How do you change a seat occupancy sensor?
Quote from the video:
Quote from Youtube video: So plastic trims are got to come off. From all four sides. And that's the next step you'll see this some seat belt is also attached we have to get the plastic trim off in order to disconnect.
How do you test a seat occupancy sensor?
Quote from the video:
Quote from Youtube video: Okay if we get off the seat. It's going to take a little bit of time it says unoccupied let's sit back on the seat. Okay we need to give it a little bit of time it just occupied.
Where is the seat occupancy sensor located?
The seat occupancy sensor is placed above the seat foam and under the seat cover. When the sensor connector is connected to the vehicle data recorder it sounds an alarm that occupants are seated but not belted in.
How much does it cost to fix a passenger airbag sensor?
The average cost for air bag crash sensor replacement is between $429 and $446. Labor costs are estimated between $65 and $81 while parts are priced at $365. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.
How does a seat occupancy sensor work?
A vehicle’s passenger occupancy sensor detects whether a passenger is in the seat and decides whether or not to allow the airbag to deploy in the event of an accident. If the sensor determines a weight on the seat is not a person, the airbag does not deploy.
How much weight turns on the passenger airbag?
about 65 lbs
Passenger airbag off indicator
This occurs when the front passenger’s weight sensors detect about 65 lbs (29 kg) or less, the weight of an infant or small child, on the seat. Infants and small children should always ride properly restrained in a back seat.
How do you change a passenger airbag sensor?
Quote from the video:
Quote from Youtube video: So it's under the seat guys it usually has to be clipped okay right here. But ours came loose. So just pull it out it has two clips. Usually okay and this is the location.
What is code B00A0?
Code B00A0 stands for Occupant Classification System (OCS). Children and small passengers can be injured during airbag deployment. The occupant classification system (OCS) is designed to prevent this from happening.
How do you calibrate a passenger seat?
Quote from the video:
Quote from Youtube video: Check that there are no items beneath the seat that may restrict or interfere with movement. Select start calibration select start to begin zero-point setting.
Is it OK to drive with airbag light on?
The bottom line is that, when your airbag light comes on, it’s vital that you don’t drive any further and have your car checked by a mechanic as soon as possible. Until the problem is diagnosed and fixed, your airbags will not deploy.
Do airbag sensors need to be replaced?
Any crash sensor which may have sustained any type of damage, as a result of an accident, should be replaced. Having the airbags deployed during an accident will obviously mean the airbags need to be replaced.
How do you fix airbag sensor?
Quote from the video:
Quote from Youtube video: And I just wiggled him real good and pushed the back into each other. And I got back into the car. Started back up and the light went off so I know this was the problem it was just a loose connection.
How much does it cost to fix the airbag light?
Number 1 — Reset Airbag Light
This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600.
How do you reset an airbag sensor?
First, turn the ignition switch on. Next, wait for the airbag light to turn on – it normally stays lit for seven seconds before shutting itself off. Then, immediately turn off the ignition switch, and wait three seconds. Repeat the initial steps once or twice before starting the engine.
Can a blown fuse cause the airbag light to come on?
One fuse in particular, fuse #13 is a likely culprit. If your airbag light is on and your rear windshield wiper doesn’t work, then it’s a pretty good indication that you need to change fuse #13 and possibly others. Blown fuses can definitely cause the airbag light to come on.
Does removing the airbag fuse turn off the light?
That means that removing the fuse for the airbag light may actually disable the light. But we do not recommend that you do so because of the fact that you wouldn’t be able to tell whether or not your airbags are working properly without the airbag light on your dashboard.
What happens if you remove the airbag fuse?
In most cases, removing an airbag fuse does not disable the airbag. This especially happens if the airbag deploys even when the power that drives it is cut off. You may have to figure out another way to disable the airbag.
Can airbag light reset itself?
Luckily, in many car models, the airbag light will also go away by itself if you have repaired the problem. In some older cars, though, it is possible to reset the airbag light without a scanner by removing the car battery terminals.
Where are the airbag sensors located?
Quote from the video:
Quote from Youtube video: Here okay check it out right under the fender in the corner. That's phone cash airbag sensor.
How can I bypass the airbag light?
Quote from the video:
Quote from Youtube video: Start the truck the airbag light will glow solid at first and then it should go. Away. If you pull the resistor the airbag light should start blinking. Again.
