Can you remove a chimney below the roof line?

In order to be able to seal off the roof, you will first need to remove the chimney below the roof line so it is even with or below the roof. Otherwise, you will not be able to lay boards and roofing shingles or tiles to cover the hole since the protruding chimney stack will interfere with this work.

How do you remove a chimney from the roof?

Quote from the video:
Quote from Youtube video: It's a simple single skinned brickwork one flue chimney stack and I've fitted a lightweight scaffold system to just above gutter height and temporarily remove the safety rails.

Is it a good idea to remove a chimney?

WARNING: While it is possible to remove a chimney yourself, it isn’t a good idea unless you have home improvement experience, you’re comfortable performing manual labor up on your roof, and you have a helper nearby to assist you and maintain safety as much as possible from the ground.

Can you remove a chimney yourself?

Whether you do the project yourself or hire a contractor, be warned that removing a chimney is time-consuming work, especially traditional brick ones. A brick chimney must be carefully disassembled one brick at a time to avoid structural damage.

How do you know if a chimney is load-bearing?

How To Tell If A Fireplace Is Load-Bearing. A general rule of thumb to see if a wall – or fireplace – is load-bearing is to check how it aligns with floor joists. If the wall runs parallel to the joists, it is less likely to be load-bearing.

Do I need a structural engineer to remove a chimney breast?

NB You are always likely to require the services of a Structural Engineer if you intend on removing the chimney and breast. If you don’t get an expert involved, you risk serious structural degradation to your property which might result in the building collapsing which carries the risk of death.

Is removal of a chimney permitted development?

The removal of an external chimney will usually be classed as Permitted Development (PD) and automatically have planning permission. PD rights only apply to dwelling houses and not to flats. PD rights can be removed or restricted for properties in a conservation area or national park, so check before undertaking work.

Can you remove just downstairs chimney breast?

If you intend removing the chimney breast from downstairs only, you’ll need a stronger lintel than if you removed everything up to loft level. Usually, a structural engineer will specify a Rolled Steel Joist (RSJ) at every level to support the floors and ceilings as well as the remaining chimney breast.

Can you remove half a chimney stack?

you can not remove half of a shared chimney stack because the brick work is all tied in together and removeal of your half of the stack will cause it to become unstable.

Is a chimney breast load bearing?

When you take out a chimney breast, you are also removing an important load-bearing wall. Because of this, you will need to ensure the structural integrity of your building isn’t put at risk – which means you need expert guidance and approval from your council to be certain the job is done safely.

Do you need building regulations to remove a chimney?

The chimney stack

You won’t need a building regulations application to just remove the stack above the roofline. However you will need a building regulations application to remove all of the chimney stack throughout the house as the stack may support walls, floors or the roof structure.

How do you remove an internal chimney?

Quote from the video:
Quote from Youtube video: The attic. Then when the homeowner remodels the rooms below it on the second floor the first floor. And so forth he can open up the walls where the chimney is boxed in and remove the brickwork.

Is a chimney structural to the house?

A majority of chimneys are independently supported and are not structural to the walls or roof. However, it isn’t uncommon for chimneys to be in the middle of a home or stretch from the foundation, through multiple stories, and out the roof.

Can a chimney be structural?

Sometimes, chimneys are so old and worn, they can have structural damage on the outside that you may or may not notice. When you do notice the issue, however, you might think it adds even more of a vintage look and feel, with the occasional masonry damage just adding quirkiness to your home.

What is the support structure of a chimney?

Structural chimneys are primarily made of silicate bricks. It has a strong upward draft that draws out the by-product of burning fuel. And these gases are emitted by a part called flue that hides behind masonry. In addition, a chimney pot is located on the top of the chimney cap.

Whats at the bottom of a chimney?

The smoke shelf is located at the base of the smoke chamber, and helps to prevent backdrafts down into the firebox. The smoke shelf also collects and helps to protect the firebox from any water or debris that makes its way down the chimney.

What is the bottom of a chimney called?

Ash pit: A compartment at the base of a fireplace that catches ash. Cleanout door: A door in the chimney that’s behind the fireplace or outside the house where debris can be removed.

How are chimneys attached to house?

A common and cheaper temporary fix that could have been done to hold the chimney in place is to fill the gap between the leaning chimney and main house structure with mortar or some type of caulking or expanding foam insulation. The chimney could also be fastened into place with metal straps.

Does a chimney have its own foundation?

Chimneys almost always have their own foundation and or footing. And usually, it’s not built up to par with the rest of the foundation Just like there are specific signs and symptoms to look for in foundation settlement and foundation upheave.

How do you lift a chimney?

Quote from the video:
Quote from Youtube video: So it's just settling it steadily and so the process to go through is. Using some type of a pier system basically put it back onto solid ground that we can actually.