Do I need baffles in every rafter?

Keep in mind not all rafter need baffles, just those with intake vents at the soffit. If you don’t have baffles installed, check your intake vents for any type of blockage for insulation or debris. This can be cumbersome since you will need to squeeze to the corners of your attic.

Does my attic need baffles?





Are Attic Baffles Necessary? To have a properly airy and insulated roof, you’ll want to have attic vents baffles. So while not every home will have attic soffit vents and baffles, it may be a necessary part of keeping your home safe from mold, condensation, and costly repairs.

Where should attic baffles be installed?

To install the rafter vents, staple them directly to the roof decking. Rafter vents come in 4-foot lengths and 14-1/2 and 22-1/2 inch widths for different rafter spacings. Rafter vents should be placed in your attic ceiling in between the rafters at the point where your attic ceiling meets your attic floor.

How do you install rafter vent baffles?

Quote from the video:
Quote from Youtube video: Position it in place and fold the tab onto the top plate along the line marked fold. Staple the tab to the top plate in a few. Places. Then staple the main body to the roof. Deck.

Can you have too many soffit vents?

You can’t have too much soffit venting, but it’s worth noting the minimum requirements. Usually, 4-in. by 16-in. soffit vents are rated for 26 sq.

Are rafter vents necessary?





Rafter vents, often called baffles protect intake vents in your attic from becoming clogged or covered by insulation or debris. Rafter vents ensure the soffit vents are clear and there is a channel for outside air to move into the attic at the soffits and out through roof vents.

Do I need baffles If no soffit vents?

But not all homes have an overhanging roof line or soffit vents. Without them it is actually easier to insulate your attic, because you do not have to worry about covering up the vents or installing rafter baffles to ensure the vents breathe.

What is the purpose of attic baffles?

Baffles fit between the rafters and underneath the roof’s sheathing near the soffit vents. They keep the insulation from blocking the airflow into the attic. Baffles keep the insulation in place, which helps your home’s energy efficiency.

How do you install ceiling baffles?

Quote from the video:
Quote from Youtube video: Right up to the ridge vent. As you can see we've got the baffles running all the way up to the top and ceiling. We now have to put the last piece in that's going to carry us right up to the ridge bed.

Do I need baffles with batt insulation?



Baffles are required anywhere the insulation can block vents or get too close non-insulation rated recessed fixtures (can lights). Mostly we use insulation baffles prevent blockage of soffit vents from blown in insulation. Batt insulation can simply be held back and physical baffling isn’t really needed.

How many soffit vents do I need?

Most professionals recommend one square foot of ventilation for every 150 square feet of attic area. This will help you determine how many soffit vents you need. For example, a 15′ x 40′ attic would have a total area of 600 square feet; divided by 150 equals 4 square feet of total ventilated space needed.

How do you keep blown in insulation out of soffit vents?

Unfortunately, blow-in insulation can drift into the vents and block the flow of air. The solution is to install rectangular attic baffles, formed to fit between the rafters. Cardboard or thin plastic baffles allow the air to flow into the attic, yet serve as a dam to hold blow-in insulation in the attic.

Should soffit vents be covered with insulation?



Soffit vents are the openings located on the underside of your roof’s eaves. They are designed to allow air to flow into your attic and help keep it cool. You should not cover soffit vents with insulation, as this will prevent the air from flowing and could cause moisture damage to your insulation.

Do blown in insulation need rafter vents?

Installing attic rafter vents before blowing in 22 inches of insulation is extremely important! Proper attic ventilation is essential to both efficiency and shingle longevity.

Can I insulate between rafters?

Warm loft. An alternative way to insulate your loft is to fit the insulation between and over the rafters – these are the sloping timbers that make up the roof itself. You can use rigid insulation boards, carefully cut to size, or you can have foam insulation sprayed between the rafters.

Should you insulate attic roof rafters?

Insulating between rafters will do no good, because the attic should be ventilated, and the rafter insulation would be between two unheated spaces. You can add insulation to the floor; the more the merrier. Just don’t put it in the eaves. Also, make sure the attic is well ventilated.

Do you need an air gap for insulation?



Insulation is technically a solid with a lot of air in it therefore, it is NOT an air gap. You literally must have a VOID, nothing in the air gap except air itself. So if you are installing under a roof or in a wall, you must create an air gap.

How do I make my rafters deeper for insulation?

You can add additional insulation value by installing rigid foam insulation over the surface of the new rafters and batt insulation. Rigid foam insulation comes in 4-by-8 sheets and attaches in a method similar to installing drywall panels.

How do you insulate a 2×8 rafter?

Quote from the video:
Quote from Youtube video: Place the craft faced insulation. Down between the joists on top of the drywall. And with the facing down toward the interior of the house be careful not to compress the insulation.

How thick should rafter insulation be?

100mm to 200mm



Common rafter depths range from 100mm to 200mm. This limits the maximum thickness of the insulation between the rafters to between 50mm and 175mm. This generally would not be a sufficient thickness to achieve the U-values required to meet Building Regulations and more insulation would need to be added.