5/8″ type X5/8″ type X (fire-rated) drywall must be used at the ceiling.

What can I use instead of drywall on garage ceiling?

Garage Ceiling Drywall Alternatives

  • Rigid Foam Insulation. Rigid foam insulation can serve the dual purpose of concealing the rafters and insulating the garage space. …
  • Acoustic Ceiling. …
  • Lumber. …
  • Choose Ceiling Coverings With Caution.





What material should I use for garage ceiling?

One of the most popular garage ceiling materials is drywall. It is notable for its seamless look and also for the fact that it is easy to use. Likewise, it is easy to maintain as it can be patched when there is damage. Most especially, drywall is pocket-friendly and has an insulative property.

Should you drywall a garage ceiling?

Protects From Fire



Drywall is a great building matter that is highly resistant to fire so it is a great addition to garages. Garages often have power tools in them, flammable materials, and also people who work on cars with products that could catch fire. Installing drywall would be a good idea to keep it a safe area.

Can you use 1/2 inch garage ceiling drywall?

1/2-Inch-Thick Drywall



Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings. These panels are easy to carry and hang.

Can you use drywall in an unheated garage?





Yes you can install drywall in an unheated garage too! Drywall is cost effective and easy to install. For an attached garage you must use drywall for the garage wall adjoining the house, as per the building code. Drywall is a great sheathing material for garage walls.

How do I finish my garage cheaply?

Quote from the video:
Quote from Youtube video: Before you have to mud and tape it and nobody likes doing that. So you'll see i did the same similar effect on these wood beams i have not finished the stairs yet but i did do the railings.

How do you drywall a garage ceiling?

Quote from the video:
Quote from Youtube video: So this would be individual roof rafters. Along with collar ties collar ties are the board's. That attach the dead hold the Raptors together at the top underneath.

Can I use OSB for garage ceiling?

An added advantage of having OSB on the ceiling is the ability to secure a variety of light weight things to the ceiling without the hassle of locating a rafter, and this is awesome if you use the space as a shop/work area.

What is the cheapest way to cover a ceiling?



Glue-On and Staple-On Ceilings



If you’re looking for an affordable option that’s low maintenance and easy to install, consider a glue-on or staple-on ceiling. They’re available in basic textures and elaborate designs and attach directly to the existing ceiling or onto furring strips attached to the ceiling.

Can you use ultralight drywall on ceilings?

There is no appreciable design advantage for ultralight drywall over standard drywall. This is a material that can be used for all wall and ceiling finish surfaces in any residential application.

What type of drywall is used for ceilings?

5/8-inch thick drywall is the best drywall thickness for ceilings. Although you can use any type of drywall for ceilings as long as its installed correctly (even ultralight 1/4-inch thick drywall), a thicker panel is best. 5/8-inch thick drywall is the sturdiest which prevents sagging between ceiling joists.

Can you hang drywall on ceiling with 24 centers?



drywall thickness, lightweight is ideal for ceilings that have joists 24 inches on center. Regular 1/2-in. drywall has always been approved for use on 24-in. spacing on ceiling framing, but because of heavy sagging insulation, wet ceiling textures, or higher humidity, either a 1/2-in.

How far can you span 5/8 drywall?

5/8″ might span it, though you’ll end up with a lot of 6″ scraps due to 90 rather than 96″ spacing. 1/2″ not a chance – it will sag badly. If you strap it, you only need 1×3, and you don’t (IMHO) want it 24″ apart which is already a marginal spacing on ceilings – put it 16″ or even 12″ apart.

What is anti SAG drywall?

SHEETROCK® brand sag-resistant interior ceiling panel is designed to meet the need for a lower-weight ceiling. board offering excellent sag resistance, even when wet-textured. These superior-grade panels are only 1/2″ thick, but offer improved resistance to sag when compared to standard 5/8″ gypsum board.

When should you use 5/8 drywall?

5/8″ Type X is most commonly used for ceilings due not only for its rigidity (no sagging), but also its fire-resistance and acoustical blocking. You’ll certainly want to use at least 2-inch drywall screws to hang it.

Which is better drywall or sheetrock?



No, there is no difference between Sheetrock and drywall. Sheetrock would likely be the standard for what drywall should be. If you see in a tutorial that you should use Sheetrock, you can use any type of drywall available to you. Whether the drywall will be as high quality as Sheetrock is a different question.

What is the difference between sheetrock and drywall?

Drywall and sheetrock are really the same thing. Drywall is a panel made of gypsum plaster pressed between two thick sheets of paper. Sheetrock is a brand of drywall patented by the US Gypsum Company. Both are used to make walls and ceilings.

Can you use 3/8 drywall ceiling?

Depending on the joists spacing, whatever you save by installing 3/8″ you will likely loose because the thinner the drywall the harder it is to install it, especially on the ceiling. 1/2″ will be just fine even with 24″ joists spacing but in many jurisdictions garage ceilings require 5/8″ due to fire regulations.

What size drywall should I use in garage?

For the majority of your garage, you can use standard 1/2 inch drywall. For the ceiling and wall abutting the house (if this is an attached garage), you should use 5/8-inch sheetrock or type X fire-rated drywall. Always check your local building codes. There is a code for everything, and your drywall is no exception.

Should you stagger ceiling drywall?



It’s not necessary to stagger seams on ceiling drywall. However, because these joints are relatively difficult to finish – and tend to be noticeable in the finished product – it’s a good idea to stagger the drywall panels to make the joints less visible.