https://youtu.be/DY7Zj4Apt8k

Is it safe to take a bath on the second floor?

If you are installing a regular tub (even a regular cast iron tub), you’re fine. Most steel tubs weigh a hundred pounds empty and about 500 pounds when full with water. Any floor can handle that easily. Bathroom floor joisting isn’t different from the rest of the house.

How much weight can an upstairs bathtub hold?





Research shows that a standard tub made of porcelain can hold around 40 to 60 gallons of water or 335 to 500 pounds.

Can you have a sunken bath upstairs?

These bathtubs are built into the bathroom floor and the basin of the tub generally sits below the floor line. They can also be built with steps leading up to them so that they are above the floor line, but still have that built-in, under-the-floor look.

Can my floor support a bathtub?

In general, unless there is something wrong with the joist spacing or the wood has rotted, the framing in most houses should be able to support a standard size cast iron tub with no problem. A standard size is approximately 32 inches wide by 60 inches long.

Do I need to reinforce my floor for a bath?

Both floor systems are normally strong enough to support the weight of a cast-iron bath filled with water, and a person. If you’re concerned about the strength of the floor you could ask a professional to check and reinforce it for you. Or, if you’re proficient at DIY, you could try strengthening it yourself.

How do you reinforce a floor under a bathtub?





Quote from the video:
Quote from Youtube video: The floor joists tip number six is reinforcing floor joists with plywood reinforcing joist wood plywood is is a very effective technique and it allows you to add strength.

How much weight can you put on a second floor?

The load capacity of a second floor in a home is regulated at 40 lbs. per square foot. For bedrooms, the capacity is 30 lbs. per square foot.

Can bathtubs break?

Cracks usually mean that more water and moisture will tract into the inside of your bathtub, causing the integrity to weaken more and more overtime, until eventually the entire bathtub cracks in half. Generally, cracking is commonplace in fiberglass bathtubs.

Can a bath be too heavy?

As long as the building you are purchasing the bath for is structurally sound and meets building regulations, a cast iron bath will not be too heavy for the floor. Houses are built to withstand just such eventualities.

How do you install a bathtub on the second floor?



How to Install a Bathtub in an Upstairs Bathroom

  1. Turn off the water and remove the existing bathtub. …
  2. Use a reciprocating saw to cut the tub in half. …
  3. Inspect the ledger boards. …
  4. Inspect the p-trap that attaches to the tub drain. …
  5. Move the new tub upstairs with the help of an assistant.

How much weight can my floor hold?

The International Residential Code, on which most local building codes are based, requires that floors in non-sleeping rooms must support a minimum live load of 40 pounds per square foot, and floors in sleeping rooms must be able to handle a live load of 30 pounds per square foot.

Can your bath fall through the ceiling?

If the floor joists rot enough, they can suddenly give way, causing the shower and anyone in it to fall into the room below. If you suspect the floor joists are rotting, you must examine the joists either by tearing the bathroom floor or the ceiling in the room below.

What is the average weight of a bathtub?



On average, Freestanding bathtubs weigh around 100lbs. Their average dimensions are 65 x 30 x 25 (length x width x height in inches).

Can floors fall through?

A floor collapse injury can occur at a construction site if the floor is made heavier than the support beams that hold it up. Many floor collapses occur when workers begin to pour the concrete that forms the floor.

How do I stop my bath from dropping?

If the bath is dropping then simply tightening the feet might help take up the movement and force the bath up to the seal. You might also consider measuring the distance from the underside of the bath lip to the floor and providing a supporting frame.

Does a bathtub need to be level?

Installing the tub requires that you make sure the tub is level to prevent water from falling off the side onto the floor and to keep the tub from moving when you shift your weight while sitting inside. Larger tubs level best in mortar, but you can level most standard tubs with shims.

What is a sunken bathtub?



A sunken bathtub is a drop-in bathtub that is integrated with the floor. The outer profile of the bathtub is hidden, with only the rim exposed as the rest of the bathtub is made flush with the floor.

Why is my bath sinking?

Water damage can rot away wood, wear down the structure holding your bathtub, and also cause mold problems. This is not the only thing that can happen that could cause your bathtub to start sinking into the floor. The pipes under the tub cannot be easily checked for leaks or wear and tear.

How do you know if floor is under tub rotten?

“Bouncy” Floors



You may notice the area around your tub to act slightly ‘bouncy’ when walking on it. This ‘bounciness’ is a clear sign that the wooden joists under the subfloor are rotten, and thus, weakening.

How do you know if your bathroom floor is rotting?

If you’ve noticed any of the following in your bathroom, there’s a good possibility you have water damage lurking somewhere in the space:

  1. Musty smell.
  2. Recurring mold and mildew.
  3. Warped walls.
  4. Spongy, soft floor.
  5. Gaps in caulk, tile or tub.