Do both 3-way switches need to be smart?
It is not necessary to replace both 3-way switches with smart switches. You can use a standard 3-way switch for one of them, BUT there is a caveat. The SMART 3-way switch MUST be the MAIN SWITCH; i.e., the one that connects to the line/live wire from the fuse/breaker box.
Does GE smart switch need a neutral wire?
The Smart Switch connects directly with Google Home and Amazon Alexa devices without a hub required. Works with most common residential wiring– no neutral wire required.
Can I replace a 3-way switch with a single pole?
To convert a 3-way switch to single pole, one of the traveler wires is removed from the switch. In order for a 3-way switch to function as a single pole, the wires need to be connected to the common and one of the traveler terminals. It will not work if the wires are connected to the two traveler terminals.
How do I wire a GE smart switch?
Quote from the video:
Quote from Youtube video: So as long as you have one connected to the load wire. And one connected to the line wire or hot wire you are good to go and then we've got our green ground wire over here.
Can you make a 3 way switch with 2 wires?
Question: Can I use a 3-way switch with just two wires? Answer: No. There must be three wires between the two switches. You CAN use the switch with only two wires, but it will act as a regular switch, not a three-way switch.
How can I tell which wire is common on a 3 way switch?
Quote from the video:
Quote from Youtube video: And take a tester and see which one of the black wires is a live wire. So this is our live wire this is going to be our common terminal. Now if you try both of these black wires.
How does the C by GE work without a neutral wire?
To work in junction boxes without neutral wiring, C by GE’s new hubless smart switches and dimmers have been designed to “steal” energy from the wire that goes through the switch.
Does C by GE need a hub?
A: There is no Hub or bridge required. I set mine up using the C by GE App. However if you use the GE App you are limited to Bluetooth short range control. If you want to control these bulbs while away from home you will need a Amazon or Google device that can act as a hub.
How does C by GE switch work?
Quote from the video:
Quote from Youtube video: And as you can see with a little blue light indicator. Every one of my button pushes is seamlessly synced to the c by ge bulb and the lamp.
Why is my C by GE switch red?
If enabled, the Light Ring or LED status indicator will turn red if the switch loses it’s Wi-Fi connection.
Does C by GE work with SmartThings?
The GE zigbee light bulbs will work with the Smartthings hub. The Bluetooth ones are also smart bulbs, but they will not work with SmartThings. Unfortunately, the C life bulbs are Bluetooth.
How do I connect my Z-Wave switch?
Quote from the video:
Quote from Youtube video: You just push the paddle on the top.
How do I program a GE Z-Wave switch?
Quote from the video:
Quote from Youtube video: Things application to add this as a thing and smart thing. So first we need to just go into this marking gap click add a stain here.
How do I reset my GE Smart switch C?
1 Reset Your C by GE Smart Switch
Press and hold your switch’s button, toggle, or paddle for 10 seconds. If the reset is successful, the indicator light will begin blinking blue meaning the switch is ready to be set up again. Now that the switch has been reset, it is ready to attempt the update process again.
Does GE Z-Wave work with SmartThings?
Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris.
How do I pair GE Z-wave to SmartThings?
Integrating Z-Wave Smart Switch With SmartThings Hub
- Ensure the device is in pairing mode.
- Go to the Things section of the SmartThings app and select Add a Thing.
- SmartThings will now search for new devices. Be patient! This may take some time.
How do I add Z-wave light switch to SmartThings?
How to add generic Z-Wave devices to SmartThings
- Click the plus button and select ‘device’.
- Select the brand ‘Z-Wave’.
- Click ‘Generic Z-Wave Device’.
- Click ‘Start’.
- Follow your devices inclusion procedure.
- Name your device and click ‘Done’.
How do you reset a GE Z-wave toggle switch?
Quote from the video:
Quote from Youtube video: There we go. And okay so I use the screwdriver to pop the tab out it's stuck in the out position and then you pop it back in and you hit the on switch ten times.
How do I get my GE smart switch into pairing mode?
Make sure Bluetooth is enabled on your phone or tablet and you are within 40 feet of the C by GE smart light switch.
- Launch the C by GE app on your phone or tablet.
- Tap Add in the top right corner.
- Then tap Add New Devices.
- Select C-Start Switches.
- You’ll be shown a summary of the setup process.
How do I uninstall Z-Wave switch?
Exclude/unpair from the device.
- Open SmartThings App.
- Find the device that you want to unpair/disconnect from your hub.
- Select the 3 dots icon located at the top right corner.
- Tap Edit.
- Tap Delete.
- Ensure that the LED on Smart Home Hub is blinking.
- Tap the button on the Z-Wave device that you want to factory reset.
