Can you replace a light switch with a switch outlet combo?
Quote from the video:
Quote from Youtube video: And take those screws. Out. After your light switch cover is off go ahead and grab your drill or screwdriver and remove the switch. Then we're going to pull it out from the wall.
Can you turn a light switch into a receptacle?
Yes, a switch can be converted into an outlet if the wiring can be identified back at the source and one of the wires (the neutral or white) can be connected to the neutral source.
Can you mix lights and outlets on the same circuit?
In your case it is okay to install a receptacle alongside the switch. However you need a neutral as well as a hot wire which you may not have. Test to see if you have a neutral with a test light or meter. The neutral will be white but some switches are wired up with a white wire that is not a neutral.
How do you wire a light switch outlet combo?
Quote from the video:
Quote from Youtube video: Firmly. Next loop the neutral wall box wires lockwise 3/4 of a turn around the silver terminal screw next to the outlet.
How do I wire a receptacle from a light outlet but keep it hot when light is off?
In this case, you must change the cable from the switch to the light outlet from a 2-wire to a 3-wire cable. As you can see, connecting a receptacle to the light would see the receptacle only hot when the light switch is on.
How do you separate a light switch from an outlet?
Your choices are to run a separate line from the electrical box to the outlet, or run a separate line from the hot lines in the light switch box to the outlet. One tip is to make a little drawing of what is connected to what as you take things apart, even tagging wires with labels if you need to.
Why does my outlet have 2 hot wires?
The reason for multiple hot/neutral wires for one outlet is that the outlets are daisy-chained together. This means hot/neutral is only coming from one of the wires and it is being sent to the other wire.
Is it better to pigtail outlets?
Use Pigtails on Outlets
Outlets have pairs of screws on each side that you can use to connect downstream outlets, but it’s best not to use them. There are two reasons for this. First, connecting the wires leading to downstream outlets with wire connectors creates a more secure connection.
Does it matter which black wire goes where on an outlet?
White (neutral) goes on the side allocated for the larger prong. Black (Hot) goes on the smaller prong side or white to silver screws, black to gold screws.
Why are both white and black wires hot?
The black wire is the “hot” wire, it carries the electricity from the breaker panel into the switch or light source. The white wire is the “neutral” wire, it takes any unused electricity and current and sends it back to the breaker panel.
What does black tape on a white wire mean?
Typically, white wires are neutral wires. However, in some cases, the white wire is modified by adding red or black tape to it. This modification signifies that the cables are being used as a live wire, and they should be handled with caution.
What happens if you mix up hot and neutral wires?
This happens when the hot and neutral wires get flipped around at an outlet, or upstream from an outlet. Reversed polarity creates a potential shock hazard, but it’s usually an easy repair. Any $5 electrical tester will alert you to this condition, assuming you have a properly grounded three-prong outlet.
