How do you remove a ground pole?
Quote from the video:
Quote from Youtube video: Ah but you have to do with that chain wrap it around the post the grips the clothes.
How do you get a metal pole out of concrete?
Use the Jack for Removing Steel Fence Posts
Put the end of the chain on the jack tongue and crank the jack. Keep a close eye on the chain to ensure that it doesn’t slip or move. Once you lift the pole and slab enough, you should have someone help you lift them out of the ground and carry them away.
How do you remove a power pole?
For removal, slide one end of the “U” shape tool between the flat contact tip and the housing spring. Twist or lift the contact up off the spring, and pull the contact by the wire back out the rear of the housing. For insertion, rest the “U” shape tip around the wire putting pressure on the back barrel of the contact.
How do you break concrete around a basketball pole?
The better long-term option is to dig the pole out from the ground. This is a labor-intensive task that involves digging 2.5 to 3 feet under the surface to pull the pole from the ground without leaving behind anything. Next, they’ll remove the concrete surrounding the pole with either a sledgehammer or jackhammer.
How do you remove concrete post base?
You can dig around the post hole, and then use several long pry bars to lever the concrete footing out of the ground. If the wood left inside the footing is not completely rotten, then you can sometimes screw a large eyebolt into the wood and then pull it out with a rope or chain.
How do you take the base off a basketball pole?
How to Remove a Basketball Pole: A Step by Step Guide
- Step 1: Check for buried utilities. …
- Step 2: Clear the area. …
- Step 3: Begin digging. …
- Step 4: Dig to the bottom of the pole. …
- Step 5: Rock the pole back and forth. …
- Step 6: Walk the pole down to the ground. …
- Step 7: (Optional) Remove the concrete.
How much does it cost to remove a basketball pole?
Book LoadUp, your nationwide hauling company for the best in basketball goal removal and disposal services near you. Our average basketball hoop removal cost starts at $95.
What do you do with old basketball poles?
You could use the pole to attach a dusk to dawn light fixture, if it is close to the drive way or front of the house. Or, you could use it to center a decorative fence along that side of your property, (this may involve cutting the pole down to size.
How do you break concrete blocks?
Sledgehammer is the best tool to use if the slab of concrete is three inches thick or less. Dig at the base of the slab to find the bottom.
Tool #1: Sledgehammer + Pry Bar
- Recruit a buddy to lift a corner with a pry bar. …
- Pry and pull out the broken chunks as they break apart.
- Don’t hit the same spot twice.
How do I remove concrete from my yard?
Steps for Removing a Concrete Slab
- Step 1: Create a Void Under the Concrete. The best way to speed up concrete removal is to create a void underneath the section of slab you’re working on. …
- Step 2: It’s Hammer Time. …
- Step 3: Pull Apart and Remove the Broken Concrete. …
- Step 4: Repeat Steps Until Concrete Is Demolished.
How do you break concrete by hand?
Instructions
- Dig Under the Concrete. Dig out the soil, gravel, or other material from under the concrete, using a shovel and a pickax or mattock. …
- Strike the Concrete. Lightly sprinkle the concrete with water to minimize dust. …
- Pry Off Stubborn Pieces. …
- Move the Concrete Chunks With a Hand Truck.
Which is the most suitable tool for breaking up concrete?
Jackhammer. If you have a massive slab of concrete that is thicker than a few inches, working with a jackhammer is your best bet. The tool can break up the material by using a high-powered pointed chisel. You can decide which type of jackhammer suits your application based on its abilities, availability and price.
How hard is it to remove concrete patio?
“Most concrete patios are un-reinforced, meaning that there is no rebar. So, in that case, a jackhammer is the best method to break the concrete into smaller pieces that can be shoveled away. If the area is very small, and the concrete is already cracked, a sledgehammer could also get the job done.”
Can a hammer drill break up concrete?
Hammer drills do not have a chiseling function and can be used to drill into a variety of materials. Rotary hammers use an electro-pneumatic hammer piston to generate high impact energy, which allows it to drill or demolish concrete.
How do you crush concrete into gravel?
Strike the slab with a sledge hammer about 12 inches from the point where the pickax touches the underside of the slab. Do this repeatedly, and after a short time the slab will break up into small pieces.
How do you crush old cement?
Quote from the video:
Quote from Youtube video: A traditional concrete crusher breaks right through the sand and gravel. The smart crusher on the other hand only crushes the cement stone leaving the sand and gravel undamaged.
Can you grind up concrete and reuse it?
You recycle the concrete. Recycling concrete consists of breaking, removing, and crushing concrete from an existing location, and then using it to create a new, reusable material.
