4 Answers
- Look what’s up there? …
- Cut a nice rectangular wallboard patch larger than the hole. …
- Remove plaster within the outline so patch can fit in snugly. …
- Install box.
- Cut opening in patch to allow sufficient access into box.
- Attach patch – now a rectangular frame – to ceiling structure.
- Apply joint compound and finish.
How do you patch a round hole in the ceiling?
Quote from the video:
Quote from Youtube video: So we'll take our piece of drywall.
How do you fix a hole in an old ceiling light fixture?
Quote from the video:
Quote from Youtube video: This is one of the pieces of drywall that I cut out of the ceiling to install the LED downlight II I'm gonna use this to make my patch.
Can you use old work box in ceiling?
Quote from the video:
Quote from Youtube video: And the way it works is unlike. The new work box which is attached directly to the stud. This is actually going to be hanging on the drywall.
How do you replace a old ceiling junction box?
Quote from the video:
Quote from Youtube video: You can also cut the hole manually with a jab saw I took the drywall circle out and put the new electrical sealing box in place.
How do you fill a circular hole in drywall?
Quote from the video:
Quote from Youtube video: It doesn't have to be perfect then you can flip your piece. Over. And take this piece right here. And hit it and if you cut it from the backside. All you're doing is cutting the paper and it pops off.
How do you drywall a round hole?
Open the drywall joint compound and mix thoroughly. Using the putty knife apply a generous amount of joint compound in the opening and on the surface around the opening. Ensure there’s plenty of compound on the inside of the opening, this will be filling the gap made by the hole saw blade kerf.
How do you cover an old electrical box in the ceiling?
If you leave the electrical box in place, you can choose a metal or vinyl cover plate large enough to hide the hole and screw it to the electrical box. If you remove the box, use a spring-loaded cover plate. This handy facade has an anchor that spans the opening and holds the plate tightly against the ceiling.
What is a goof ring?
A goof ring or trim ring is a thin, round or square piece of flat plastic that helps to cover gaps created by mis-cut holes in drywall ceiling applications. Installed by resting on top of the trim flange.
How do I fill a large hole in my ceiling?
Patch small and medium-sized holes with a mesh drywall patch or make a square patch out of a new piece of drywall to fill in larger holes. Either way, cover the patch up with 2 coats of spackling, sanding after each coat, then prime the patch with a water-based primer before painting over it.
How do you remove an old metal ceiling electrical box?
If it is a metal box, look for a single screw metal clamp in the top of the box. Loosen the screw and carefully pull the wires from the box. If the wires insert through a twin-screw clamp connector, loosen the two screws on the clamp and carefully pull the wires from the box.
How much weight can an old work ceiling box hold?
50 pounds
How heavy of a light fixture or ceiling fixture can a listed ceiling box support? A ceiling box can support a fixture of 50 pounds or less. A ceiling box rated for “fan support” can support a fan of 35 pounds or less.
How are ceiling junction boxes attached?
Most building codes require ceiling fans to be mounted on special fan-rated boxes, which are made of metal or strong plastic and have deep-threaded holes for the mounting screws. The box must be mounted firmly, either by attaching it directly to a framing member or by using a fan-rated brace.
How do you fix a loose junction box on a ceiling?
Quote from the video:
Quote from Youtube video: What this does is brace into the side feels loosen the screw here slide it out to brace into the studs. And then it's time out of the box.
Does a junction box have to be attached to a stud?
They don’t need to be fastened to a stud, so you can install them anywhere.
Can you put an outlet in a round box?
Depending in the screw holes on your box, you may also be able to fit a standard duplex receptacle and fit a wall plate designed for that purpose. These act as a wall plate and mounting bracket/adapter for mounting a standard receptacle in the round box.
How do you replace a ceiling electrical box?
Quote from the video:
Quote from Youtube video: Pull the cable out of the box. You can leave the box inside the cylinder. The new box will be supported by a ceiling fan brace. You can get one at any Home Center slip the brace into the ceiling.
How much weight can a ceiling electrical box hold?
All ceiling boxes are required to support at least 50 pounds (NEC 314.27(A)), so you can assume the box will be able to support a simple light fixture. Boxes that are designed to support ceiling fans must be labeled as such, and must have a label listing the weight it can support if over 35 pounds (NEC 314.27(D)).
