How do you wire two light fixtures to the same switch?

You can do this light switch wiring in one of two ways. The most common is to daisy-chain the light fixtures by connecting them to each other and hooking the first one up to the switch. The other way to wire multiple lights to one switch is to connect all of them directly to the switch in a “home run” configuration.

Can I run 2 lights from one switch?

The answer is yes; one switch can turn on multiple lights. You can use two ways to make your switch control multiple lights. The most common way is to daisy-chain the light fixtures through connecting them with each other and hooking the first fixture to the switch.

How do I separate multiple lights on one switch?

3 Answers

  1. Get a 2-gang box to replace your existing 1-gang box.
  2. Get a new switch.
  3. Remove your existing box and install the 2-gang box in its place.
  4. Run your supply hot wire to both switches.
  5. Connect the light/fan hot wire to one switch and the exterior light to the other.
  6. Join all neutrals and ground wires.

How do you split two light fixtures?

You can usually install a light fixture between an existing one and the switch by cutting the cable to the existing fixture at the location of the new one, inserting the ends of the cable into the electrical box for the new fixture and pigtailing the new fixture onto these wires.

How do you connect two lights to two switches from one power source?

Run 12-gauge electrical cable between each switch and the light it controls. Pull one end of each cable through the back of one of the light fixture electrical boxes. Strip both ends of each cable with a knife, separate the wires and remove 1/2 inch of insulation from the end of each.

How do I connect two lights to one power source?

Quote from the video:
Quote from Youtube video: So all you really have to do is run another wire from the other octagon box where the other light will be so that will be a 14 to again. And you're going to have a black and white wire in each one.

Can you daisy-chain light switches?

Daisy chaining is a simple way to connect two or more light fixtures. Multiple light fixtures operated by a single switch can be most easily wired through a process known as “daisy chaining.” This is a simple, serial wiring scheme that connects the wires of the light fixtures one to the next in a single circuit.

What is daisy-chain wiring?

In electrical and electronic engineering, a daisy chain is a wiring scheme in which multiple devices are wired together in sequence or in a ring, similar to a garland of daisy flowers.

How many lights can you string together?

In this case, most traditional incandescent Christmas mini lights only allow you to connect 4 or 5 sets end to end but with many LED mini light strings you can connect 40 to 50+ together depending on the light count. Consider your circuits: Most household circuits are 15 or 20 amps.

How do I add a second light switch to an existing light?

Quote from the video:
Quote from Youtube video: Now i can connect the switches to the hots i put my red switch feed which was the old switch leg out to the old light slide that into the switch. And take my new hot wire.

How do you install a second light fixture?

Quote from the video:
Quote from Youtube video: You'll want to just cut off the copper and start again it's always best practice to do that sometimes the cable is new enough that you can manipulate the cores again without them breaking on you.

How do you install two light vanity fixtures?

  1. Take Measurements. Before you dive into the project, measure for the size of your new vanity light fixture. …
  2. Disconnect the Power. …
  3. Remove the Existing Fixture. …
  4. Disconnect the Wiring. …
  5. Prepare the Area. …
  6. Install the New Mounting Plate. …
  7. Connect the Wiring. …
  8. Attach the New Light Fixture.
  9. How do you change a bathroom light switch?

    Changing a Single-Pole Light Switch

    1. Turn off the power to the light switch at the main circuit breaker box. …
    2. Remove the old wall plate by unscrewing it. …
    3. Disconnect the old switch by removing the screws. …
    4. Attach the new wires to the new switch in the same configuration as you removed them.

    Can I change a bathroom light fitting?

    Yes! It’s legal. Part P relates to notifiable work, which is certain types of work (new circuits, for example) or work in ‘special locations’ (eg a bathroom). However, you do need to comply with wiring regulations, and need to be confident you know what you’re doing.

    How do you wire vanity lights together?

    Quote from the video:
    Quote from Youtube video: The vanity light wires can now be connected. Simply match the white wires twist them together and add a wire nut. The white wires are also called the neutral wires do the same with the black wires.

    How do you wire a bathroom light fixture?

    Quote from the video:
    Quote from Youtube video: Next you can start removing the wire nuts that are connecting the light fixture to the house power wires. The wire nuts are just those little plastic combs that connect on the wires.

    Do vanity lights need a junction box?

    You can’t install a light fixture without a junction box, but the fact that there’s no box at the spot where you want to install the light doesn’t mean you can’t install the light.

    Can I use an outlet as a junction box?

    Yes. For code-compliance purposes: Each 14 gauge wire is 2 cubic inches, each 12 gauge 2.25. All of the ground wires count as a largest wire.

    Is junction box necessary?

    You’ll need a junction box if you can’t make the connections inside an existing electrical box. You should install the box with the opening facing out from the wall so all the wires inside are accessible. Like any electrical box, it should be installed so that the edge of the opening is flush with the wall.