HOW IT’S DONE – FULL VS. HALF INGROUND POOL REMOVAL
- Draining the pool of any remaining water.
- Drilling holes in the bottom of the pool for additional drainage.
- Demolishing the top layer of the pool.
- Backfilling the pool with rubble—usually gravel and soil.
- Adding and compacting topsoil.
How do you take down an in ground pool?
- Empty the pool. The first thing you will need to do is empty the pool. …
- Remove the pool equipment. Disconnect and remove all the hoses, filter, pump, etc. …
- Remove the liner. …
- Remove the top rail. …
- Remove the connecting strips. …
- Remove the bottom metal rim.
- Drain the pool. …
- Tear it down. …
- Haul it away. …
- Repair the site.
How do I get rid of my swimming pool?
Inground pool removal typically involves draining the pool, drilling holes in the bottom, demolishing the top, and filling the pool with the rubble and additional dirt soil.
Removing an Above Ground Pool
How long does it take to remove pool?
On average, you can expect the pool removal process to take 2 – 5 days from start to finish. In the case of a complete pool removal, the removal and fill process will only take about 3 days; but city inspections can delay this by a couple of days.
How much does it cost to fill a pool?
The average cost to fill in an inground pool is $4,000 to $16,000 for full demolition or $2,000 to $10,000 to fill in with dirt. An above ground pool removal costs $300 to $800, or $2,500 with a deck. The cost to get rid of a swimming pool depends on the size, depth, material, and accessibility.
How do you take down a pool for the winter?
For above-ground pools, winterizing usually involves using a Shop Vac to blow air into your skimmer and through your plumbing. You can also suck water from your skimmer. Just keep in mind that for this to work you’ll have already drained your water just below the skimmer.
Can you reuse a pool liner?
Unfortunately, it’s not recommended to reuse a pool liner. Not only are they meant to be used one, but also they get brittle and shrink when they’re taken out of the water. Trying to reinstall a cover that’s been out of the water won’t get you the same quality as if you were to purchase a new one.
Can I just fill my pool with dirt?
Filling your pool with dirt is the fastest and most affordable way to get rid of a pool because there’s no need to remove your concrete or metal shell. This saves on both labor and hauling costs. However, filling a pool with dirt is still a delicate process that requires careful preparation, drainage, and demolition.
What to do with a pool that is not used?
If you don’t go the Deckover route, following are a few other options during the time when your swimming pool is empty and/or you no longer want to use your pool for swimming: Turn your pool into a skateboard park. Watch kids play games inside an empty swimming pool. Host a party inside your empty pool.
Can you build a deck over a pool?
If your pool has outlived its usefulness and it would cost more to repair than you can afford, you can cover it. Building a deck over a pool presents a challenge similar to any raised deck, so be prepared for hard work, sore muscles and a great sense of accomplishment.
What is the cheapest way to fill a pool with water?
While it may not be the fastest way, using a garden hose and city tap water is the cheapest way to fill your swimming pool. The average American family uses 12,000 gallons of water per month. And the average-sized swimming pool is around 15,000 gallons.
Can you use a fire hydrant to fill a pool?
Can I Use A Fire Hydrant To Fill My Pool? In terms of the question as it stands, yes, you could technically use a fire hydrant to fill a pool. That’s because technically it is possible to use a fire hydrant to pump large volumes of water quickly into a swimming pool.
Why would you fill in a pool?
Some are opting to fill in or demolish their swimming pools rather than continue to maintain or remodel them. Or maybe you have bought a house with an in-ground pool that is in need of repair, requires too much maintenance, or you can use the space for something else.
Should I backfill around my pool?
To reduce a pool wall collapse when using an above ground as an inground, you’ll need to fill the pool first, then backfill. Remember, the water level in the pool should always be higher than the ground by at least afoot.
Can a well fill a pool?
As we said above, you can fill your swimming pool or hot tub with well water. In fact, it’s one of the least expensive options, especially compared to a pool water delivery service. Some people choose to fill their pools with city water or municipal water from their house, but not everyone has this option.
How hard is it to fill in a swimming pool?
Swimming pools are fairly deep, and require large amounts of material to fill. That is why you want to purchase a low cost fill, topsoil will be needed, but only for the surface layer.
How much does it cost to fill a pool with dirt?
To know how much fill dirt you will need, measure the length, width, and depth of the pool (use feet as your unit of measurement). Multiply each measurement together, then divide that number by 27 (the number of cubic feet in one yard). The result is how many cubic yards of fill dirt you will need to order.
How much dirt comes out of a pool excavation?
To calculate how much dirt will come out of the hole, simply take the dimensions of the hole and multiply them to find how many cubic yards of dirt will be removed. A cubic yard is 3’x3’x3′ and the ratio is typically figured at 1.35 tons of dirt per cubic yard.
Can you fill in half a pool?
Yes, making a pool smaller is very common, there may be some limits to what can be done as you should only reduce areas that are capable of withstanding the additional weight placed on the pool structure. Most commonly, older pools may have lots of curved areas and little sections that may be cut off on an angle.
How much does it cost to change the shape of a pool?
Changing the shape of your pool starts at $30,000 for a vinyl pool and $60,000 for a concrete (gunite) pool. This is a highly invasive procedure that requires replacing the entire pool lining. The total price includes installation and materials for a new pool, plus the labor required to move earth.
Can you fill in the deep end of a pool?
Yes, changing a pool depth to make it less deep causes loss of water volume—and that’s a good thing! First, let’s break down what changes in your pool when you make its deepest area shallow. By reducing the depth, you decrease the overall volume of water the pool holds.
