Can brass be threaded to copper?
To safely connect copper and galvanized steel, you have two options. Since brass doesn’t react with either the copper or the zinc, one method is to make sure you have a threaded female end on both the copper and the steel pipes, and then connect the two by simply inserting a short threaded brass nipple between them.
Jun 20, 2008
How do you fix brass thread?
Quote from the video:
Quote from Youtube video: And you can pull it off very easily that's because these threads have been tapered inward and there's not enough room for it to hold usually the easiest way to do this is to use a tapered mandrel.
How do I unscrew a copper pipe?
Ignite a plumber’s torch and move the flame evenly across each joint until the solder begins to loosen. At the same time, have your helper move the wrench back and forth as the solder loosens until the pipe pulls free from the joints.
How do you remove a stuck copper fitting?
Apply a penetrating lubricant such as Liquid Wrench or WD-40 to the fixture or nut and allow it to soak in for at least two hours. Apply more penetrating lubricant and allow it to soak in for another two hours. Turn the fixture or nut to loosen it.
How do you remove corroded brass nuts?
Heat the nut with a propane torch, taking care to avoid any adjacent flammable surfaces. The heat may expand it so that it will loosen. Tap the nut with a hammer to attempt to break the corrosion which is binding the nut.
Can you use copper olives on brass fittings?
Copper olives are soft and are universal, meaning they can be used with any type of material.
Will copper and brass cause galvanic corrosion?
Even runoff water from copper or brass surfaces can contain enough dissolved copper to cause rapid corrosion. If the use of copper or brass in contact with galvanized items is unavoidable, precautions should be taken to prevent electrical contact between the two metals.
Does brass and copper go together?
Hang a copper pendant light or bring in some vintage brass side tables to get the mix just right. If you are new to the idea of mixing metals, just keep in mind that metals like brass, gold and copper will warm a space and stainless finishes or chrome will cool it.
How do you remove brass ferrule from copper pipe?
Quote from the video:
Quote from Youtube video: So here we go just turn. It. I'm gonna do is I'm just going to keep turning it. Until it backs the compression nut and the curl off the copper.
Can you Unsweat a copper pipe?
Plumbers join copper pipe with a torch and soldering paste in a process called sweating pipe. The plumber applies the solder to the juncture of the pipe and fitting, making it watertight and permanent. To make repairs, it is sometimes necessary to take the joint apart. This process is known as unsweating pipe.
Can you Resweat copper pipe?
Quote from the video:
Quote from Youtube video: So put your new fitting. On and then we just need to solder just a brief guide on how to solder this pipe we're going to heat it from the bottom okay heat the joint up from the bottom.
How do you extract brass fittings?
Quote from the video:
Quote from Youtube video: It's that simple and simply to get these off you would go clockwise. And they'll loosen themselves and there you go guys.
How do you use an olive puller?
Quote from the video:
Quote from Youtube video: Nutt is over the ellipse of what we use here is an olive puller. This is a monument to o-360. It is 22. And 15 mill in the same unit. So it can do compressions at 22 and 15 millas name suggests.
How do you use a sleeve puller?
Quote from the video:
Quote from Youtube video: And then turn the handle in a clockwise motion. This carefully walks the compression ring off at the end of the water line as you can see it comes out very easily.
How do you remove a copper compression sleeve?
Quote from the video:
Quote from Youtube video: And place the forks of the puller behind the compression ring and nut. Next turn the puller handle clockwise until the compression ring and nutter pulled loose from the copper.
How do you remove old compression sleeves from a copper pipe?
Quote from the video:
Quote from Youtube video: On this one I did try to use the method of my channel locks unfortunately I'm gonna have to cut it using my hacksaw. If you have a dremel that would also be another preferred method it's much quicker.
How do brass compression sleeves work?
Quote from the video:
Quote from Youtube video: Once you tighten the actual compression knots up it actually squeezes out olive so the olive grips the pipe. And it also is forced into the fitting. Creating a watertight seal.
Is it OK to use Teflon tape on compression fittings?
PTFE tape can be used for compression fittings but not in the regular way that you are likely to see PTFE tape used in plumbing. In the case of a compression fitting, the PTFE tape is wrapped around the leading face of the olive to help create the watertight seal.
Do brass compression fittings need Teflon tape?
Quote from the video:
Quote from Youtube video: Place where people tend to use PTFE tip when it's not needed is on compression fittings compression fittings actually seal by compressing the olive. And that is the olive part there so that goes tight
