What color wire goes where on a thermostat?
This is the most typical thermostat wiring style, and it applies to systems that regulate both heat and air conditioning. The wires are typically arranged as follows: red for 24-volt hot, white for heat, yellow for cooling, green for the fan, and blue for common (although the common wire may be a different color).
How many wires are needed for a programmable thermostat?
2 wires
The most basic thermostat has 2 wires; usually a red and a white wire. Two wire thermostat wiring is used for furnaces only and usually doesn’t need a “C” or “Common” wire. That’s why we only need two wires: Red wire for power (24h).
How do I wire a programmable thermostat?
Quote from the video:
Quote from Youtube video: Typically you attach the plate first hold it in place level. And mark the mounting holes. Drill the holes and tap in wall anchors. Pull the wires through and attach the plate with screws.
What happens if you wire a thermostat wrong?
Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.
Should my thermostat be on E or F?
The thermostat fan operation switch, labeled FUEL SWITCH in the diagram below, is factory-set in the “F” position. This is the correct setting for most systems. If your system is an electric heat system, set the switch to “E”.
What is white wire on thermostat?
The white wire underneath your thermostat connects to your heating system. It terminates at your air handler or furnace. The white wire connects to terminal W in industry-standard thermostats.
What wires go where on a thermostat?
Thermostat Wiring Tips
The W wire is connected to your heating system. If your thermostat controls your heat, you will have a white wire. The Y wire is yellow and connects to your air conditioning compressor. The G wire is green and connects to the fan.
What does R and W mean on thermostat?
R (or) RH wire – power. G wire – fan. W wire – heat. Y wire – cooling compressor.
What is Y wire on thermostat?
Y – This is the terminal for cooling or air conditioning and goes to the compressor relay. Typically a thermostat wire pull is made to the air handler on split systems and then this wire is spliced for the separate wire pull which is made to the condenser.
Does Y go into Y1 or Y2?
In conventional cooling systems, Y/Y1 controls the first stage of cooling and Y2 controls the second stage, which helps cool down the home faster. In heat pump systems, Y1 controls your compressor, which heats and cools your home.
What does Y1 mean on a thermostat?
Y or Y1. In most systems, the Y or Y1 wire controls your cooling system. If you have a heat pump, your Y or Y1 wire controls your compressor. Your compressor is responsible for heating and cooling your home.
