Step-By-Step Instructions:
- Dig the post hole, making it three times the width of the post and at a depth equal to 1/3 to 1⁄2 of the above-ground length of the post, plus 6″ (right). …
- Pour 6″ of gravel or crushed stone into the bottom of the hole. …
- Set the post in the hole.
How many bags of concrete do I need for a 6×6 post?
How Much Concrete For A 6×6 Fence Post?
| Depth | 50 Lb Bags |
|---|---|
| 18″-21″ | 6 |
| 22″-25″ | 7 |
| 26″-28″ | 8 |
| 28″-30″ | 9 |
How deep should 6×6 post be?
three feet
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.
What diameter hole do you need for a 6×6 post?
10″-diameter
A 6×6 post requires a 10″-diameter hole. Shovel a 6″ layer of gravel into the hole to provide drainage.
How do you set a 6×6 post by yourself?
Quote from Youtube video: Get it plum and then if you go around and you tap it down in there you should be alright. And when I take I Drive me a steak. Keep that put screw in it. You can see actually right here.
Can you put dry concrete in a post hole?
Quote from the video:
Quote from Youtube video: Because there is no mixing you simply pour it into the hole. Dry. Then add water when digging your post hole it is important that the diameter of the hole be three times the width of the post.
How much water do you put in a 50 pound bag of quikrete?
about 1 gallon
Pour water into the dry mix until the powder is saturated with water. Depending on soil conditions, this will require about 1 gallon (3.8 L) of water per 50 lb (22.7 kg) bag.
