How to Repair the Drywall in the Bathroom Above the Shower/Bathtub

  1. Step 1: Remove Crumbling Drywall. …
  2. Step 2: Attach Furring Strips. …
  3. Step 3: Cut and Install Greenboard. …
  4. Step 4: Apply Joint Compound. …
  5. Step 5: Apply Additional Joint Compound. …
  6. Step 6: Prime the Patch. …
  7. Step 7: Apply Silicone Caulk. …
  8. Step 8: Dispose of Excess Drywall.

How do you fix water damaged drywall in a bathroom?

Follow these steps to do so:

  1. Step 1: Remove the tiles from the affected area. …
  2. Step 2: Remove the base or shoe trim. …
  3. Step 3: Locate the next closet stud. …
  4. Step 4: Cut out the damaged drywall. …
  5. Step 5: Replace rotted studs. …
  6. Step 6: Replace the removed drywall. …
  7. Step 7: Fill in screw holes and seams.

How do you repair drywall around a tub surround?






Quote from Youtube video: It when i applied joint tape to corners and joints it is time to start applying drywall compound for this job i am using premixed joint compound that you can find in laws for home depot.

How do you replace a drywall section in a bathroom?

Quote from the video:
Quote from Youtube video: After your drywall is in place go ahead and attach it with screws. You want to make sure you go ahead and hit the top side where you cut those out that way this drywall isn't loose in here.

Can water damaged drywall be repaired?

If drywall panels only show water stains but aren’t structurally compromised, they may be repairable by cutting out the damaged portion. When cutting out around the damaged area, use a keyhole saw to cut the hole into a square or rectangular shape. You can then make a patch with another piece of drywall for the repair.

How do you fix water damaged drywall next to tub?

Quote from the video:
Quote from Youtube video: If you have a tub surround like this one near the kerdi-band is pretty well adhere to the latex paint in the part of the drywall that was damaged. Yeah it's in good shape.

How do I repair drywall next to shower?





How to Repair the Drywall in the Bathroom Above the Shower/…

  1. Step 1: Remove Crumbling Drywall. …
  2. Step 2: Attach Furring Strips. …
  3. Step 3: Cut and Install Greenboard. …
  4. Step 4: Apply Joint Compound. …
  5. Step 5: Apply Additional Joint Compound. …
  6. Step 6: Prime the Patch. …
  7. Step 7: Apply Silicone Caulk. …
  8. Step 8: Dispose of Excess Drywall.


Is there a special drywall mud for bathrooms?

Green. Green drywall is a type of drywall that’s mold resistant and is used in applications where moisture can be an issue—so most commonly, bathrooms. To maximize the mold resistance, use mold-resistant drywall mud, aka joint compound. Green drywall generally costs about 20% more than regular drywall.

How do you fix rotted drywall?

Quote from the video:
Quote from Youtube video: Board. Using a hammer we start to break away the damaged wall. Once the wall is exposed we turn the water back on and wait a few hours to see if anything is leaking.

How do you repair drywall next to tile?



Quote from the video:
Quote from Youtube video: You also want to make sure you pre-fill the seams. And then apply the mesh tape over that this is just going to help reinforce. The patch.

Can I tile over damaged drywall?

Yes, you should definitely repair the drywall before tiling to ensure the integrity of the new wall. You’re more than likely to find cracks, divots, or even holes in the drywall. If you choose to apply the new tiles on top of that damaged wall, you are going to find cracked or loose tiles in a matter of months!

Can you put backsplash over damaged drywall?

Typically, no, if you’re using a mortar-based mastic. Proper adhesion depends on the mastic drying in a controlled, relatively slow fashion. Drywall with torn paper is more permeable, and mastic dry times will be inconsistent.

How do you fill the gap between shower surround and drywall?



Quote from the video:
Quote from Youtube video: Everything needs something to bond to mix up some 20-minute speed set joint compound. And press it into the gap keeping it flush with the drywall.

How do you seal a large gap between a wall and a bath?

Quote from the video:
Quote from Youtube video: And cut a very small angle about an eighth of an inch off the top. You're going to cut it at about a 45 degree angle. Now taking your caulking gun go ahead and load up your caulk.

Is it better to caulk or grout around tub?

Since you are joining two different materials together, you should use caulk in the space where the floor tile and tub meet. Grout is not flexible, so it’s not the best material for the job, while caulk allows for movement and also provides a better sealant.