What is the standard power cord?
North American: NEMA 5-15P (Type B)
Among the NEMA 5-15P plug are the most widely used in sockets. They are three-wire circuits (hot, neutral and ground), and are rated at 15 A at 250 V, although they usually carry 110 V. NEMA 5-15P to NEMA 5-15R power cord is the most common type.
What do the numbers on a power cord mean?
They refer to the number and types of wire inside the cable. For example, 14-2 means the cable has two 14-gauge wires inside. 12-3 G means the cable has three 12-gauge wires plus a bare ground wire.
Can I use my old range power cord?
It is certainly possible to use the cord from an old range as long as it is still in safe working order with very minimal wear and tear. There should not be any wiring exposed, tears, or cracks. You will also want to make sure the cord and your breaker can handle the amps from your new range.
What are the different types of power cords?
Below is a short glossary of some of the different codes you will find:
- S – Service Grade. This means the cord is 600-volt rated.
- SJ – Junior Service. Meaning 300-Volt rated.
- T – Thermoplastic. The wire is coated in PVC.
- P – Parallel. …
- O – Oil-Resistant. …
- W – Weather-Resistant. …
- V – Vacuum Type.
What is a C19 power cord?
Power Extension Cord, C19 to C20 – Heavy-Duty, 20A, 250V, 12 AWG, 6 ft. (1.83 m), Black. See All Images. C19 to C20 20A heavy-duty extension cable connects high-output devices with C19/C20 power connectors, including blade server chassis. Recommended for powering servers, routers and other high-output network devices.
How are power cords rated?
Common household extension cords are available in 16 gauge (smallest), 14 gauge, 12 gauge, and 10 gauge (biggest). The lower the number, the bigger the gauge and the greater the amperage and wattage is.
What is a C13 power cord?
These high quality 3-pin IEC mains power cords are suitable for many types of desktop computers / electrical appliances and are sometimes colloquially referred to as “Kettle leads”.
Does C19 plug into C20?
Common uses for the C19 connector/C20 inlet include medical equipment, test equipment, and IT equipment, along with commercial appliances, some home appliances, data centers, power distribution devices, and professional food equipment, to name a few.
What is a C7 power cord?
C7 Power Cords:
C7 is the two-pronged non-polarized connector. They have 2 prongs side-by-side. C7 Power cords are typically used to power low voltage appliances such as portable CD players, laptop power supplies, video/audio equipment, etc.
What are appliance cords made of?
Power supply cords consist of a conducting medium (typically copper), which is concealed by a protective, insulating material. There are some power cords that are detachable, and others that are permanently attached to the appliance or piece of equipment.
What is C15 power cord?
C15 connectors are designed in such a way that they can handle high temperature devices like electric kettles, server rooms, computing networking closets and Power over Ethernet switches having high wattage power supply. These connectors work on the temperature rating of 120°C.
Does C13 plug into C15?
It is noted that C15 connector also fits into C14 inlets while C13 cannot fit into C16 inlets.
C13 vs C15 Power Cord: What’s the Difference?
| Connector Type | C13 | C15 |
|---|---|---|
| Ground Post | Yes | Yes |
| Rated Current/Voltage | 10A/250V | 10A/250V |
| Shape Characteristic | No notch | A notch opposite the earth |
| Appliance Inlet Type | C14 | C16 |
What are C14 and C15 power cord?
Product Description
Molded C14 to C15 Power cord. Male end has an C14 plug, female end has a C15 connector. Cable uses a heavy duty 14 AWG jacket, and is rated for 15 amps and 250V. Used to connect server and networking equipment to a power strip in a data rack.
What is the difference between C19 and C20?
A C20 power cord is rated by NEC up to 20 Amps in North America and by IEC up to 16 Amps in the balance of the world. C19 is rated by NEC up to 20 Amps in North America and by IEC up to 16 Amps in the balance of the world.
Is C19 a male?
IEC-320 C20 (male)
IEC-320 C20 is a male connector on the device being powered. A female connector (C19) on the power cable plugs into it.
What is the difference between C13 and C19?
For example, the most common cable is the C13, which is used to power standard PCs and monitors. With today’s high-power applications, the C19 connector is becoming more common for use with servers and power distribution units (ePDU). Each connector has two part numbers.
What does a C20 plug into?
IEC 60320 C20 PLUG (MALE)
The IEC 60320 C20 is a grounded 3 Wire Plug rated up to 250V and 20 Amps. It is commonly used with either 14awg or 12awg conductors, depending on the application and the power draw required for the device.
What is the difference between C13 and C14?
C13 connectors offered by Interpower are rated at 10A/250VAC international and 15A/250VAC North America with a temperature rating of up to 70°C. C14 inlets are also rated at 10A/250VAC international and 15A/250VAC North America with a temperature rating of up to 70°C.
