOT recommended. Tile needs a smooth, level base in order for it to stay securely in place. Damaged linoleum floors should be removed so that your new tile can go onto an even surface.
Can you put ceramic tiles over vinyl tiles?
Resilient flooring with a cushioned base will not work under ceramic tile. Most luxury vinyl planks are not suitable for tiling over because this flooring typically is laid as a floating floor, with no adhesive. This means the flooring can possibly shift beneath the tile, likely causing damage to grout joints.
Can you lay porcelain tile over laminate flooring?
To answer your question: Yes, it is possible to install ceramic tile on square-edged laminate tops.
How do you tile over asbestos tile?
You can tile directly over asbestos with new tile, including ceramic tile. Take care to choose a tile whose thickness is not going to create a problem, and choose a tile that is rated for floor use. Use a Portland cement-based adhesive to adhere the new tiles to the old.
Will mortar stick to laminate?
Quote from the video:
Quote from Youtube video: But instead paper this is a fiberglass reinforced paper the countertop itself the laminate is not friendly to mortar we know that.
Will mastic stick to laminate?
Tile mastic doesn’t stick well to Formica and other laminates, and the manufacturers won’t warranty it if you try. The most cost-effective solution in terms of time and money is a peel-and-stick product. As long as your existing backsplash is in good condition, it’s a good candidate for this.
Can you tile over vinyl backsplash?
It’s possible to tile over a plastic laminate backsplash if the backsplash has square, rather than molded or rounded, edges. Here’s how to go about it: Clean and dry the backsplash to remove any dirt or grease. Sand the plastic laminate with coarse (50-80 grit) sandpaper, so the tile adhesive will adhere to it.
What will mastic stick to?
Mastic and thinset mortar are types of adhesives most often used for ceramic, porcelain, and glass tile installations.
Some areas that work well with thinset include:
- Shower pans.
- Shower walls.
- Bathroom floors.
- Bathroom walls.
- Kitchen floors.
- Kitchen countertops.
- All floors.
