Why is my Bosch dishwasher not latching?

An obvious reason that your dishwasher is not staying latched is because it has a broken Bosch dishwasher door latch, which you can replace with a manufacturer-approved latch. On the flip side, a Bosch dishwasher latch stuck closed may also mean the latch is broken and needs replacement.

How do you fix a dishwasher that won’t latch?





On most dishwashers, you can access the hinges by removing the dishwasher frame or top and side panels. If the hinges are loose, tighten them so that the latch lines up and closes. If that doesn’t work, they should be replaced.

How do you reset a door latch on a Bosch dishwasher?

On many modern Bosch dishwashers, the Reset button is the Start button, this can confuse some customers. To reset the modern Bosch dishwasher, press and hold the start button for about 3 to 5 seconds.

How do you open the back of a Bosch dishwasher?


Quote from Youtube video: Pull off the insulation blanket. And side cover now carefully tilt the dishwasher back so its rear panel rests on a blanket or carpet detach the fill hose from its retaining clip.

How do I know if my dishwasher latch is broken?

It is a simple matter to determine whether the door latch is the problem. Simply open the door, close the latch and select a cycle and depress the switch. Note that if the test is successful, with the door open, the dishwasher will operate and water may spray out.

How do I know if my dishwasher door latch is bad?





You can generally tell if it is a hinge problem by pushing down firmly (not hard) on the dishwasher door. Sturdy hinges won’t allow it to move. Old or rusty hinges will allow some wiggle room and they need to be replaced.

Why is my dishwasher door not locking?

A dishwasher door will not close properly if the plastic tub misaligned or is not installed correctly, or if the door latch has malfunctioned. You’ll face the same problem if the top or bottom racks inside aren’t set correctly or if the door striker is misaligned.

What causes a door not to latch?

When a door doesn’t latch properly, it’s usually because the door has sagged in the opening, making it so the strike doesn’t line up with the hole in the jamb of the door, called the strike plate mortise.

How does a dishwasher latch work?

Door Latch Assembly



Your dishwasher is designed to start only once the door latch at the top of the tub is closed. When the latch closes properly, the latch switches set the dishwasher controls in motion to start the machine.

How do I unclog my Bosch dishwasher?



Quote from the video:
Quote from Youtube video: For cover by the lug and pull it upwards until it resists. Then pull forwards you can check your instruction manual for full guidance. Check the pump and remove any foreign objects.

Which Bosch dishwashers are recalled?

Recall Details

Brand Model number beginning with Serial number range
Bosch SHE33T SHE53T SHE65T SHE68T SHE7PT SHE8PT FD 9209 – 9403
SGE53U SGE63E* SGE68U SGV63E* SGX68U FD 9401 – 9501
Gaggenau DF2417* FD 9401 – 9501
Jenn-Air JDB9600CWS FD 9404 – 9501

How do I clean my Bosch dishwasher pump?

How to clean your dishwasher pump

  1. First, remove the filter and wash it under water with soap and a soft brush. Review your owner’s manual to learn how to remove it.
  2. Next, remove the pump cover, which is located under the filter. …
  3. Then check the pump and remove any debris and standing water with a sponge.



How often does a Bosch dishwasher filter need to be cleaned?

Dishwasher Filter Cleaning Frequency



It’s recommended that you thoroughly clean Bosch dishwasher parts at least every four months. However, if you use your dishwasher every single day and don’t do anything besides pre-scraping the dishes before loading them, you may need to stick to a monthly filter cleaning schedule.

Where is the filter in a Bosch dishwasher?

Ensure your dishwasher drains properly by periodically cleaning the filter in your dishwasher.

  1. Remove the bottom rack completely and set aside.
  2. The filter is located at the bottom of the dishwasher tub. …
  3. Wash the filter with warm, soapy water and a scrub brush.

Can a dishwasher circulation pump get clogged?

Repair the dishwasher upper circulation pump assembly



A clog, a foreign object or a failed seal can prevent the water from flowing to the spray arms. A clog or failed check valve can prevent the dishwasher from draining.

Is it worth fixing a dishwasher pump?



A dishwasher may not be worth repairing depending on what the problem is. If the dishwasher needs something simple but important, such as a door latch or seal, soap dispenser, pressure switch, drain pump or fill valve, repair may be worth it.

How do you test a dishwasher pump?

Set your multimeter to the R x 1 setting. Touch each of the meter’s probes to one terminal each. Your motor should show little resistance (a reading of zero, or close to zero). Now check the ground connection.

How do you test a dishwasher water pump?

Locate and remove your dishwasher pump. It likely will be found behind the lower access panel. Once you have removed it, using a multimeter on Rx1 mode, touch the pump’s terminals with the probes. You are testing for continuity and should receive a reading of zero or nearly zero.

How do you test a Bosch dishwasher drain pump?

Quote from the video:
Quote from Youtube video: But before you do that let's just check this let's just pull this this float lift it up if you just hold it up for a few seconds. It causes the dishwasher to activate the drain pump.

How do I know if my dishwasher drain pump is clogged?



Disconnect the hose from the pump (if you’re unsure where it is or how to disconnect it, consult your owner’s manual). To check the hose for clogs, simply blow through it. If air won’t pass through, you’ve got a clog.