Disconnect the wires from the valve solenoid. Touch the valve solenoid wires to the terminals on your activator. The valve should open. If the valve fully opens then the problem is NOT the valve, the problem is with the wires leading from the controller (timer) to the valve, or possibly the controller is broken.

Why wont my sprinklers turn on with the timer?

Here are some common reasons why your sprinkler system won’t turn on: Lawn sprinkler control timer isn’t working correctly. Clogged or dirty sprinkler heads. Broken sprinkler heads.

How do you fix an automatic irrigation valve that won’t close?

Quote from the video:
Quote from Youtube video: Inside there's a membrane. And a tick and we don't want any debris in there or anything that will cause our stiff keep in mind my sprinkling system is pretty old and I have 18 zones in my sprinkling.

How do you turn on automatic sprinkler valves?

Quote from the video:
Quote from Youtube video: Device you'll see two items or in most cases two items that cocks sticking out of the side grab a regular screwdriver. And turn them. So it would be perpendicular to which the water would flow.

How do I fix my sprinkler timer?

Quote from the video:
Quote from Youtube video: Sometimes they're hardwired if they're hardwired just unscrew the two you'll see 24 volts AC you just unscrew those two screws.

Why my sprinkler system is not working?

If your sprinkler system is not getting water, a number of things could be the culprit: The backflow may be off. If the handle on your backflow valve gets inadvertently shut off, it restricts any water from flowing past the backflow and to the sprinkler system valves. Your rain sensor might be faulty.

How do you test a sprinkler valve?

Quote from the video:
Quote from Youtube video: You want to come over and just lightly with your hand tap the side of the valve several times and we want to hear a rattling noise.

How do you know if a sprinkler solenoid is bad?

Signs You Have a Problem

  1. The Water Won’t Shut Off. If you have this problem, it’s very likely the solenoid. …
  2. Low or Uneven Water Pressure. The solenoid controls the water pressure. …
  3. Water Leaks. There are many points in a sprinkler system that can leak. …
  4. Current Testing. …
  5. Valve Inspection. …
  6. Parts Replacement.


How do I know if my sprinkler valve is bad?

Signs of issues in sprinkler valve:

  1. Water not turning Off: If you notice that water is not closing off from the sprinkler, then there seems to be an issue in the diaphragm valve. …
  2. Leaks of water: …
  3. Broken Sprinkler Head. …
  4. Stuck Valve. …
  5. Wiring: …
  6. Irregular Watering:


Why does one of my sprinkler zones wont turn on?

A lawn sprinkler system is usually divided into two or more zones that water independently of each other. Each zone consists of several sprinkler heads controlled by a valve that is electrically activated. If a single zone is not working, the problem is usually an electrical issue or a defective controller or solenoid.

How do I test my sprinkler timer?

Quote from the video:
Quote from Youtube video: Put one probe to each of the terminals marked 24 V AC. The voltage should be between 24 and 28 volts. This confirms that the controller is getting power and that the transformer is working if.

How long do sprinkler controllers last?

In general, they should last a good 40 years as long as they are protected from direct sunlight, which can damage them. Wires, however, must be replaced regularly as they can rust over time. You should also expect to replace your controllers every five to 10 years.

Is it easy to replace sprinkler controller?

Luckily, replacing a unit is easy to do as long as you have a few simple tools. When it’s time to replace your lawn sprinkler timer, all you need to do is remove the old one and connect the wires to the new one. Once they’re plugged in, you can reset the program so your lawn gets watered on schedule!

How do you set a automatic sprinkler timer?

Quote from the video:
Quote from Youtube video: So we're going to take it from the auto setting and the first thing we're going to do is set the time and date you've got the time. And you adjust the time by going up or down.

Where is the sprinkler controller located?

Often these are easily visible. In small yards, there is often a single valve box located near where the irrigation pipes enter the ground from the water source. Larger yards may have remote valve boxes set at the start of each irrigation zone.

Is a smart sprinkler controller worth it?

A small yard won’t need the same level of maintenance as a larger space, so the smart controller won’t be as effective. However, if the functionality and control of a smart sprinkler can help you save money and time in your daily life, the transition will be both cost-effective and useful.

How much does it cost to install a smart sprinkler system?

$500 – $1,000 cost per zone. A new sprinkler system costs $1,800 to $5,200 to install on average. An in-ground sprinkler system costs $500 to $1,000 per zone, and most homes need 3 to 5 zones. Lawn irrigation systems cost $6,000 to $10,000 per acre to install.

What is the best lawn sprinkler controller?

Our Top Picks for Sprinkler Controllers

  • BEST OVERALL: Orbit B-hyve Smart Sprinkler Controller. …
  • RUNNER UP: Netro Smart Sprinkler Controller. …
  • BEST VALUE: Blossom Wi-Fi Smart Water Controller. …
  • BEST UPGRADE: Rachio 3 Smart Sprinkler Controller.