Wear safety glasses or goggles, or a face shield (with safety glasses or goggles). Wear an approved respirator or dust mask when exposed to harmful or nuisance dusts.
What PPE is necessary when using a saw?
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles). If work is dusty, use a dust extraction system, and/or respirator or dust mask. Wear appropriate hearing protection. Wear protective footwear when required.
How do you keep a circular saw guard up?
Quote from the video:
Quote from Youtube video: The blade guard will automatically retract when making a cut. You can manually retract the guard using this lever that's useful when making plunge cuts.
What are 2 things you should avoid when cutting with a circular saw?
Circular Saw Safety Tips
- Always wear eye protection when operating a circular saw. …
- Avoid loose clothing, hair or jewelry that can be pulled into the saw.
- Stand to the side when cutting to avoid potential kickbacks. …
- Check the blade for sharpness—sharp blades work better and are safer.
What can you do to prevent contact with the blade when using a circular saw OSHA?
For all circular saws where conditions are such that there is a possibility of contact with the portion of the saw either beneath or behind the table, that portion of the saw shall be covered with an exhaust hood, or, if no exhaust system is required, with a guard that shall be so arranged as to prevent accidental
Why am I getting kickback on my circular saw?
Overheating a saw blade can cause it to warp and result in a kickback. Buildup of sap on the blades, insufficient set, dullness and unguided cuts, can all cause an overheated blade and kickback. Never set a blade deeper than is required to cut the work piece 1/8 in. to 1/4 in.
What PPE are you likely to need for a job requiring cutting with a circular saw?
Safety glasses and face shield must be worn at all times in work areas. Appropriate hearing protection (Class 5-SLC80>26 dB) must be worn. Protective, steel-toed work boots must be worn.
What is the proper safety guard for power saws?
An upper guard must cover the entire blade of the saw. A retract- able lower guard must cover the teeth of the saw, except where it makes contact with the work material. The lower guard must automatically return to the co vering position when the tool is withdrawn from the work material.
Should you wear gloves when using a circular saw?
7) You’re Wearing Gloves
Yes, wood has splinters, and gloves seem like a good idea. But they increase the risk of your hands getting caught in the saw, so they are a big no-no when operating any power tool.
Is it okay to cut wet wood with a circular saw?
If you’re cutting wet wood set the depth so that the entire gap between the teeth is clear of the board you’re cutting. This will stop your saw and cut line from getting clogged with wet saw dust.
How do I stop a kickback on a saw?
Quote from the video:
Quote from Youtube video: You can use your hands like I'm using here and if it's small you can use a pencil or a small stick whatever it takes to hold that piece in place so that they can't move as it passes through the blade.
How do you stop a kickback?
Quote from the video:
Quote from Youtube video: Now one of the best tools for the job is a splitter which is a plate that mounts aft of the blade. With the face of the splitter that faces the fence lined.
How do you cut a 2×4 without a kickback?
Quote from the video:
Quote from Youtube video: And stop the saw from moving if it pulls too hard it can twist the blade. And once again this causes binding.
Why do people remove the blade guard on table saws?
Quote from the video:
Quote from Youtube video: Through cuts such as dedos. And grooves there sometimes ineffective when making bevel cuts or they might need to be removed altogether. And you'll need to remove.
Why does my circular saw burn the wood?
A dull blade will make it hard to cut quickly, and the slower the feed rate of the saw, the more friction against the wood and the greater the likelihood of scorch marks. Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty.
How can I make my circular saw cut better?
Circular Saw Tips and Techniques
- Don’t set the blade too deep. …
- Set the blade depth before cutting. …
- Allow the cutoff to fall away freely. …
- Support plywood for cutting. …
- Don’t cut wood that’s supported on both ends. …
- Secure the board for rip cuts. …
- Hold the blade guard up to start angled cuts.
How do you cut wood with a circular saw without splintering?
There are exactly two ways to prevent splintering: increase the support between the fibers, or make the blade cut the fibers before it bends them.
How to Cut Plywood With a Circular Saw Without Splintering
- Use the Right Blade. …
- Use Tape. …
- Make a Zero Clearance Base. …
- Score the Cut Line. …
- Place the Best Side Down.
Can you rip a 2×4 with circular saw?
Quote from the video:
Quote from Youtube video: Note that you should only turn the circular saw off and you shouldn't pull it out of the 2×4. If you pull the circular saw out it might be too difficult to put it back again to resume the ripping.
