Can you relocate AC condenser?
A professional HVAC service company can assist you with easily moving the unit, even if you need this done more than once. Sometimes, during a remodel, renovation, or expansion, you may want to move the unit during construction and then relocate it again once the project is completed.
Can you relocate a split AC?
Move split system air conditioner
Now your air conditioning specialist can safely move your air conditioner and reinstall it in a new position in your home. After the split system has been moved the refrigerant can be pumped back into the unit.
Is it hard to move AC unit?
It must be remembered that moving your HVAC system is harder than you think. While it is easy to move most of the home appliances, the same cannot be said for an HVAC system. There are a number of moving parts that go along with the condenser. These include fragile cables, refrigerant, electrical lines, and more.
Where do refrigerant lines go?
Refrigerant lines are two copper lines that connect the outdoor air conditioner or heat pump to the indoor evaporator coil. The larger line typically carries a cool gas and is insulated. This is commonly referred to as the suction line, but it is also called the return line or vapor line.
How much does it cost to move a condenser?
Cost to Move Condenser (The Outside Unit)
The max price I’ve seen an HVAC website mention is $1,000 to move your AC.
How far should AC condenser be from house?
Air Conditioner Clearance by the Numbers
The general rule of thumb is to have at least one foot (or 12 inches) of clearance on each side of your air conditioner. Your air conditioner’s manufacturer may have specific clearance recommendations, but they’ll generally recommend between 12 and 24 inches.
How much does it cost to move an outside AC unit?
Typically, the cost of relocating an air conditioner runs around $1,000, but pricing varies depending on the specifics of the unit and the location.
How long is AC line set?
Maximum equivalent length of line set is: a. 250 feet for single stage units with scroll or reciprocating compressors. b. 150 feet for single stage units with rotary compressors.
How much does it cost to move an air handler?
Moving an air handler costs $1,500 to $3,000 and requires altering ductwork, moving the drain line, and running new electrical connections. Relocating an air handler may also require installing a new line set or reconfiguring a gas line.
Can AC unit be moved to attic?
Changing the location of an HVAC system component can be necessary and beneficial if: You want to improve your cooling efficiency by moving the A/C’s evaporator unit from your home’s unconditioned attic. You plan to add finished living space in your home’s basement, so you need to relocate the furnace and air handler.
How much does it cost to reroute ductwork?
Rerouting Ductwork: Materials and labor can cost you $35 to $55 per linear foot. The ductwork type, present and future location of ducts, and difficulty of moving them impact costs, while working in hard-to-reach areas increases costs as well.
Can air handler be moved to garage?
HVAC equipment and ductwork should not be located in the garage where it can act as a conduit for air movement between the garage and the house. In addition, any walls, ceiling cavities, and floor cavities separating the garage from livable space should be extensively air sealed.
Does the air handler have to be in the attic?
Most often, air handlers are located in the attic, basement or a dedicated closet, and may closely resemble the shape of a gas furnace. As its name suggests, an air handler “handles” the air inside your home and delivers warm or cool indoor air throughout your entire home.
Can you put HVAC in closet?
The heat that the furnace radiates may lead to a fire hazard. This is where ventilation become important — not the ventilation of the furnace itself, but the ventilation of the closet space. The heat can safely escape if there is space around the furnace. Do not install your furnace in a storage closet.
Can an air handler be installed in a closet?
If a full closet return (i.e., air handler on stand in closet) is unavoidable, seal all joints, seams, and edges of the closet air barrier (e.g., drywall, floor finish, sub-floor). Install an air barrier, if necessary, to enclose wall cavities and separate the closet from the attic.
Does an air handler need a vented door?
If your unit uses gas for heating, there is still a need for outside air. This is referred to as combustion air, and it should not come from indoor air. Thus, the need for a louvered door.
Is it better to put HVAC in attic?
Pro: Attic Installations Save Labor and Cost Less
One reason that attic air conditioners happen is because they’re cheaper and easier to install. It’s a lot simpler for your installer to leave ductwork loose, rather than having to cover it and wind it through floors and walls.
