What are the parts of a P-trap?

The P-trap is made up of two parts: the U-bend (3a) and the trap arm (3b). These two curved sections of pipe allow your sink to be connected, ultimately, to the sewer line. The curved trap is a simple safety feature that holds standing water, which prevents sewer gasses from rising up and out of your sink drain.

How do you connect drain pipe to P-trap?

Quote from the video:
Quote from Youtube video: Take your straight pipe. Put it up here. So lightly tighten it down like that again take your nut. And then put on. Now take your p-trap.

What does P-trap connect to?

In a nutshell, a p-trap is a u-shaped bend in the waste pipe that connects a sink’s drain to a home septic tank or to a municipal sewer system.

What is a pipe trap called?

What is a P-trap? P-traps are U-shaped pipes in toilets and underneath sinks. P-traps hold a small amount of water that prevents sewer gases from rising up into your home.

What is the pipe under the sink called?

P-Trap: A P-trap is a two-part pipe under your sink that allows waste and water to pass through.

What is the U shaped pipe under the sink?

The P-Trap Under Sink Plumbing Mechanism

The U-shaped bend in your drain pipe is called the p-trap. This pipe is also referred to as a trap. However, the term trap can refer to a number of plumbing fixtures that serve similar purposes.

How do you connect a P-trap to a tailpiece?

Quote from the video:
Quote from Youtube video: Fit in here is a tight fitting I'm just going to go ahead and put some teflon paste.

How do you hook up a P-trap?

Quote from the video:
Quote from Youtube video: Off of the drain assembly pipe coming down to make it all fit so i've got it all dry fitted together i'm going to glue the abs fitting on and then we're going to simply just screw together the pieces.

How do you connect PVC to metal P-trap?

Quote from the video:
Quote from Youtube video: We'll take a nut place it over a metal pipe and then take a washer slide that plastic over the metal pipe. And then slide your s trap. Into your pipe. And then tighten that nut.

What is a trap in plumbing terms?

A plumbing drain trap is designed to retain a small amount of water each time the sink drains, and this water standing in the bottom of the curved portion of the trap seals the drain and keeps sewer gasses from escaping the drain and entering your home.

What is plumbing vent pipe?

A plumbing vent pipe works alongside your drain pipes, except it doesn’t carry water. Instead, it regulates the air in your plumbing system. Also called a vent stack or plumbing air vent, the vent pipe regulates airflow to assure waste and water flows through pipes that drain out of your house.

What are the different types of traps in plumbing?

In brief, there are different types of traps in Plumbing: Floor Trap or Nahni Trap, Gully Trap, P Trap, Q Trap, S Trap, Intercepting Trap, Bottle Trap, Grease Trap.

What is a sink flange?

A sink flange is a device used to connect a sink with a drain pipe. Typically made with a threaded design, a sink flange is attached to the sink prior to the drain pipe connecting to the flange. Both gaskets and plumber’s putty are used to prevent leaks from a sink flange when it is installed.

What are the parts of a bathroom sink called?

Bathroom sink drain parts

  • Shut-off valve. The shut-off valve is where the water reaches your sink system from the main supply. …
  • Ferrule and compression nut. …
  • Water supply line. …
  • Faucet handles. …
  • Faucet. …
  • Lift rod handle. …
  • Pop-up stopper. …
  • Pop-up flange.

What is the name of the thing in the kitchen sink?

A garbage disposal unit (also known as a waste disposal unit, garbage disposer, garburator etc.) is a device, usually electrically powered, installed under a kitchen sink between the sink’s drain and the trap.

What are the parts of a kitchen sink drain?

A Brief Introduction Of The Kitchen Sink Drain Parts

  • Sink Strainer. You should see the sink strainer whenever you use your kitchen sink. …
  • Tail Piece. You’ll see the tail piece just right after the strainer. …
  • Tee. A tee is a pipe that’s shaped like the letter “T”. …
  • Waste Arm. …
  • Extension Tube. …
  • Coupler. …
  • Elbow. …
  • P-Trap.

What is hose next to faucet called?

Let’s talk about hose bibbs. Sometimes called an outdoor faucet (and technically termed “sillcock”), a hose bibb is a valve where you attach your garden hose.

What is the little thing next to the faucet?

Reddit user @dominostracker wondered the exact same thing, and according to a few wonderful human beings who took the time to answer, that thing is an air gap. It helps prevent dirty water from the dishwasher flowing back through the pipes and contaminating the clean water.

What is a faucet bib?

A hose bib is a threaded faucet located on the outside of your home. It’s known by a variety of names, including outdoor faucet, wall hydrant, tap and spigot. You’ll also find a variety of types; including a yard hydrant, frost-free, outdoor kitchen sink faucet and outdoor shower.