What are the different types of drywall anchors?

Most anchors fall into one of seven categories. They’re either sleeve anchors, drive anchors, internally threaded, externally threaded, hollow wall anchors, screws, or they’re masonry screw and pin fasteners.

What kind of drywall anchor should I use?





A toggle bolt is the type of drywall anchor that you will want to buy when you need to hang very heavy items. If you are going to be hanging up shelves that will hold a lot of weight, then you will need to have good bolts that can secure them properly.

What is the strongest type of drywall anchor?

metal toggle bolts

Traditional metal toggle bolts are the strongest of the bunch, but they’re not the simplest to install because they require drilling a hole that’s approximately three times wider than the diameter of the bolt (necessary to insert the anchor).

What are wedge anchors?

“Wedge anchor” is a generic term for a type of anchor used to fasten a variety of materials to concrete. Some companies have different brand names for their wedge anchors such as Kwik Bolt, Power Stud, and Thunderstud.

What are the different types of Sheetrock?





6 Common types of drywall

  • Regular drywall. Regular drywall, often called white board, is the most common type used in ceilings and walls in homes and commercial projects. …
  • Mold-resistant drywall. …
  • Plasterboard. …
  • Soundproof drywall. …
  • Fire-resistant drywall. …
  • VOC-absorbing drywall.

Do drywall anchors need a stud?

There’s never a stud when you need one. If you’re looking for a clever solution to hang a picture or other fixture to drywall, try one of these. Whether fastening a framed picture, mirror, shelf, or curtain rod to a wall, it’s always best to screw or nail directly into a wall stud.

Should I use drywall anchors?

Any time you set a fastener like a nail or screw into a material that doesn’t hold tight, you use an anchor to hold it in place. That’s why materials such as drywall, brick and concrete need anchors.

Can I use drywall anchors to mount a TV?



A toggle anchor or a toggle bolt is a great way to hang a TV without studs. You’ll need to use a hollow wall anchor that looks similar to a regular screw, with a butterfly toggle at the end. Once you’ve placed them in the wall, they’ll attach to the back.

Which is better wedge anchor or sleeve anchor?

The wedge anchor, drop-in anchor and concrete strike anchor can only be used in solid concrete and have the highest & most consistent holding values in concrete. Concrete sleeve anchors can be used in concrete, brick or block but their holding values are less in terms of shear and pullout values.

What is the difference between wedge and expansion anchors?

The wedge anchor can only be used in solid concrete.



Wedge anchors are designed not to be used in other masonry materials such as brick or hollow block. The expansion clip on the wedge anchor is placed on the anchor body in a manner and location that makes the expansion tolerance location critical.

What is sleeve anchor?

Sleeve anchors are versatile masonry expansion anchors. They can be used in a variety of base materials, and they are available in a wide variety of diameters, lengths, and head styles. They come preassembled, so they are ready for immediate installation.

Can you use sleeve anchors in drywall?

Offering better holding power than nails and screws, these sleeve type anchors are commonly used to mount fixtures to hollow walls like drywall (wallboard) and wood paneling.

What is a screw anchor?

Screw anchors are inserts, typically made from plastic, metal, or fiber, which enable the attachment of screws into brittle materials — such as masonry or dry wall.

Are sleeve anchors strong?



Sleeve anchors are by far the most versatile fastener and can be employed in a plethora of projects, including those that include concrete as the base material. In fact, they are commonly utilized in securing heavy weighted items of up to 200 pounds to a concrete surface.

Are sleeve anchors permanent?

Anchor Bolts (Shield Anchors)

The Drill-Out Anchor Bolt is a “One-way” fixing which is designed to be permanent. It is installed using a standard Hex Allen Key (not supplied with the bolt), but once fully tightened, the Drive Socket in the head of the bolt must be drilled out, leaving no way to undo the bolt again.

How much weight will a sleeve anchor hold?

Generally speaking, sleeve anchors fall into the medium-duty territory or up to 200 pounds of weight that can be secured safely.

Are Tapcons better than wedge anchors?



Tapcon and wedge anchors are pre-installed mechanical anchors that attach structural objects to concrete structures. However, the wedge anchor suits heavier-duty applications, vs the Tapcon anchor that typically serve lighter deployments. Another difference between them is in their fastening method.

What is a drop in anchor used for?

Drop-In anchors are female concrete anchors designed for anchoring into concrete. Drop the anchor into the pre-drilled hole in the concrete. Using a setting tool expands the anchor within the hole in the concrete.

What are Tapcon screws used for?

The standard blue Climaseal® Tapcon® screw are a light duty masonry anchor primarily used in dry indoor applications for attaching items to concrete, brick or block. They can be used in applications ranging from attaching 2×4 lumber to concrete, a light fixture to brick, or furring strips to a block wall.