If the pipe is below the basement floor level you would not need a pump, as gravity flow downhill from there would carry water away, and it would all be perforated.

Should I use perforated pipe for drainage?

Perforated pipes are frequently used for such drainage systems due to their ability to absorb and drain excess water. Some homeowners install perforated pipes in the ground to collect rain water and use it to irrigate their plants.

Should I use perforated corrugated pipe for drainage?






Quote from Youtube video: Remember that perforated pipe is used two ways. One. If you had if you wanted to drain an area into a dry well the water would come down the pipe.

Why is drainage pipe perforated?

Both land drain and twinwall are available with or without perforations, and these perforations are what allows the water to enter the pipe and drain the ground surrounding the pipe. If you choose a perforated pipe for your project you are likely looking to drain surface water from soil or grassy area.

Should drainage pipe holes up or down?

Quote from the video:
Quote from Youtube video: Here is our perforated pipe and you can see this one has holes in it. Always remember that holes point down in any gravel system there is no way that that water is going to drop into this holes from

How deep should perforated pipe?

Installing a Perforated Drain Pipe. 1. Dig a trench that is about twice the width of the drainage pipe. In addition, make sure that you dig at least two-feet deep.

Do I need gravel for solid drain pipe?





In this system, the pipe is solid, and not perforated, so there’s no need to provide gravel for drainage along the length of the drainpipe. One advantage of a smooth-wall pipe is that it will drain water quickly, and if it gets clogged, you can use a drain snake to clean it out.

How deep can you bury corrugated drain pipe?

The trench should be 24 inches deep and 6 inches wide. To give the trench some downward slope, dig the far end lower than the end closest to the building. You can rent a laser level from a home improvement store to check the height and ensure that the slope is in place before you fill the trench in.

What is the difference between corrugated and perforated pipe?

Solid or Perforated corrugated pipe is available. The piece of drain tubing is sometimes referred to as a scuplture. Perforated pipes are used for drainage. A variation of single wall corrugated pipe is coextruded dual wall corrugated pipe.

How do you bury a perforated drain pipe?

Quote from the video:
Quote from Youtube video: So we've got our trench we're going to put some gravel at the bottom a good base next go ahead and spread that gravel. So the pipe can set level in the trench.

How far apart are the holes in perforated pipe?



IMPERIAL Perforations shall consist of 2 rows of 1/2″ (12.7mm) holes positioned at 120° radially on the pipe. Spacing between holes shall be 5″ (125mm).

How do you install a perforated drain?

Quote from the video:
Quote from Youtube video: The first step is to excavate a trench from the inlet to the outlet point. The outlet for your project might be any of the following options a culvert tap in the existing drainage a retention pond or

How do you install a perforated land drain pipe?

Quote from the video:
Quote from Youtube video: Where. It will run down the pipe and away to a soak away or filter through to some more coarse Brown. The trench is dug the drain is laid in it.

How can I make my land drain better?



Build a creek bed to direct water away from a low spot in your yard. Or if the slope of the ground permits it, use a creek bed to drain a low spot. Start by making a swale-essentially a gentle, shallow drainage ditch. Then line it with gravel or stones and add interest with boulders, a bridge or plantings.

Is gravel good for drainage?

Gravel Beds Provide Natural Drainage



Gravel naturally has great draining capabilities which help to stop the accumulation of unwanted water and prevent any plants from being drowned during periods of heavy rain.

Do land drains work in clay?

Land drains, commonly known as perforated drain pipes, are used in domestic, commercial, agricultural and industrial areas to stop the ground from being waterlogged. The ground can be waterlogged due to excess water and rainfall or due to impermeable types of soil such as clay.

What is the difference between a land drain and a French drain?

Essentially, they are all the same thing. However, French drain more typically refers to the process of removing the surface water by installing a trench and backfilling with gravel. Before there was such a thing as a land drain pipe, this method was called a French drain – without a pipe.

How do perforated land drains work?



Perforated land drain is used to collect water through the small holes located around the pipe; these holes allow water to seep from the ground into the pipe and be carried away or to percolate back into the soil at a practical rate.

What is a French drain system?

A French drain is a trench filled with a perforated pipe and gravel that allows water to drain naturally from your yard. Depending on the size of your yard and the scale of your drainage issue, you can purchase the pipes and equipment to create a French drain yourself.

What is the difference between a French drain and a trench drain?

Aside from what we’ve listed here, the difference between a French drain and a trench drain is that a French drain is used for water that is underground while a trench drain diverts excess water from a surface.

Why do French drains fail?

Over time, a French drain may become clogged. Tiny soil and clay granules slip through the pores of the landscape fabric and gradually build up inside the pipe. Another common cause of French drain clogs is root intrusion from grass, shrubs, and trees.