Use a fine-toothed metal-cutting blade and don’t force it. They’ll zip off in under a minute. If you find that you can’t get your cut low enough, go as low as you can, then make two opposing vertical cuts down the center from the top. Whack the quarters outward with a heavy hammer so they’re below grade.
How do you remove a cemented clothesline?
Dig around the cement base with a shovel. If your pole doesn’t have a cement base, dig around the pole until you’re able to lean against the pole, working it loose. You can then remove the pole.
How do you get a metal pole out of concrete?
Use the Jack for Removing Steel Fence Posts
Put the end of the chain on the jack tongue and crank the jack. Keep a close eye on the chain to ensure that it doesn’t slip or move. Once you lift the pole and slab enough, you should have someone help you lift them out of the ground and carry them away.
How do you take down a metal pole?
Quote from the video:
Quote from Youtube video: Once you've got enough stuff dug up and you can drill some holes drill some holes. Again. Be safe if you've never drilled metal before it might very well be difficult.
How do you get a pole out of the ground?
Quote from the video:
Quote from Youtube video: Ah but you have to do with that chain wrap it around the post the grips the clothes.
How do you remove a metal fence post from a concrete slab?
Quote from the video:
Quote from Youtube video: So you know there's a few ways to go out you just dig at them for a little while that's it. And then the other thing you can do is you can just cut them off below the ground.
How do you remove a sleeve from a flag pole?
Quote from the video:
Quote from Youtube video: Raise it up out of the ground. And then we're gonna reset a new sleeve. And replant this flagpole just exactly the way it is now paulus prepared our whole use a 12 inch sonotube to make a pedestal.
How do you remove a metal post?
Quote from the video:
Quote from Youtube video: And then you use your weight to push back on this lever. And it slowly pulls the fenceless out of the ground once you make a little progress you move it down a little bit you only have a shot tape.
How do I remove a steel gate post from concrete?
Quote from the video:
Quote from Youtube video: Little air should do the trick. And next I'll go ahead and drill a 1/2 inch hole with my super awesome boss Bulldog hammer drill which goes through old concrete hard concrete just like butter.
How do you break concrete around a pole?
Break the concrete footing into two or more sections, using a cold chisel and steel mallet. Drive the tip of the chisel into the seam between the base of the post and top of the concrete until the concrete breaks. Repeat this on the opposite side of the post.
How do you remove a metal fence post spike?
Quote from the video:
Quote from Youtube video: Just take a little bit into the ground first and get it underneath this collar right here. Because. If you try and pull it right straight up it won't come you have to actually bend.
How do you remove a fence post without removing concrete?
The best way to replace a fence post without removing the concrete footing is by prying it out. You can do this with a long lever and fulcrum or a car jack. In either case, nail some wood to the post first to pry against and then get to work. Pry until the post releases from the concrete and comes all the way out.
How do you remove galvanized fence posts?
Quote from the video:
Quote from Youtube video: What you do is you'll dig down on one side of that pole and as you dig down on this one side just dig it down a little bit then you'll grab the pole. And just rock it back and forth back.
What can I do with old metal fence posts?
Quote from the video:
Quote from Youtube video: For or electric wire for just across fence. So I'll use them and if nothing else even the little pieces can be used for welding projects.
How do you pull out T posts?
Quote from the video:
Quote from Youtube video: Until it latches over the top of the remover tool and then i'm going to put my foot against the back of the removal tool one hand at the top of the t. Post. One hand kind of gripping.
How do you remove a metal chain link?
A small sharp bolt cutter or wire cutter works well for this. You don’t have to fully remove the ties. You can simply bend the wire ties back. Cutting the fence ties will result in lots of sharp metal points, so be sure to wear work gloves during your fence removal.
How do you remove a link without a chain tool?
Quote from the video:
Quote from Youtube video: And then what you'll have is you'll have a couple of little nubs. That are sticking out and you need to push those through the other side of the chain.
How hard is it to remove chain link fence?
Whether upgrading to a new fence or simply replacing your current one, removing a chain link fence is a relatively easy process – providing you take the right steps. That said, the task can be quite laborious, so make sure you get some help with the removal to make the job that bit easier.
