How do you drill straight holes in square tubing?

If I have to drill square tubing with a hand operated electric drill I will use a square and mark a line all the way around the four sides of the tubing at the location along the length where the hole is to be located. Then mark the center locations of the holes on the two faces of the tubing on opposite sides.

How do you drill two holes in steel?





Quote from the video:
Quote from Youtube video: And also its salt it's a you know centers itself perfectly sometimes when you start drilling with a smaller bit and work your way up the hole will work its way over one way or the other depending on.

How do you drill a hole in a metal tube?

Quote from the video:
Quote from Youtube video: Now before you get started and drilling in metal you want to make certain that you use a lubricant it'll keep the bit nice and cool.

How do you drill a straight hole in metal without a drill press?

Using glue and clamps, place the blocks against a square to ensure a perfect 90° angle. Allow the glue to dry, then drill a hole in one side and add some string or wire for easy storage. I keep mine attached to a clip on my tool bag, where I keep my drill, some bits, a small level and drywall anchors for small tasks.

Why won’t my drill bit go through metal?

Regular drill bits are not designed to cut through metals. Therefore, they can easily wear away. So you need hard bits which can drill through metals without being damaged.

How do you use a step drill bit?





Align the tip of the self-starting step drill bit with the center mark on the metal’s surface. Depress the drill’s trigger to start drilling the hole. Run the small step drill bit completely through the metal. Apply additional cutting and tapping fluid as necessary to keep the step drill bit cool.

Does heating metal make it easier to drill?

The faster a bit spins, the hotter it gets. And heat dulls bits quickly. In general, it’s a good idea to drill through metal using as slow a speed as possible using a drill bit for metal.

Why is my drill not making a hole?

The most common reason a drill won’t penetrate a wall at all is because the drill is spinning in the wrong direction. If the drill bit enters the wall and then hits resistance, the typical cause is a metal plate or masonry obstruction.

What is the best drill bit to drill hardened steel?

cobalt drill bits



Clearly, the best drill bits for hardened metal or steel come with a cobalt blend. These cobalt drill bits use an alloy including 5%–8% cobalt. This cobalt makes up part of the steel blend, so the hardness of the bit doesn’t wear off with a coating (like titanium bits). It runs throughout the entire bit.

How do I ensure straight drilling?

Quote from the video:
Quote from Youtube video: Together like so i want the edges to be flush. And then i'm just going to take my pin nailer. And put a couple pin nails in there. And if you don't have a pin nailer. That's fine too you can use glue.

How do you drill a perfect straight hole?

Place it label side down on the workpiece and centered over where you want the hole. Set the drill bit into the disc’s hole, and position the drill until the bit is in a straight line with its reflection. Nail together a couple of 1 x 2 scrap pieces to form a right angle.

What can be used instead of drill press?



But there are just too many drill press alternatives in the market. It can get hard to choose one.



  • Kreg K4 Pocket HoleJig System. …
  • Milescraft 1318 DrillMate Drill Guide. …
  • Wolfcraft 4525404 Drill Guide. …
  • Milescraft 1312 DrillBlock. …
  • Rockler Jig IT Drill Guide.


Do you really need a drill press?

For almost any kind of craft work, my answer is “yes!” Drill presses give you power, precision, accuracy, and repeatability that you will never get from a hand-held drill.

Can I use a drill instead of a drill press?

Simply attach any handheld drill with a 3/8″ chuck and you’ll be ready for a variety of drilling operations, all performed with an accuracy that would be just about impossible with an unaided power drill.

How can you drill a hole without a drill machine?



Quote from the video:
Quote from Youtube video: Need to drill a photo hook into the wall but don't have a drill bit here's a trick grab a nail that is smaller than the screw you need nail. It into the wall hard enough to make a hole.

How do you make a hole in a hole without a punch?

Push pins, thick needles and nails may also be used to punch holes through paper, cardboard and other materials without nails. These items all create relatively narrow holes, which can be widened by placing a skewer through the hole once you puncture the project material.

Can an electric screwdriver be used as a drill?

A cordless screwdriver that has multiple torque settings, may have a drill symbol on the adjustable torque ring. This indicates that it is capable of drilling holes.

How do you make pilot holes?

In a pinch, you can still make a pilot hole by choosing a nail that’s the same size as your screw’s body, and then carefully hammering it straight into the wood to the appropriate depth before pulling it back out. Then, use a manual or powered screwdriver to complete the rest of the project.

Do you drill pilot holes all the way through?



You don’t.



If not, here’s how you properly drill a pilot hole. Begin by understanding this: the hole drilled through the top piece of wood isn’t a pilot hole at all — it’s a clearance hole. This hole completely clears the material, allowing the screw to pass through, without cutting into the wood.

What type of drill speed is needed for most metal drilling operations?

slow drill speeds

6. Use slow drill speeds for drilling metal and fast speeds for drilling wood.