What is the pipe coming out of the furnace?

If your furnace is 90% efficient or greater, you probably have PVC pipes coming out of the wall of your home that look something like those pictured here. These pipes allow the furnace to intake fresh air and to safely vent flue gasses out of the home.

What is the copper pipe on furnace?





Copper pipes are commonly used in the construction industry for water supply lines and refrigerant lines in HVAC (heating, cooling, and air-conditioning) systems. Copper pipes can be manufactured as soft or rigid copper and offer excellent corrosion-resistance and reliable connections.

Where is the furnace exhaust?

Old furnaces tend to be furnaces with standard-efficiency ratings. These furnaces vent gas away from your house through a flue pipe. The flue pipe is attached to the heat exchanger, where the gas combusts and produces heat energy. Gas exits the house through the exhaust pipe, which usually leads up to a house’s roof.

How do you drain water from a furnace?

How to Drain Your Boiler

  1. Step 1: Do a Quick Flush. …
  2. Step 2: Turn off Your System. …
  3. Step 3: Open the Drain Valve and Flush the Tank With Water. …
  4. Step 4: Refill Your Hot Water Heater. …
  5. Step 5: Relight the Water Heater and Check the Drain Valve.

What is the pipe coming out of the side of my house?





One pipe is an air conditioning condensate drain, also commonly referred to as an AC drain line. These pipes are usually white in color and are made from PVC piping. Another pipe you may find on the outside of your home is a water pressure relief valve, also known as a PRV drain line.

What are the pipes on the side of my house?

The two most common drain pipes that most people have on the side of their house are: Air conditioner condensate lines (AC drain line). Water heater pressure relief valve lines (PRV drain line).

Does copper pipe come with AC?

The copper tubing can also be connected to each other by brazing. The refrigerant tubing comes along with the new split air conditioner, and you don’t have to purchase the new one unless the distance between the indoor and outdoor units is too long.

Do AC lines have to be copper?

Typically, air-conditioning systems use soft copper piping, which comes from the manufacturer in 25- to 100-foot rolls. Rolled copper limits the amount of leak-prone braised fittings, but it requires custom bended turns.

What is the small copper line from a air conditioner?



The small line out of the compressor unit is the supply line. it supply’s liquid refrigerant to the evaporator.

Where is furnace drain line?

It may be located directly under the indoor air handler in your attic or utility closet. It may be covered by a removable access panel. If there is standing water in the condensate pan, your drain line is probably clogged.

What happens if furnace condensate line is clogged?

A clogged condensate drain line will trap water in your air conditioner. As a result, the evaporator coil will eventually turn to ice. The moisture in the drain line can also freeze, which will cause your air conditioner to turn off.

Where does furnace drain go?



All condensate drains go into a trap. The condensate trap is absolutely mandatory for a high-efficiency gas furnace. Since the drain taps into the exhaust system, leaving it open to the air would allow for a potential exhaust/flue gas leak in the living space, which is a big no-no.

What size is furnace drain pipe?

Condensate waste and drain line size shall not be less than 3/4-inch (19 mm) internal diameter and shall not decrease in size from the drain pan connection to the place of condensate disposal.

Where should a condensate pipe be installed?

Where an installer is fitting a new or replacement boiler, the condensate discharge pipe should be connected to an internal “gravity discharge point” such as an internal soil stack (preferred method), internal kitchen or bathroom waste pipe such as sink, basin, bath or shower waste.

Do furnaces have condensate lines?

Although some HVAC units and furnaces have what’s called a “condensate pan” beneath them to catch drips, most modern units entrust the condensate line with effectively funneling all residual water outdoors where it can evaporate into the air.

Do all furnaces have condensate drains?



A high-efficiency furnace (also called a condensing furnace) will always have condensation as a byproduct of heating your home. A floor drain is necessary for your high-efficiency furnace because the water has to go somewhere and a floor drain is the easiest and most effective outlet.

What is AC drain pipe?

A condensate drain line is a line that runs through a home or building’s central air conditioning system and leads to the outside. Condensate lines are typically crafted with PVC pipe or metal, and they provide a funnel for the humidity and condensation created by air conditioner evaporator coils as the systems run.

What are condensate lines?

The condensate line is a simple pipe that performs a very important function, safely draining excess moisture away from your home. You can identify this drain by finding the PVC or metal pipe that passes through an exterior wall to the outside.