Why would my ice maker suddenly stopped making ice?

If your ice maker isn’t producing ice at all or is producing crescents or cubes that are smaller than usual, it’s typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it.

Why is my refrigerator dispensing water but not making ice?





The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice.

What to check if refrigerator stopped making ice?

Quote from the video:
Quote from Youtube video: So what happens is if it's clogged water just stops flowing to your fridge to your water dispenser to your ice maker. So to change that water filter.

What do you do if your refrigerator ice maker is not making ice?

Ice Maker Not Making Enough Ice

  1. Check your refrigerator and make sure it’s perfectly level.
  2. Check your ice maker unit and make sure it’s level.
  3. Check the water supply line for damage, pinching, or kinks.
  4. Check the fill cup; make sure it’s aligned correctly with the water funnel.


Where is the reset button on my ice maker?





You can find the reset button at the bottom of the ice maker. Remove the ice tray to locate it. Remove the ice tray. The red button you see is the reset button.

How do you troubleshoot an ice maker?

Ice Maker Troubleshooting Guide

  1. Check the shutoff arm.
  2. Check the supply valve.
  3. Inspect the water supply line.
  4. Test the shutoff switch.
  5. Check the freezer temperature.
  6. Inspect the ejector gear.
  7. Test the ejector motor.
  8. Test the ice mold heater.

How do I force my ice maker to cycle?

Quote from the video:
Quote from Youtube video: Go see the little notch at the bottom that's going to rotate 360 degrees all the way around. And it will run through the various stages.

Can water filter cause ice maker not to work?

While a clogged water filter could be the cause of your ice maker not working, there are more common causes. First, make sure that your icemaker is simply turned on and plugged in. Check the power cord and make sure it is plugged in. Take a look at the feeler arm or paddle to confirm it can move freely.

How do I unclog my ice maker water line?



Give the ice time to melt and then push it out when it’s turned into a slush. If you can feel no ice in the water supply line, this could be because of ice blocking a pipe inside the freezer itself. If this is the case, you can fix the problem by defrosting the freezer.

How do I test my ice maker water line?

Quote from the video:
Quote from Youtube video: The two metal probes together will zero out to test your Bell touch one probe to each terminal depending on the part your valve canary between 200 and 500 ohms.

Why did my Whirlpool refrigerator stop making ice?

A clogged water filter, kinked water line hose, or defective water inlet valve can restrict the water flowing to an ice maker. When this happens, ice production will be limited or completely stop.

How do I reset my refrigerator ice maker?



Turn The Ice Maker Off and On Again



This is a simple matter of resetting the power to your ice maker. By flipping the switch off and back on, you may be able to reset the functionality so that your ice maker begins to dispense ice again.

How do I reset my Frigidaire ice maker?

To be sure the control arm is the problem, do a full Frigidaire ice maker reset. Depending on your model, you can perform a hard reset on your ice maker using the control panel. Hold the on/off button until the LED is red. Wait a couple of minutes and then hold the same button until it’s green.