Can you use flexible pipe for sink drain?
Flexible drain parts can be used to quickly connect offset sink drains. If you have ever been a little short on pipe or had drain trap fittings that were just shy of the necessary length or angle, you’ll appreciate the usefulness of flexible drain parts.
Should I use a flexible P trap?
P-traps take on and maintain the shape of a letter p to keep sewer gases out of your house. When you use a flexible p trap, you’re more likely to get the shape wrong, and you’re more likely to accidentally misshape it when you bump the pipe. Or when you bump it, the force might cause it to spring a leak.
Are sink traps universal?
When replacing a pP-trap, you should use the same type of trap you remove. Traps are made from polypropylene (white or black), ABS (black), PVC (white) or brass (either chrome-plated or natural colored). Traps come in 1-1/4 inch (standard bathroom sink) or 1-1/2 inch (standard kitchen sink) inside diameter sizes.
How do you replace a trap under a sink?
Quote from the video:
Quote from Youtube video: You can replace it fairly easily. Here's what you'll need to begin remove the old drain assembly from the top down. Use your pliers to unscrew any stubborn slip nuts.
Are flexible drain pipes any good?
Problems with flexible drain pipe
The major problem with them is that they collect the dirt and grime that’s supposed to flow down the drain. The zigzag sides are great for slowing down the flow of water and letting the gunk sit and collect.
Are flexible waste pipes good?
Having to use a flexible waste is just poor plumbing design. In MOST cases. I have had to use a couple recently. The first was to get a bathroom basin waste back a very short distance – joints would not have done it and I have kept it near vertical so very little will catch in the folds.
Is Metal P-trap better than plastic?
The main advantage of metal drains is that metal is more resistant to heat than plastic is, even ABS plastic. That’s why metal drains are more commonly used for kitchen drains and strainers. That’s not as much of an issue with bathroom drains that don’t deal with such hot water and certainly not in the same amounts.
Which fittings are not approved for drainage?
No double hub fitting, single or double tee branch, single or double tapped tee branch, side inlet quarter bend, running thread, band, or saddle shall be used as a drainage fitting, except that a double hub sanitary tapped tee shall be permitted to be used on a vertical line as a fixture connection.
What if new kitchen sink drain doesn’t line up with existing pipes?
In general, if the P-trap doesn’t line up with the drain, you can adjust the length and height of your drainpipes by cutting them or simply slipping them in and out of their fittings.
What is a trap adapter?
PVC Threaded Trap Adapter to connect your sink drainage to the drain pipe that extends through the wall or floor. Designed to fit most tubular drain applications, this universal adapter is constructed from PVC plastic. Features slip joint inlet and 1-1/2 in. Schedule 40 solvent weld outlet.
What are the types of traps in plumbing?
In brief, there are different types of traps in Plumbing: Floor Trap or Nahni Trap, Gully Trap, P Trap, Q Trap, S Trap, Intercepting Trap, Bottle Trap, Grease Trap.
How do you replace a metal sink trap?
Quote from the video:
Quote from Youtube video: In this case if we were to screw a plastic washer onto this that sharp metal can cut into it so it's always good to go metal to metal plastic to plastic. I'm going to put the wall tube in first.
Can you replace a metal P-trap with a plastic one?
Take the drain assembly apart and separate it into its components so that you can replace each one with an identical plastic component. Besides the P-trap, there may be extensions and fittings, depending on the configuration of the sink in relation to the waste stub-out.
Can you replace chrome P-trap with PVC?
Remove a leaky chrome kitchen waste line and replace it with a plastic PVC waste line and trap. It’s time to get rid of that drip-catching bucket under your kitchen sink. Whether your pipes need total replacement or just tightening, here’s how to put an end to the leaks.
What is the difference between AP trap and S trap?
The only difference between a P-trap and an S-trap is the horizontal length of pipe on the outflow side which allows you to connect the vent. You can turn an S-trap into a P-trap by adding this pipe — it should be at least 4 inches long — and connecting a vent to it.
How do you convert s trap to P trap?
Quote from the video:
Quote from Youtube video: And proceed to take your s strap. Off. Move the bowl to the side take the other half of your ex trap. Off take your p-trap. And tighten the top take your elbow. And place it on the end.
Why are S traps not allowed?
The “S” trap is prohibited under the Uniform Plumbing Code throughout the United States. This is because the “S” trap will siphon or suck water out from the trap which will end up releasing methane (sewer) gases into the home. So, it is a code violation and if you are doing remodeling, you will have to replace it.
What does the P in P trap stand for?
Quote from the video:
Quote from Youtube video: Key traps are named after their shape. They use a small bend in the pipe to drop water creating a seal this trap seal prevents sewer gases and odors from leaking into your home.
Does water sit in P-trap?
Water sits inside the P-trap, and prevents the sewer gas from leaking into the home. Water evaporates with time. When the water in the P-trap evaporates, sewer gas can leak straight into your home.
When should I replace my P-trap?
It is required by plumbing code and is often part of installing a new sink since an old trap assembly doesn’t always fit the new sink configuration. When parts of a trap corrode or the joints begin to leak and can’t be fixed by tightening the connecting nuts, it’s time to replace the entire trap assembly.
